Fluid Products / Automotive

TRIM 229 is a synthetic coolant that delivers maximum chemical corrosion inhibition on ferrous materials with no residual film at the lowest possible cost. TRIM 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. TRIM 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut-off machines, and water-jet cutting systems.

• Highly concentrated for very low-cost working solutions
• Keeps grinding wheels clean and the work piece cool
• Rapidly settles fines
• Nonfoaming
• Low mist
• Low odor
• Very low residue for easy cleaning
• Provides good corrosion inhibition on all common ferrous materials
• Rejects tramp oil for easy skimming and cleaning
• Easy recycling or disposal with conventional techniques and equipment

TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.

• Low mist
• Low foam
• Moderate pH
• Very low odor
• Clear working solution
• Very operator, machine, and environmentally friendly
• Will not form ammonia or other gases when grinding or machining cast iron
• Inhibits chip packing and clinkering
• Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
• Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
• Very low carryoff for extremely low fluid operating costs
• Easy recycling or disposal with conventional techniques and equipment

TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one to two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor which usually disappears after one to two days

TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
• Extremely low carryoff for very low total operation costs
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odor which dissipates further after one or two days
• Minimizes the buildup of sticky residues

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E715 is a high quality, universal, soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs very well. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurized extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminum alloys, steel alloys, nickel alloys, cast iron, and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine-free extreme-pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations while still providing the excellent non-cutting characteristics normally associated with traditional, high-quality emulsions from Master Fluid Solutions. The extreme lubricity and extreme pressure package matches heavy-duty neat oils on difficult-to-machine materials such as Inconel^®, titanium, stainless steel, and high tensile strength steels.

• Delivers exceptional lubricity and EP performance
• Has the necessary performance to replace neat oils in certain applications
• Very long sump life
• Low foam even in soft water areas
• Hard water tolerant
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM HD is a synthetic stamping fluid for light-to-moderate duty stamping, drawing, and forming and can also be used for general machining and grinding of ferrous materials. It utilizes a proprietary blend of heavy-duty boundary and extreme pressure lubricity agents for improved performance on stainless steel, super alloy, and most soft aluminum.

• Lubrication package protects machines and extends the life of the die
• Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
• Has superior anti-weld action to control built-up edge and chip welding
• Compatible with all ferrous and most nonferrous materials
• Broad range of applications by using different concentrations for different applications
• Fully compatible with most nonmetallic materials
• A superior product for low-speed, high-pressure operations such as production band sawing and drilling
• Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

TRIM MQL™ 1000 is a high-performance, vegetable ester-based, micro-lubrication fluid. It is fully compatible with all "micro lube" and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction. MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.

• Out-performs the more expensive products
• Environmentally friendly, renewable resource based
• Easily water washable — does not produce hard-to-remove residues
• Very low mist
• Promotes superior finish and tool life and is compatible with all materials
• Very high levels of lubricity with even, minimum quantities of material at the point of cut for high material removal rates
• Has been extensively tested and proven in all major brands of micro lube applicators

TRIM MicroSol 465 low-foam semisynthetic microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 465 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 465 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 465.

• Easy to maintain and hard water stable
• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminum alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 685XT is a high-lubricity, low-foaming, extended sump life semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides superior cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminum alloys, Microsol 685XT is compatible with a wide range of materials.

• High lubricity for extended tool life
• Low foaming for today's high-pressure, high-volume coolant delivery systems
• Excellent sump life without the use of tank side additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Extremely hard water stable
• Forms a tight microemulsion for low carryoff
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM OE209 is a medium to heavy-duty straight cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

• Extremely high lubricity ensures fantastic tool life
• Excellent detergency keeps grinding wheels clean
• Does not leach cobalt from carbide tool alloys
• Chlorine and sulfur free
• Readily biodegradable
• Saturated ester based formulation ensures very low foam and misting
• Very High flash point
• Unsurpassed oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OE310 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OE315 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OE322 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Extremely low misting potential even with high pressure chip-breaker units
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

• Excellent lubricity for efficient metal removal
• Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
• Will not stain
• No active sulfur or chlorine

TRIM OM 287 is a straight cutting oil designed for general machining of all metals. OM 287 has a balanced, extreme-pressure package for excellent finishes and tool life on a variety of metals.

• Excellent lubricity for efficient metal removal
• Light color and low odor for good operator acceptance
• Will not stain; runs clear
• High-quality raw materials resist oxidation
• Lower viscosity allows better cooling
• Safe for use on nonferrous as well as ferrous metals

TRIM OV 2200 is a bio-based straight oil for machining difficult alloys and stainless steels. The formula utilizes a proprietary blend of renewable resources to eliminate the need for traditional additives such as chlorine, sulfur, and animal fats. Allows users to improve their environmental profile by replacing products that contain V.O.C.

• Environmentally friendly product which is free of V.O.C., chlorine, and animal fats
• Delivers productivity improvements versus traditional mineral oils
• Improves shop environment by reducing unpleasant odors and residues
• Light colored, clean running
• Versatile formulation developed to machine difficult alloys and stainless steels
• Protects sensitive aluminum and copper alloys
• Improves oxidative stability over previous generations of vegetable oils
• Meets medical industry restrictions

TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

• Compatible with a very wide range of materials
• Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
• Will not foam, even at very high pressures and flow rates
• Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
• Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
• Easily recycled to reduce coolant purchase and disposal costs

TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

• Compatible with a very wide range of materials
• Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
• Will not foam, even at very high pressures and flow rates
• Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
• Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
• Easily recycled to reduce coolant purchase and disposal costs

TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

• Very low foam and mist
• Provides excellent corrosion inhibition on all common ferrous alloys
• Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
• Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operating costs
• Exceptional sump life and very good tramp oil rejection
• Very low initial odor level which usually disappears after one-to-two days
• Minimizes the buildup of sticky residues

TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• Proven to be highly effective in controlling built-up edge (BUE)
• Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
• Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with either water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM SOL LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

• For wide range job applications (from tough assignments such as gear hobbing and broaching to lighter duties like turning) TRIM SOL LC sf has proven equally effective
• Easily adaptable to nonferrous and ferrous metals
• Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
• Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
• Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
• Coolant residue is easily removed with either water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM SOL nd is a no dye soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• Proven to be highly effective in controlling built-up edge (BUE)
• Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
• Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with either water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

• Especially for taps up to 1" diameter
• Promotes excellent finish
• Ensures parts size control
• Delivers exceptionally long tool life
• Reduces rubbing of the tool flank
• Compatible with most TRIM fluids
• Use for added lubricity on extremely tough jobs

TRIM TC 155 is a nonferrous corrosion inhibitor for use in water soluble and straight oil systems. It is particularly effective in preventing staining and white rust on die cast alloys containing copper.

• Prevents staining and white rust on die cast alloys containing copper
• Nonferrous corrosion inhibition

TRIM TC 175 is a chlorinated EP (extreme pressure) lubrication/emulsifier additive package. It may be added to water-soluble coolant systems to replace or increase the presence of the chlorine EP additives in the system.

• New, easier to mix formulation
• New, chlorine EP additives stay in systems longer

TRIM TC 211 is an amine-based pH adjuster used to replenish depleted alkalinity in metalworking fluid working solutions. It is especially effective in central systems and batch recycling systems.

• pH adjustment
• Emulsion stabilization
• Central systems
• Replenish depleted alkalinity

TRIM TC 220 is a triazine compound that is very effective in maintaining pH and building reserve alkalinity in metalworking fluid working solutions. Controlling pH within the design range of the product and maintaining an appropriate level of reserve alkalinity are key elements in extending sump life, controlling both liquid and vapor phase corrosion, and emulsion stability of soluble oils.

• pH adjustment
• Building reserve alkalinity
• Extending sump life
• Controlling both liquid and vapor phase corrosion

TRIM TC 233 is a dual-purpose additive which is used in synthetic (e.g., TRIM C270, C276, etc.) and some semisynthetic (e.g., TRIM SC230, SC520, etc.) coolants. It can increase lubricity for operations such as drilling or tapping. At fluid temperatures above 95°F (35°C), it will act as an anti-foam.

• Increase lubricity
• Reduce friction

TRIM TC 257 is a paintable, plateable additive used to control foam in metalworking fluids and parts washing systems.

• Paintable
• Plateable

TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

• Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
• Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector^® drilling, and gundrilling or gunreaming
• Has sufficient boundary lubrication to do roll-form threading in many materials
• Superior anti-weld properties without chlorinated EP additives
• Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
• Uses standard metalworking recycling and disposal techniques

TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.

• Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
• Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector^® drilling, and gundrilling or gunreaming
• Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
• Very good anti-weld properties without the use of chlorinated EP additives
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
• Uses standard metalworking recycling and disposal techniques

Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

• Very economical way to remove heavy soils and light rust
• Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
• Can be recycled using XYBEX equipment
• Contains no solvents, borates, silicates, nitrites, or amines
• Long bath life
• Excellent compatibility with magnesium
• Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

Master STAGES™ CLEAN 2020 is a concentrate very high-performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

• Excellent cleaning in immersion and ultrasonic tanks
• Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
• An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
• Will provide extended in-process tarnish resistance on copper and copper alloy parts
• Safe on aluminum, aluminum alloy, and magnesium
• Will remove coolant residues as well as straight oils

Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

• Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
• An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
• Hard water tolerant, it provides long bath life
• Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
• This formula has very low V.O.C. content and no SARA 313 reportable ingredients
• Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

Master STAGES™ CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030's oil-rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.

• Excellent cleaning in immersion and ultrasonic tanks
• Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
• An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer
• Will provide one-to two-weeks' indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
• Will remove coolant residues as well as straight oils

Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

• Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
• Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
• Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
• Provides short-term corrosion inhibition on cast iron and ferrous alloys
• Excellent biostability
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level
• Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN 2118 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces.

• Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2118 an excellent choice where rapid buildup of coolant carryover creates a foam problem
• Provides excellent short-term corrosion inhibition on most common ferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level
• Exceptional sump life and great tramp oil rejection

Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

• With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
• Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
• CLEAN F2 has been proven nonirritating to skin at 20% concentration
• Excellent choice for use in spray bottles up to 20%
• Use for general cleaning tasks and to remove soils from parts and tools
• Operators like CLEAN F2's mild, pleasant citrus scent
• Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
• Effective mop bucket cleaner
• Use in floor scrubber machines
• Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

• An excellent cleaner and very economical to use
• Compatible with aluminum, cast iron, and steel alloys
• Rejects oil for easy skimming or centrifuging to extend bath life
• Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
• Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

Master STAGES™ NOCOR E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from in-plant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.

• Environmental approvals are simplified because NOCOR E6 is nitrite, barium, boron, phenol, and phosphate free
• NOCOR E6 is low foaming, for use in low-pressure spray washers and flow coating operations. Dip application is also a good way to apply this product
• An excellent choice where both ferrous and/or copper alloy parts are being processed
• NOCOR E6 has a moderate pH, is practically odorless, and is nonflammable for improved safety
• Working concentration ranges from 4% - 16% which translates into much lower cost than traditional straight oil/solvent products

Master STAGES™ NOCOR S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3% - 10% in water, it provides a very thin, water-soluble protective film.

• The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
• Barium free and contains very low levels of volatile organic compounds as applied

Master STAGES™ RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM family of cutting and grinding fluid concentrates.

• Effective machine cleaner
• Great for general cleaning of loose tools and parts
• Excellent for use in ultrasonic cleaner systems and immersion washers
• Provides up to one week or more of in-process corrosion inhibition on ferrous parts

Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.

• Barium free
• Light film for limited carryoff
• Excellent corrosion inhibition, generally in excess of six months in dry storage
• Nonstaining
• Provides cleaning action
• Water displacing to help prevent rust due to water trapped under the protective film
• Oxidation resistant to resist tarnishing over long storage periods
• Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
• Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)

Master STAGES™ SkidRid™ is a highly concentrated cleaner built for multiple uses including floor cleaning and general degreasing. In addition to automatic floor scrubbers, it does a great job in general purpose cleaning, mop bucket cleaning, and parts washing in room-temperature wash tanks. SkidRid is completely free of 2-butoxyethanol (Butyl) and is not reportable under SARA section 313.

• Specially formulated to lift off stubborn tire marks — pre-application from a spray bottle followed by power floor scrubbing can often deal with the most difficult areas
• Contains no 2-butoxyethanol (Butyl), an ingredient of increasing concern often found in products of this type
• All of the ingredients used in SkidRid are biodegradable
• Economical to use because it is very highly concentrated — a little bit goes a long way
• Can be used for general cleaning tasks and to remove soils from parts and tools
• Hard water tolerant
• Mild, pleasant scent
• Environmental approvals are simplified because SkidRid contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and is not SARA 313 reportable
• Effective in immersion style washers and ultrasonic baths can be used at room temperature up to 120°F (49°C)
• Effective mop bucket cleaner in addition to being useful in floor scrubber machines
• Removes heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; thereby suitable for concrete, painted tile, or linoleum floors

Master STAGES™ Skramex™ is a super concentrated, high-powered cleaner designed for factory floor cleaning and heavy maintenance cleaning, particularly in metalworking or rebuild shops and mills. This product is highly caustic and capable of emulsifying even the most difficult floor soils such as those used in machining, drawing, stamping, foundries, and mills. Skramex is specially formulated without 2-butoxyethanol (Butyl) to eliminate government reporting requirements.

• Economical because it is super concentrated, Skramex will clean most soils at concentrations of 0.5% or less when used in a power floor scrubber
• Skramex is formulated specially to remove oils, drawing compounds, carbon residue, and other heavy soils, while not harming concrete (this can be a problem with cheap floor cleaners)
• Not just a floor cleaner, Skramex works in both power floor scrubbers and mop buckets, and can be used for very heavy-duty maintenance cleaning jobs; also effective and economical when used as a cold-soak cleaner for ferrous parts
• Your floor scrubber or mop bucket will go further and last longer because Skramex has super high concentrations of surfactants, solvents, and alkaline builders to make it last a long time (this saves you time and reduces waste because you can spend more time cleaning and have less dirty water to dispose of)
• Environmental approvals are simplified because Skramex contains no nitrites, phosphates, barium, phenols, or 2-butoxyethanol (Butyl); this formula has very low V.O.C. content and no SARA 313 reportable ingredients

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws on many years of hands-on experience in machine cleanouts
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways