Solutions Products Support About Us Free Trial Find a Distributor Contact Us
Solutions Products Support About Us Free Trial
Solutions Products Support
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
Logo - TRIM<sup>®</sup> wrapped with Metalworking Fluids and Master Fluid Solutions, teal
TRIM® MicroSol® 690XT

High-lubricity, Low-foam Premium Semisynthetic

TRIM<sup>®</sup> MicroSol<sup>®</sup> 690XT - 5 gallon Pail

Description

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM® MicroSol® 690XT   
©2014-2024 Master Fluid Solutions®

Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT

Watch the video to find out what everyone at Hy-Speed Machining has to say about MicroSol 690XT! Michael Mills, General Manager, Cutting Inconel: "Tools lasted a lot longer, parts came out better." Mike Mills Jr., CNC Programmer, Cutting Inconel: "I went from twelve minutes a part to about four and a half minutes." Taylor Cooper, CNC Operator, "The coolant is tenfold to what we've been using" Weston InKrote, CNC Operator, "Tooling life went up, run time cut in half, finishes were great" Peter Duffy, Maintenance, "More profit for us"

2015-04-14, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=420.0

Download video >



Chuck Adams is Machining A Lot of Titanium with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "Our shop is starting to machine a lot of titanium products. In order to prevent micro fractures in the metal, we wanted a coolant that was nonchlorinated. With the MicroSol 690XT we achieved that purpose and also cut down on tap breaks. We were having a lot of tap wear and tap breaks trying to tap titanium. After putting in the 690XT the tapping is much better, lubricity is much higher, we’re having less failure, and our taps are lasting a lot longer!"

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=416.0

Download video >



Bradford Watts, "MicroSol® 690XT Runs at About Half the Concentration..."

Bradford Watts of Excel Manufacturing in Seymour, Indiana says, "MicroSol 690XT runs at about half the concentration level as our older style coolant. We have used less of the 690XT in the machines and that has saved us a lot of money. MicroSol 690XT keeps the tools as clean as the old product. MicroSol 690XT is probably the best coolant that we have had in my time here; and I have been here almost ten years."

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=419.0

Download video >



Chuck Adams Wants to Convert Whole Shop to MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio, stated, "After trials with the MicroSol 690XT in three of the machines, we wanted to buy the product. Three to four weeks after cleaning the machines we were having better machining. The product was not available at the time of the trial, so we changed the rest of the shop over to 685XT, which we are currently running. As soon as 690XT goes into production, we are changing the entire shop over to 690XT."

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=418.0

Download video >



Curt Metcalf Solves Reaming Problem with MicroSol® 690XT

My name is Curt Metcalf and I work at Excel Manufacturing in Seymour, Indiana. We have been testing MicroSol 690XT for about three months now on two different machines with good success. We have tested aluminum, cast iron, and ductal iron. It solved a reaming problem we had on an aluminum machining operation and and gave us good tool life. The operators like it because of the low chemical smell and the parts come clean.

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=415.0

Download video >



Chuck Adams Tapping into Fluid Savings with MicroSol® 690XT

Chuck Adams, Ace Manufacturing Company, Cincinnati, Ohio noted, "Prior to using MicroSol 690XT we were using $150 to $200 every two weeks on tapping fluid aerosol cans on all the machines. Now that we are using the TRIM coolant we don’t use any other tapping product. It is now just straight coolant with no problems."

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=417.0

Download video >



Phil Smith Eliminates Tool Breaking Issues with MicroSol® 690XT

Phil Smith, Ace Manufacturing Company, Cincinnati, Ohio, states, "Since we have switched to using MicroSol 690XT coolant, it has eliminated all my rust issues, all of my tapping and tooling breakage issues, all the odor issues, and all of the foaming issues. MicroSol 690XT has been a great coolant."

2014-12-05, US-English

To share this video, copy this URL: https://www.masterfluids.com/na/en-us/technical-information/videos.php?v=414.0

Download video >