Number of products: 15
Application: corrosion inhibition
Metal: steels [P]
TRIM® 9106
Synthetic
TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.
Low mist
Low foam
Moderate pH
Very low odor
Clear working solution
Very operator, machine, and environmentally friendly
Will not form ammonia or other gases when grinding or machining cast iron
Inhibits chip packing and clinkering
Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
Very low carryoff for extremely low fluid operating costs
Easy recycling or disposal with conventional techniques and equipment
TRIM® C270
High-performance Synthetic
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one-to-two days
Master Fluid Solutions, A World Leader in Aerospace-Approved Metalworking Fluids
TRIM® C270 bd
High-performance Synthetic - Blue Dye
TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one-to-two days
TRIM® C270CG
High-performance Synthetic
TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C270CG bd
High-performance Synthetic - Blue Dye
TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C390
High Performance Aerospace Synthetic
TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.
Optimized combination of cooling and lubricity
Superior resistance to corrosion on both nonferrous and ferrous materials
Extremely low foaming in chilled environments
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® E925
Chlorine-free, High-performance Emulsion
TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.
Extended sump life for lower operating costs
Protects sensitive aluminum and nonferrous alloys
Excellent lubricity without chlorinated paraffins
Provides superior results in a wide range of operations
Superior corrosion resistance
Appropriate for most high-pressure systems
Low product odor
Mild operator contact properties
Soft fluid film protects chucks, ways, and tool holders
Rinses off for easy parts cleanup before assembly, painting, or plating
TRIM® E925AE
DCHA-free, High-performance Emulsion
TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.
DCHA free
Extended sump life for lower operating costs
Protects sensitive aluminum and nonferrous alloys
Excellent lubricity without chlorinated paraffins
Provides superior results in a wide range of operations
Superior corrosion resistance
Appropriate for most high-pressure systems
Low product odor
Mild operator contact properties
Soft fluid film protects chucks, ways, and tool holders
Rinses off for easy parts cleanup before assembly, painting, or plating
TRIM® MicroSol® 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT
TRIM® MicroSol® 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications and has received many aerospace approvals
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol® 590XT
TRIM® SC230
Oil-rejecting Semisynthetic
TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials
Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam, even at very high pressures and flow rates
Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC230CG
Oil-rejecting Semisynthetic
TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials
Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam, even at very high pressures and flow rates
Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC230CG nd
Oil-rejecting Semisynthetic - No Dye
TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials
Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam, even at very high pressures and flow rates
Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC230 nd
Oil-rejecting Semisynthetic - No Dye
TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.
Compatible with a very wide range of materials
Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
Will not foam, even at very high pressures and flow rates
Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
Easily recycled to reduce coolant purchase and disposal costs
TRIM® SC536
Low-oil Semisynthetic
TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operating costs
Exceptional sump life and very good tramp oil rejection
Very low initial odor level which usually disappears after one-to-two days