TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel^® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

• Ease of maintenance, low carryoff, and long sump life result in low operating cost
• Clear, low foaming, low odor, and low mist create a clean manufacturing environment
• High performance in a wide range of operations from general grinding to heavy-duty machining
• Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
• Easily removed from parts before assembly, painting, or plating operations
• Product readily rejects process oils such as hydraulic and way oils
• Excellent surface finish in finish-grinding operations
• PRTR compliant

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

• Optimized combination of cooling and lubricity
• Superior resistance to corrosion on both nonferrous and ferrous materials
• Extremely low foaming in chilled environments
• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• Very low carryoff and long sump life results in low operating cost

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

• A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
• Contains highly effective extreme-pressure additives to control built-up edge
• Compatible with all ferrous and nonferrous materials
• Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E850 is a proprietary blend of new "green" vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carryoff rates result in low operating cost
• Low product odor
• Mild operator contact properties
• Provides superior results in a wide range of operations
• Excellent corrosion resistance on both nonferrous and ferrous materials
• Superior wetting and penetration to the point of cut
• Soft fluid film protects ways, chucks, and tool holders
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• High performance without the use of chlorinated paraffins

TRIM E850 is a proprietary blend of new "green" vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carryoff rates result in low operating cost
• Low product odor
• Mild operator contact properties
• Provides superior results in a wide range of operations
• Excellent corrosion resistance on both nonferrous and ferrous materials
• Superior wetting and penetration to the point of cut
• Soft fluid film protects ways, chucks, and tool holders
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• High performance without the use of chlorinated paraffins

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

• Longer operational life than competitive fluids
• Highly effective, extreme pressure additives control built-up edge
• E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
• Low odor for pleasant operating environment
• Tight emulsion reduces carryoff and gets the fluid to the point of cut
• In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
• Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
• Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Will run effectively for long periods without the need for costly additives

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

• DCHA free
• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

• DCHA free
• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

• DCHA free
• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

• DCHA free
• Extended sump life for lower operating costs
• Protects sensitive aluminum and nonferrous alloys
• Excellent lubricity without chlorinated paraffins
• Provides superior results in a wide range of operations
• Superior corrosion resistance
• Appropriate for most high-pressure systems
• Low product odor
• Mild operator contact properties
• Soft fluid film protects chucks, ways, and tool holders
• Rinses off for easy parts cleanup before assembly, painting, or plating

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.

• Conformance to EH&S requirements for the medical industry
• Improved lubricity for longer tool life
• Extended useful life without the need for tank-side biocides or fungicides
• Halogen free formulation
• Low foaming for today’s demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Superior corrosion inhibition on all ferrous and nonferrous metals
• High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Ease of disposal with no special disposal or recycling techniques or requirements

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM OE209 is a medium to heavy-duty straight cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

• Extremely high lubricity ensures fantastic tool life
• Excellent detergency keeps grinding wheels clean
• Does not leach cobalt from carbide tool alloys
• Chlorine and sulfur free
• Readily biodegradable
• Saturated ester based formulation ensures very low foam and misting
• Very High flash point
• Unsurpassed oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OE209 is a medium to heavy-duty straight cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

• Extremely high lubricity ensures fantastic tool life
• Excellent detergency keeps grinding wheels clean
• Does not leach cobalt from carbide tool alloys
• Chlorine and sulfur free
• Readily biodegradable
• Saturated ester based formulation ensures very low foam and misting
• Very High flash point
• Unsurpassed oxidation stability
• Compatible with copper containing alloys
• Light color and low odor for good operator acceptance

TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent friction reducing properties ensures long wheel life
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light color and low odor for good operator acceptance

TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent friction reducing properties ensures long wheel life
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light color and low odor for good operator acceptance

TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent lubricity and EP properties ensures long wheel life and good surface finish
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light color and low odor for good operator acceptance

TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

• Very highly refined base oil ensures low mist and high flash point
• Good flushing properties keeps grinding wheels very clean
• Excellent lubricity and EP properties ensures long wheel life and good surface finish
• Excellent heat transferring properties
• Excellent oxidation stability
• Highly filterable in pre-coat filter systems
• Low foaming
• No reaction with cobalt
• Kind to machine components and elastomers
• Light color and low odor for good operator acceptance