TRIM

BUSAN® 77

Biocide

40 lb. container minimum batch order size. Pricing and delivery available upon request.



BUSAN® 77 is a cationic polymeric microbicide registered for use in metalworking fluids. This product should be used in accordance with the label instructions only. BUSAN® is the registered trademark of the Buckman Laboratories, Inc.


TRIADINE® 10

Fungicide

TRIADINE® 10 is a mixture of both a broad spectrum biocide and a broad spectrum fungicide. This product should be used in accordance with the label instructions only. TRIADINE® is a registered trademark of Arch Chemical, Inc.


TRIM® 229

Corrosion-inhibiting Synthetic

TRIM 229 is a synthetic coolant that delivers maximum chemical corrosion inhibition on ferrous materials with no residual film at the lowest possible cost. TRIM 229 is often used in surface grinding where maximum cooling and minimum foam are desirable. TRIM 229 is also used in other situations including: water tables on plasma torches, leak detection dip tanks, abrasive cut-off machines, and water-jet cutting systems.

  • Highly concentrated for very low-cost working solutions
  • Keeps grinding wheels clean and the work piece cool
  • Rapidly settles fines
  • Nonfoaming
  • Low mist
  • Low odor
  • Very low residue for easy cleaning
  • Provides good corrosion inhibition on all common ferrous materials
  • Rejects tramp oil for easy skimming and cleaning
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® 229 bd

    Straight Chemical Concentrate

    Same as TRIM 229 but with a blue dye.


    TRIM® 229NF

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® 41-3A

    Cutting and Grinding Fluid Concentrate


    TRIM 41-3A is a low foam, high lubricity soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The very high levels of both chemical and mechanical lubricity in this product handle the toughest machining and grinding jobs. The stable and predictable performance of 41-3A makes it a first choice for high-quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Highly effective extreme pressure (EP) additives control built-up edge (BUE)
  • Very wide application range allowing its effective use on such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, surface, pocket and thread milling
  • Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
  • In high-speed turning and milling, 41-3A has the right balance of cooling and lubrication to provide good tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
  • Coolant is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Does not contain or test positive for phenol
  • Will run effectively for long periods without the need for costly additives

  • TRIM® 5050

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® 7030

    Cutting and Grinding Fluid Concentrate

    TRIM 7030 is a chemical surface active or synthetic coolant concentrate designed for general machining and grinding of ferrous materials. TRIM 7030 contains no sulfur, chlorine, or phosphorus and meets the requirements of even the most restrictive chemical specifications.

  • Provides rapid and effective cooling
  • Keeps grinding wheels clean and free of loading
  • Compatible with ferrous and nonferrous metals as well as most nonmetallic materials
  • Is exceptionally clean and oil free to promote a clean, safe work environment
  • Will not smoke
  • Is hard water tolerant
  • Will keep your machines clean while leaving a soft, fluid residue that protects the bare metal parts of your machine tools

  • TRIM® 9106

    Synthetic

    TRIM 9106 is a clear, virtually odorless, synthetic coolant with excellent heat dissipating and corrosion inhibiting qualities. Recommended for grinding operations on cast iron, aluminum, and steels. Will not form ammonia when grinding cast iron and allows graphite to float and prevents swarf from clinkering when grinding cast iron. Contains no sulfur, phosphorus, chlorine, or other halogens.

  • Low mist
  • Low foam
  • Moderate pH
  • Very low odor
  • Clear working solution
  • Very operator, machine, and environmentally friendly
  • Will not form ammonia or other gases when grinding or machining cast iron
  • Inhibits chip packing and clinkering
  • Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Very low carryoff for extremely low fluid operating costs
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® 9106CS

    Clear Low Foaming Synthetic Coolant

    TRIM 9106CS is a synthetic cutting and grinding fluid concentrate. It is intended for situations where high heat removal, broad chemical compatibility, and maximum sump life are desired. TRIM 9106CS is particularly suited for surface grinding, turning, and milling of cast iron, mild steel, and many nonferrous materials. It is frequently very successful in central coolant delivery systems, critical path machines or systems where predictable performance is the critical issue.

  • As manufactured, contains no sulfur, phosphorus, or chlorine
  • Will not form ammonia or other gases when grinding or machining cast iron
  • Inhibits chip packing and clinkering
  • Low mist, odor, and foam
  • Compatible with brass, aluminum, and lead serrations on magnetic grinding chucks
  • Coolant residue is easily cleaned up with either water or working solution
  • Very low carryoff for extremely low fluid operating costs
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® 9106CS bd

    Clear Low-Foaming Synthetic Coolant

    Same as TRIM 9106CS but with a blue dye.


    TRIM® 9106WA

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® BIO BAN CS1246





    TRIM® C110

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® C111

    Light-Duty Machining and Grinding Fluid

    TRIM C111 is a synthetic cutting and grinding fluid concentrate designed for the shop that does primarily ferrous materials and prefers to use a product that contains no oil. It is particularly effective in high-speed, high-volume surface or cylindrical grinding, turning, or milling of cast iron and mild steels.

  • Low carryoff for reduced coolant usage and cleaner, dryer, and lighter chips
  • Low to moderate foam in most flood type applications
  • Clear for good operator visibility
  • Low odor and mist
  • Resists the formation of cast iron clinkers
  • Increases the efficiency of positive media filter when machining or grinding cast iron
  • Rejects tramp oil for easy skimming and recycling
  • Has superior sump life
  • Easy recycling or disposal with conventional techniques and equipment
  • Good compatibility with nonmetallic materials (plastics, rubbers, and composite, etc.)

  • TRIM® C115

    Synthetic

    TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

  • Does an excellent job in most glass, ceramic, and composite grinding applications
  • Excellent corrosion inhibition on most common ferrous and nonferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level which usually disappears after one-to-two days
  • Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
  • Exceptional sump life and very good tramp oil rejection

  • TRIM® C160ALW

    Cutting and Grinding Fluid Concentrate

    TRIM C160ALW is a synthetic cutting and grinding fluid concentrate. It is designed to take advantage of the newest synthetic technology to provide a clean, long-lived, oil-free product for the manufacture of aluminum die cast wheels and other high value die cast aluminum parts.

  • Very clean low residue fluid that is easily washed off to reduce cleaning costs and improve finishing operation performance
  • Provides superior protection against oxidation, mixed metal and galvanic corrosion to provide clean, stain-free parts
  • While primarily intended for machining die cast parts, it is fully compatible with other ferrous and nonferrous materials and is compatible with many nonmetallic materials as well
  • Extremely low carryoff for very low total operation costs
  • Low foam, odor and mist
  • Offers good performance in central systems
  • Exceptional sump life and good tramp oil rejection
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® C270

    High-performance Synthetic

    TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

  • TRIM® C270 bd

    High-performance Synthetic - Blue Dye

    TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

  • TRIM® C270CG

    High-performance Synthetic

    TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

  • TRIM® C270CG bd

    High-performance Synthetic - Blue Dye

    TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor which usually disappears after one to two days

  • TRIM® C275

    Synthetic

    TRIM C275 is a synthetic coolant that excels where the primary operations are high-speed turning and milling on ferrous metals. New nonchlorinated technology ensures maximum performance and compliance with the most demanding environmental standards, high levels of cooling, and control of chip welding and built-up edge. C275 has the mechanical lubricity previously found only in high-oil semisynthetics. This increased mechanical lubricity facilitates tapping and reaming operations in some materials. C275 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a fluid, resoluble protective film.

  • Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
  • Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Very low initial odor level which usually disappears after one-to two-days
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools. This film is easily washed off with coolant working solution for easy machine cleaning
  • Minimizes the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection

  • TRIM® C276

    Clean-running Synthetic

    TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Low initial charge odor which dissipates further after one or two days
  • Minimizes the buildup of sticky residues

  • TRIM® C320

    High-lubricity Synthetic

    TRIM C320 is a high-lubricity, low-foam, synthetic coolant that approaches the "down-the-hole" machining performance of premium soluble oils. This product is exceptionally good on aluminum. Even with its very high performance, C320 meets or exceeds most stringent environmental standards.

  • Excellent extreme pressure (EP) lubricity to do many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
  • A very versatile product which works well in mixed-metal situations
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal
  • Operators like C320's very low odor, low foam, low mist, and light yellow working solution
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection
  • C320 is a super product for aluminum wheel machining

  • TRIM® C320 bd

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® C320AL

    Synthetic Cutting and Grinding Fluid Concentrate




    TRIM® C350

    Premium Synthetic Metalworking Fluid

    TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® C380

    Premium Ferrous Machining Synthetic

    TRIM C380 is a premium, synthetic, metalworking fluid optimized for high-tech ferrous materials including stainless steel and Inconel® which are widely used in aerospace, medical, and the electronics industries. C380 uses the best of the new ester technology to yield a very-high performance metal removal fluid that is easy-to-use and maintain. The combination of the proven synthetic ester technology and nonhalogenated EP package produce very high levels of usable lubricity at the point of cut. C380 utilizes unique low-foam detergents to keep process soils from redepositing on machines and parts.

  • Ease of maintenance, low carryoff, and long sump life result in low operating cost
  • Clear, low foaming, low odor, and low mist create a clean manufacturing environment
  • High performance in a wide range of operations from general grinding to heavy-duty machining
  • Superior resistance to corrosion on ferrous materials including; titanium, Inconel, and high strength alloy steels
  • Easily removed from parts before assembly, painting, or plating operations
  • Product readily rejects process oils such as hydraulic and way oils
  • Excellent surface finish in finish-grinding operations
  • PRTR compliant

  • TRIM® C390

    High Performance Aerospace Synthetic

    TRIM C390 is a high performance aerospace synthetic coolant customized for the machining of composites for the global aerospace industry. C390 uses a proprietary synthetic lubricant technology to provide the lubricity of soluble oil without the oily residue. This formula is extremely low foaming in all types of environments including chilled systems with a minimum temperature of 60˚F.

  • Optimized combination of cooling and lubricity
  • Superior resistance to corrosion on both nonferrous and ferrous materials
  • Extremely low foaming in chilled environments
  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Very low carryoff and long sump life results in low operating cost

  • TRIM® CAC100

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® CE/CE2

    Chemical Emulsion Concentrate

    TRIM CE/CE2 soluble oil coolant concentrate is a well-proven, general-purpose multi-metal coolant for machining ferrous and nonferrous materials. It has the lubricity and guts necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Contains a proven highly effective extreme pressure (EP) additive to control built-up edge (B.U.E.)
  • Uses a nonphenolic emulsion stabilizer system and does not test positive on the 2 AAP test
  • Has a very wide application range for use on such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing and replacing straight oil on some types of screw machines
  • Leaves a soft, nongumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, coolant working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® CE/CE2 nd

    Multi-metal Emulsion
    1 drum minimum batch order size. Pricing and delivery available upon request.

    TRIM CE/CE2 nd soluble oil coolant concentrate is a well-proven, general-purpose, multi-metal coolant for machining ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Contains a proven highly-effective, extreme-pressure, (EP) additive to control built-up edge (B.U.E.)
  • Uses a nonphenolic emulsion stabilizer system and does not test positive on the 2 AAP test
  • Has a very wide application range for use on such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a soft, nongumming residue to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, coolant working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® CE/CE2 ndsf

    Chemical Emulsion Concentrate

    Same as TRIM CE/CE2 but without dye and siloxane-free.


    TRIM® CE/CE2 sf

    Chemical Emulsion Concentrate

    Same as TRIM CE/CE2 but siloxane free.


    TRIM® CE2K

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® CNC

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® COMSOL

    Water Miscible Cutting and Grinding Fluid Concentrate




    DTC12X32





    TRIM® E190

    Chlorine-free Emulsion

    TRIM E190 is a chemical emulsion (soluble oil) cutting and grinding fluid that is an all-around proven performer in machining most ferrous and nonferrous materials, including aluminum, zinc, die cast, and most aerospace alloys.

  • Environmentally and machine friendly - contains no chlorine or sulfur EP additives, phenols, nitrites, or triazine compounds
  • Extremely tight emulsion for superior wetting and low carryoff
  • Provides superior results in a wide range of operations from general grinding to production hobbing
  • Superior lubricity for high torque, low SFPM jobs like drilling and tapping in soft, gummy materials
  • Easily removed from parts for easy cleanup before painting and plating operations
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Will meet most nuclear and aerospace requirements as well as Mil Std 767

  • TRIM® E206

    Long-life Emulsion

    TRIM E206 is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® E206 nd

    Long-life Emulsion - No Dye

    TRIM E206 nd is a soluble oil (emulsion) coolant that performs extremely well in a wide range of machining operations on both ferrous and nonferrous materials. It has the lubricity and "guts" necessary for heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • A very versatile product which works in a wide range of operations such as heavy-duty broaching, gear hobbing, surface and centerless grinding, and replacing straight oil on some types of screw machines
  • Contains highly effective extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Extremely stable emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
  • Rejects tramp oil to help extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® E237

    Cutting and Grinding Fluid Concentrate


    TRIM E237 is a chemical emulsion (soluble oil) cutting and grinding fluid that is effective in the general machining of both ferrous and nonferrous materials. It has shown superior machining results on materials as diverse as high-temperature aerospace alloys and die cast. Additionally, this is one of the few products that can be recommended, with the use of special precautions, for machining magnesium and magnesium die cast material.

  • Environmentally and machine friendly - contains no chlorine or sulfur EP additives, phenols or nitrites
  • Works well in operations as diverse as general grinding and production milling
  • Extremely tight emulsion for superior wetting, great cooling and low carryoff
  • Hard water tolerant
  • Superior mechanical lubricity for high torque, low SFPM jobs such as drilling and tapping in soft, gummy materials
  • Easily removed from parts for simple clean up before painting and plating operations
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs

  • TRIM® E237 bd

    Cutting and Grinding Fluid Concentrate - Blue dye

    TRIM E237 bd is a chemical emulsion (soluble oil) cutting and grinding fluid that is effective in the general machining of both ferrous and nonferrous materials. It has shown superior machining results on materials as diverse as high-temperature aerospace alloys and die cast. Additionally, this is one of the few products that can be recommended, with the use of special precautions, for machining magnesium and magnesium die cast material.

  • Environmentally and machine friendly - contains no chlorine or sulfur EP additives, phenols or nitrites
  • Works well in operations as diverse as general grinding and production milling
  • Extremely tight emulsion for superior wetting, great cooling and low carryoff
  • Hard water tolerant
  • Superior mechanical lubricity for high torque, low SFPM jobs such as drilling and tapping in soft, gummy materials
  • Easily removed from parts for simple clean up before painting and plating operations
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs

  • TRIM® E700

    Metalworking Fluid Concentrate

    TRIM E700 is a soluble oil (emulsion) coolant that is ideal for machining and grinding "free machining" yellow metals.

  • E700 is compatible with all ferrous and nonferrous materials but is specifically designed for "free machining" yellow metals
  • Will not form the sticky, water insoluble residues often created when machining "free machining" materials
  • Will not stain or darken brass or other yellow metal alloys
  • This product has a very fine emulsion which helps to get the fluid to the "point of cut"
  • Provides sufficient mechanical lubricity to run well in older style screw, dial index, and trunnion machines yet is very effective in newer, high velocity CNC machines including most Swiss style machines
  • E700 rejects tramp oil to extend sump life and increase recycling options
  • A soft, fluid film prevents sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or TRIM CLEAN aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • E700 is a very stable product, with long sump life and minimal carryoff for low operating cost

  • TRIM® E815

    Chlorine-free Emulsion

    Based on the newest synthetic ester technology, TRIM E815 gives you very high performance with a "green" environmental profile. E815 is a proven, superior product for cutting and grinding high strength steel and stainless steel, aluminum, zinc, die cast, and aerospace alloys.

  • Environmentally friendly - contains no chlorine based EP additives, phenols, nitrites, or silicones
  • Extremely tight emulsion delivers superior wetting and penetration to the point of cut which improves cooling and extends tool life
  • Very low carryoff and long sump life results in low operating cost
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacturing
  • Superior lubricity for high torque, low SFPM jobs, such as drilling and tapping in gummy materials like stainless steels, wrought aluminum, hardened alloy steels, and exotics
  • Performs well in hard water
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • Chips and residues are easily washed away with coolant working solution, while E815’s soft, fluid film protects ways, chucks, and tool holders
  • An outstanding choice for use on steels, exotic alloys, aluminum and yellow metal alloys, as well as most nonmetallic materials
  • Meets most nuclear and aerospace chemical requirements

  • TRIM® E850

    Premium Emulsion

    TRIM E850 is a proprietary blend of new "green" vegetable-based technology and premium traditional lubricity additives to yield a very high-performance, easy-to-maintain metal removal fluid. This premium emulsion is operator friendly because of its mild contact nature and low chemical initial-charge odor. E850 is robust enough to deliver extended useful life and avoid rancid odors normally associated with traditional emulsions. The unparalleled physical lubricity delivers exceptional surface finish on difficult-to-machine aluminum alloys, exotics, stainless, and high-tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carryoff rates result in low operating cost
  • Low product odor
  • Mild operator contact properties
  • Provides superior results in a wide range of operations
  • Excellent corrosion resistance on both nonferrous and ferrous materials
  • Superior wetting and penetration to the point of cut
  • Soft fluid film protects ways, chucks, and tool holders
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • High performance without the use of chlorinated paraffins

  • TRIM® E906

    Premium, Low-foaming Emulsion

    TRIM E906 is a premium, low-foaming formula combining the newest available technology with our proven emulsion-based cutting platform. E906 delivers consistent machining and grinding performance on a wide range of materials and applications. The stable and predictable performance of E906 makes it a first choice for manufacturers doing work for industries as diverse as aerospace, automotive, energy, and specialty job shops. E906 offers a unique blend of both mechanical and extreme pressure lubricity agents.

  • Longer operational life than competitive fluids
  • Highly effective, extreme pressure additives control built-up edge
  • E906 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
  • Low odor for pleasant operating environment
  • Tight emulsion reduces carryoff and gets the fluid to the point of cut
  • In high-speed turning and milling, E906 has the right balance of cooling and lubrication to provide great tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E917

    Low-foam, High Lubricity Emulsion

    TRIM E917 is a low foam, high lubricity emulsion oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The very high levels of both chemical and mechanical lubricity in this product handle the toughest machining and grinding jobs. The stable and predictable performance of E917 makes it a first choice for high quality, consistent parts manufacturing.

  • Very stable formula provides long operational life with consistent performance
  • Highly effective extreme pressure additives control built-up edge
  • E917 is effective in a wide range of operations from production surface and centerless grinding to heavy-duty broaching, gear hobbing, surface, pocket, and thread milling
  • Tight emulsion reduces carryoff and gets the fluid to the point of cut
  • In high-speed turning and milling, E917 has the right balance of cooling and lubrication to provide great tool life and surface finishes
  • Low foam and low mist make it a first choice for high-pressure, high-volume coolant systems
  • Protects the machine tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
  • Coolant is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E923

    Chlorine-free, Extreme-lubricity Emulsion

    TRIM E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine-free extreme-pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations while still providing the excellent non-cutting characteristics normally associated with traditional, high-quality emulsions from Master Fluid Solutions. The extreme lubricity and extreme pressure package matches heavy-duty neat oils on difficult-to-machine materials such as Inconel®, titanium, stainless steel, and high tensile strength steels.

  • Delivers exceptional lubricity and EP performance
  • Has the necessary performance to replace neat oils in certain applications
  • Very long sump life
  • Low foam even in soft water areas
  • Hard water tolerant
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

  • TRIM® E925

    Chlorine-free, High-performance Emulsion

    TRIM E925 utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator friendly environment.

  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

  • TRIM® E925AE

    DCHA-free, High-performance Emulsion

    TRIM E925AE utilizes a proprietary lubricity package to deliver exceptional surface finish and tool life on difficult-to-machine aerospace materials. Designed to lower total cost and improve manufacturing efficiency thanks to extended sump life. Environmentally friendly emulsion is free of DCHA, boron, chlorinated paraffins, and other halogens. Mild contact nature and low initial-charge odor provide an operator-friendly environment.

  • DCHA free
  • Extended sump life for lower operating costs
  • Protects sensitive aluminum and nonferrous alloys
  • Excellent lubricity without chlorinated paraffins
  • Provides superior results in a wide range of operations
  • Superior corrosion resistance
  • Appropriate for most high-pressure systems
  • Low product odor
  • Mild operator contact properties
  • Soft fluid film protects chucks, ways, and tool holders
  • Rinses off for easy parts cleanup before assembly, painting, or plating

  • TRIM® EDM 30

    Metalworking fluid




    TRIM® EDM 40

    Metalworking Fluid




    TRIM® EU E237





    TRIM® GRIND WC

    Carbide Grinding Synthetic

    TRIM GRIND WC minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WC is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

  • Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
  • Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks
  • Is not stripped out by conventional filtration systems
  • Operators like GRIND WC’s clear working solution for superior visibility while grinding
  • Exceptional sump life and good tramp oil rejection for easy skimming
  • Resists oxidation and varnishing
  • Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
  • Very low carryoff equals low fluid makeup costs
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® HD

    Heavy-duty Synthetic

    TRIM HD is a synthetic (chemical surface active) coolant concentrate used for general machining and grinding of ferrous materials. It utilizes a heavy-duty, chlorinated EP additive package for improved performance on stainless steel, super alloy, and most soft aluminum.

  • Provides rapid and effective cooling and reduces machining forces through the use of EP additives and boundary lubricants
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with all ferrous and most nonferrous materials
  • Broad range of applications by using different concentrations for different applications
  • Fully compatible with most nonmetallic materials
  • A superior product for low-speed, high-pressure operations such as production band sawing and drilling
  • Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

  • TRIM® Hi Vis

    Cutting Fluid Concentrate




    TRIM® HM

    Cutting and Grinding Fluid Concentrate

    TRIM HM is a synthetic cutting and grinding fluid concentrate. It was developed to facilitate the manufacture of cutting tools from High-Speed Steels (HSS), Chill Cast Alloys, and other high-strength, high-hardness tool materials. TRIM HM is intended for situations where high-heat removal and low working concentrations are critical. TRIM HM is particularly suited for surface grinding and similar operations requiring maximum heat transfer. It is often used effectively in double disc grinders, belt grinding, and abrasive cutoff operations on ferrous materials.

  • Is water clear with a fluorescent green tint to facilitate the operators view of the work piece
  • Even at very low concentrations it has extended sump life
  • Settles chips and swarf rapidly and lends itself to very high flux rates in positive media filtration
  • Low mist and odor
  • Very low foam even at very high pressures and flow rates
  • Low foaming wetting agents to keep the wheel clean and prevent wheel loading
  • Will not attack super abrasives or their wheel bonding systems
  • Coolant residue is easily cleaned up with either water or working solution
  • Rejects tramp oil for easy skimming and recycling
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® HM bd

    Cutting and Grinding Fluid Concentrate

    Same as TRIM HM but with a blue dye.


    TRIM® HMND

    Water Miscible Cutting and Ggrinding Fluid Concentrate




    TRIM® HyperSol™ 888NXT

    neo-synthetic precision aerospace machining fluid

    Experience ultimate versatility
    HyperSol 888NXT's patented neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
    See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!

  • exceptional performance on hard aerospace metals
  • superior lubricity for machining softer aluminum alloys
  • patented technology
  • trouble-free production
  • safest, environmentally-friendly ingredients
  • long-running lifespan delivers high customer value
  • less scrap, low foam and low odor

  • TRIM® LP 265

    Cutting and Grinding Fluid Concentrate

    TRIM LP 265 is a high oil, microemulsion style coolant concentrate. While TRIM LP 265 was originally designed to do cast iron on dial index machines and transfer lines, it has found acceptance in a wide variety of operations where the need for superior wetting and mechanical lubrication are the key requirements.

  • Is compatible with a very wide range of materials, but is particularly suited for machining cast irons that produce a discontinuous chip
  • Will do high performance production drilling, reaming and threading operations on most cast irons
  • Has sufficient mechanical lubrication to allow the use of most piloted tools
  • Eliminates the hot chip problems often found in cast iron chip hoppers
  • Controls cast iron clinkering problems that inhibit machine operation
  • Will keep machines very clean while leaving a fluid oily residue to lubricate exposed machine parts for reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® LP 80

    Synthetic Cutting and Grinding Fluid

    TRIM LP 80 is a very low viscosity cutting oil intended for the high velocity machining of brass and other easy to machine nonferrous materials.

  • Will not stain brass or aluminum parts
  • Easily pumped
  • Easily spun off of chips for low carry off and low operating cost
  • A clean and very stable oil for very low residue

  • TRIM® LP80 nd

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® LP80NDSF

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 150

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 165

    Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 167

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 185

    Semisynthetic Metalworking Fluid

    TRIM MicroSol 185 is a high-lubricity, semisynthetic, microemulsion coolant concentrate. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Compatible with a very wide range of material including cast iron, steels, copper, aluminum alloys, and many plastics and composites
  • Provides superior corrosion inhibition on cast iron and eliminates “hot chip” and clinkering problems
  • Contains no nitrites, phenols, chlorinated additives, or sulfur additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 185AF

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 265

    Cutting and Grinding Fluid Concentrate

    A high oil micro emulsion cutting and grinding fluid concentrate. TRIM MicroSol 265 has a heavy duty third generation lubricity package that gives it exceptional machining characteristics in a broad range of applications and materials.


    TRIM® MicroSol® 266

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® MicroSol® 455

    Low-foam Ferrous Semisynthetic

    TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

    Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

  • Low foaming for today's demanding high-pressure, high-volume applications
  • Also for machining some aluminum alloys and nonferrous metals
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling

  • TRIM® MicroSol® 485

    Long-life Ferrous Semisynthetic

    TRIM MicroSol 485 is a long life semisynthetic, microemulsion coolant designed for ferrous metalworking operations and optimized for difficult working environments associated with cast iron. MicroSol 485 prevents leaching of elemental iron and thus eliminates clinkering and oxidation of ferrous micro fines. Formula delivers extended sump life versus previous generation semisynthetics. It provides excellent cooling along with the machine-friendly characteristics you expect from TRIM coolants. MicroSol 485 is value-priced and specifically designed for use on ferrous metals.

  • The most cost conscience MicroSol offering
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 585

    Nonchlorinated Semisynthetic Metalworking Fluid

    TRIM MicroSol 585 is a high-lubricity, semisynthetic, microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585 has proven to be an exceptional machining fluid for titanium alloys. MicroSol 585 has a Pratt & Whitney approval number (PMC 9362).

  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of biocides or fungicides
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 585XT

    Extended-life, Nonchlorinated Semisynthetic

    TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 590XT

    Advanced Technology Aerospace Semisynthetic

    TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

  • TRIM® MicroSol® 606

    Long-life Microemulsion

    TRIM MicroSol 606 is a microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

  • TRIM® MicroSol® 606 bd

    Long-life Microemulsion - Blue Dye

    TRIM MicroSol 606 bd is a blue dyed, microemulsion semisynthetic coolant made specifically for machining aluminum, steel, and alloy steel. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Versatile product that does an outstanding job in milling, drilling, and tapping cast or wrought aluminum, vertical or horizontal machining center work on alloy steel, surface and centerless grinding, and in general-purpose, job shop operations
  • Contains very effective, extreme-pressure additives to control built-up edge
  • Compatible with all ferrous and nonferrous materials
  • Very fine emulsion gets to the point of cut
  • Rejects tramp oil to extend sump life and increase recycling options
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution, or Master STAGES™ aqueous cleaners
  • Easily recycled or disposed of with conventional techniques and equipment
  • Very stable with long sump life and minimal carryoff
  • Runs for long periods without the need for costly additives

  • TRIM® MicroSol® 685

    High-lubricity Semisynthetic Metalworking Fluid

    TRIM MicroSol 685 is a high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Has exceptional sump life without the use of tank side additives
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

  • TRIM® MicroSol® 685lf

    High-lubricity, Low-foam Semisynthetic

    TRIM MicroSol 685lf is a high-lubricity, low-foaming, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant.

  • Low foam and low mist make it an excellent choice for high-pressure, high-volume coolant systems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Reduces oil mist and residues often associated with high-lubricity alternatives
  • Has exceptional sump life without the use of tank side additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques
  • Performs well where traditional soluble oils may not cool sufficiently

  • TRIM® MicroSol® 690XT

    High-lubricity, Low-foam Premium Semisynthetic

    TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Boron and halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MicroSol® 692XT

    Premium, High-lubricity, Low-foam Microemulsion

    TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

  • Improved lubricity for longer tool life
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Halogen free
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Requires no special disposal or recycling techniques

  • TRIM® MicroSol® 695

    Premium Nonhalogenated Semisynthetic

    TRIM MicroSol 695 is a premium high-lubricity, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant.

  • Excellent alternative to chlorinated soluble oils and semisynthetics on high-silica aluminum alloys
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Reduces oil mist and residues often associated with high lubricity alternatives
  • Delivers cost-effective performance as required in the automotive industry, yet meets the demanding standards of aerospace manufacturers
  • Contains no chlorinated compounds, nitrites, triazines, phenols, or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Forms stable microemulsion in hard water environments
  • Compatible with a very wide range of material including aluminum, magnesium and copper alloys, cast iron, and many plastics and composites
  • Provides exceptional sump life
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® MINLUBE





    TRIM® MIST

    Synthetic Misting Fluid

    TRIM MIST is a surface active synthetic coolant concentrate for spray mist operations. It is a clear and virtually odorless fluid that controls the overspray that is common with standard cutting and grinding fluids. It works well in cutting/grinding operations or where spray mists are used on boring mills and high-speed face milling.

  • Provides rapid and effective cooling
  • Keeps grinding wheels clean and free of loading
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with all ferrous and most nonferrous materials
  • Compatible with most nonmetallic materials
  • Has very low odor and is pleasant to work with
  • Contains no oil to leave slippery films on the work piece, the machine, or in the surrounding area
  • Has a very low initial odor level which usually disappears after using for one-to-two days
  • Will keep your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools
  • Has exceptional sump life and very good tramp oil rejection

  • TRIM® MQL™ 1000

    Minimum Quantity Lubrication Fluid

    TRIM MQL™ 1000 is a high-performance, vegetable ester-based, micro-lubrication fluid. It is fully compatible with all "micro lube" and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction. MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.

  • Out-performs the more expensive products
  • Environmentally friendly, renewable resource based
  • Easily water washable — does not produce hard-to-remove residues
  • Very low mist
  • Promotes superior finish and tool life and is compatible with all materials
  • Very high levels of lubricity with even, minimum quantities of material at the point of cut for high material removal rates
  • Has been extensively tested and proven in all major brands of micro lube applicators

  • TRIM® NAS200

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® OCA

    Clear Anti-weld, Extreme-pressure Oil Additive

    TRIM OCA is a clear oil additive containing chlorinated paraffins. OCA has outstanding anti-welding and extreme pressure properties at moderate to heavy speeds and loads.

  • Good lubricity properties in addition to anti-weld
  • Used with great success to extend the life of taps and form tools in screw machining operations
  • Particularly effective on ferrous metals and aluminum
  • Compatible with all TRIM straight oils, TRIM TAP LIGHT, and TRIM TAP HEAVY

  • TRIM® OD 250

    Straight Oil

    TRIM OD 250 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OD 250 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat. OD 250 is also an excellent choice for carbide, quartz, and ceramic grinding operations.

  • Well-balanced, extreme-pressure additive package for a wide variety of applications
  • Light color
  • Low odor
  • Viscosity and lubricity balanced for creepfeed grinding, deep-hole drilling, and fine surface grinding

  • TRIM® OE105

    Ester Based Superfinishing Oil

    TRIM OE105 is an ester based straight grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity while keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Very high lubricity
  • Great detergency
  • Fully saturated ester ensures unsurpassed oxidation stability
  • Ester based formulation ensures very low misting potential
  • Very high flash point for such a low viscosity product
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE209

    Ester Based Cutting and Grinding Oil

    TRIM OE209 is a medium to heavy-duty straight cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximize tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.

  • Extremely high lubricity ensures fantastic tool life
  • Excellent detergency keeps grinding wheels clean
  • Does not leach cobalt from carbide tool alloys
  • Chlorine and sulfur free
  • Readily biodegradable
  • Saturated ester based formulation ensures very low foam and misting
  • Very High flash point
  • Unsurpassed oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE310 NS

    Vegetable Ester Based Cutting Oil

    TRIM OE310 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE315 NS

    Vegetable Ester Based Cutting Oil

    TRIM OE315 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE315 NS is especially effective in deep hole drilling applications due to its reasonably low viscosity, lubricity and EP performance.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Low viscosity ensures excellent chip removal in deep-hole drilling
  • Ester based formulation ensures very low misting potential
  • Very high flash point
  • Good oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE322 NS

    Ester Based Straight Cutting Oil

    TRIM OE322 NS is a heavy-duty straight cutting oil formulated using renewable vegetable esters. For use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE322 NS is especially effective in modern, high performance lathes with high pressure chip-breaker units.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE330 NS

    Vegetable Ester Based Cutting Oil

    TRIM OE330 NS is a very heavy-duty straight cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion resistant steel alloys. TRIM OE330 NS is especially effective in slow speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high odor neat oils used in Sunnen honing machines.

  • Excellent extreme-pressure additive package for efficient metal removal
  • Extremely high lubricity ensures fantastic tool life
  • Extremely low misting potential even with high pressure chip-breaker units
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OE335

    Vegetable Ester Based Cutting Oil

    TRIM OE335 is a heavy-duty straight cutting oil formulated using renewable vegetable esters. The product is certified as readily biodegradable. TRIM OE335 is designed for use in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE335 has the lubricity and EP performance to maximize tool life in operations such as gear hobbing.

  • Extremely high lubricity ensures fantastic tool life
  • Readily biodegradable
  • Ester based formulation ensures very low misting potential
  • Very High flash point
  • Excellent oxidation stability
  • Compatible with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OG108

    High Performance Tool Grinding Oil

    TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

  • Very highly refined base oil ensures low mist and high flash point
  • Good flushing properties keeps grinding wheels very clean
  • Excellent friction reducing properties ensures long wheel life
  • Excellent heat transferring properties
  • Excellent oxidation stability
  • Highly filterable in pre-coat filter systems
  • Low foaming
  • No reaction with cobalt
  • Kind to machine components and elastomers
  • Light color and low odor for good operator acceptance

  • TRIM® OG210

    General Cutting and Grinding Oil

    TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilizes a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.

  • Very highly refined base oil ensures low mist and high flash point
  • Good flushing properties keeps grinding wheels very clean
  • Excellent lubricity and EP properties ensures long wheel life and good surface finish
  • Excellent heat transferring properties
  • Excellent oxidation stability
  • Highly filterable in pre-coat filter systems
  • Low foaming
  • No reaction with cobalt
  • Kind to machine components and elastomers
  • Light color and low odor for good operator acceptance

  • TRIM® OG225

    Heavy Duty Cutting and Grinding Oil

    TRIM OG225 is a medium to heavy-duty straight oil designed for use in grinding operations of hardened steel alloys, tool steels, stainless steels, inconels and titanium. A carefully selected extreme pressure/anti-wear package together with great detergency ensures TRIM OG225 provides very high stock removal rates in flute grinding without burning. It is also formulated to comply with aerospace regulations, i.e. no chlorine and no active sulphur additives. TRIM OG225 can also be used to machine all materials, including yellow metals, in high pressure applications where low oil mist is advantageous.

  • Excellent extreme-pressure/anti-wear additive package for efficient metal removal
  • Excellent filterability in precoat filter systems
  • Hydrocracked base oil ensures very low misting potential
  • Very High flash point
  • Low foaming
  • Excellent oxidation stability
  • Excellent compatibility with copper containing alloys
  • Light color and low odor for good operator acceptance

  • TRIM® OM 100

    Nonchlorinated Cutting Oil

    TRIM OM 100 is a straight cutting oil designed for general machining of all metals including aluminum, copper, brass, and cast iron. OM 100 provides excellent lubricity without staining nonferrous metals.

  • Excellent lubricity for efficient metal removal
  • Residues are very easily removed with a Master STAGES™ clean aqueous cleaner such as Master STAGES™ CLEAN 2029 "One Step"
  • Will not stain
  • No active sulfur or chlorine

  • TRIM® OM 287

    Versatile Cutting Oil

    TRIM OM 287 is a straight cutting oil designed for general machining of all metals. OM 287 has a balanced, extreme-pressure package for excellent finishes and tool life on a variety of metals.

  • Excellent lubricity for efficient metal removal
  • Light color and low odor for good operator acceptance
  • Will not stain; runs clear
  • High-quality raw materials resist oxidation
  • Lower viscosity allows better cooling
  • Safe for use on nonferrous as well as ferrous metals

  • TRIM® OM 303

    Nonchlorinated Cutting and Lubricating Oil

    TRIM OM 303 is a highly formulated straight oil designed for use in conventional and Swiss style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. OM 303 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. This product is excellent for high-pressure applications such as thread rolling and thread-form tapping. OM 303 has proven itself in difficult operations on stainless and bearing steels. OM 303 provides lubrication properties similar to ISO 32 general-purpose lube oils.

  • Very light colored and clean running
  • Low foaming and low misting for use in aggressive operations
  • Oxidation inhibited for longer life, and an excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Has replaced dark, active sulfur/chlorine straight oils in several large operations while providing superior results in tool life
  • An outstanding product in thread rolling, thread form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur; therefore, does not stain parts

  • TRIM® OM 313

    Low V.O.C., Nonchlorinated, Cutting and Lubricating Oil

    TRIM OM 313 is a chlorine-free straight oil for use in conventional and Swiss-style screw machines, high-speed turning centers, and high-performance, multi-station machines, such as Hydromats. Excellent for high-pressure applications such as thread rolling and thread-form tapping. Proven on stainless and bearing steels. Low V.O.C. levels meet SCAQMD Rule 1144 for cleaner air. Safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. Provides lubrication properties similar to ISO 32 general-purpose lube oils.

  • Excellent chlorine-free lubricity package for difficult applications and materials
  • Low V.O.C. levels that meet SCAQMD Rule 1144 for cleaner air
  • Provides machine lubrication properties similar to ISO 32 general-purpose lube oils
  • Light colored, clean running
  • Can replace dark, heavy-active sulfur/chlorine straight oils while providing superior results in tool life
  • Low-foaming and low-misting for use in aggressive operations
  • Oxidation inhibited for longer life
  • Excellent choice where both ferrous and aluminum or copper alloy parts are being machined aggressively
  • Far easier to wash off parts than many oils of similar or even lower performance
  • Great for thread rolling, thread-form tapping, and in Swiss screw machines with solid bushings
  • Contains no active sulfur, therefore, does not stain parts

  • TRIM® OM 350

    Straight Oil

    TRIM OM 350 is a heavy-duty straight oil designed for general machining operations on both ferrous and nonferrous alloys.

  • Nonstaining
  • Light color
  • Low odor
  • Very high lubricity for different operations such as gear shaping

  • TRIM® OM 80

    Metalworking Fluid




    TRIM® OOA

    Metalworking Fluid Additive




    TRIM® OS 2267

    Straight Oil

    TRIM OS 2267 is a water reducible, water washable synthetic oil designed for the most difficult operations such as CBN grinding and deep drawing of tough alloys, as well as conventional machining of very tough materials. TRIM OS 2267 is used without dilution, or it can be combined with up to 50% water to reduce viscosity and increase cooling.

  • Water washable
  • Very high lubricity reduces heat from grinding and machining operations
  • Very high thermal conductivity for maximum cooling
  • Less smoke than regular oil products
  • Contains extreme pressure additives for the most difficult and demanding operations
  • Reduces misting
  • High flash point

  • TRIM® OSA

    High-lubricity, Clear Sulfur Oil Additive

    TRIM OSA is a clear oil additive containing inactive sulfur. OSA has outstanding lubricity in all circumstances and provides extreme pressure anti-weld at high speeds and loads.

  • Use as an additive to straight grinding oils, will reduce heat, misting, and allow increased feed rates in creepfeed applications
  • Extend the life of thread-forming taps and thread-rolling dies
  • Use in Swiss-type screw machines using solid carbide bushings to dramatically increase bushing life
  • Compatible with all TRIM straight oils and TRIM TAP LIGHT, TRIM TAP HEAVY, and TRIM TAP NC

  • TRIM® OSFA

    Lubricity Additive for Straight Cutting Oils

    TRIM OSFA is an additive package used to replace or increase the level of fats and sulfur in cutting and grinding oils. Typically it is added to improve sliding friction and improve mechanical lubricity, though it may help to control BUE in some situations.


    TRIM® OV 2200

    Premium Vegetable-based Oil

    TRIM OV 2200 is a bio-based straight oil for machining difficult alloys and stainless steels. The formula utilizes a proprietary blend of renewable resources to eliminate the need for traditional additives such as chlorine, sulfur, and animal fats. Allows users to improve their environmental profile by replacing products that contain V.O.C.

  • Environmentally friendly product which is free of V.O.C., chlorine, and animal fats
  • Delivers productivity improvements versus traditional mineral oils
  • Improves shop environment by reducing unpleasant odors and residues
  • Light colored, clean running
  • Versatile formulation developed to machine difficult alloys and stainless steels
  • Protects sensitive aluminum and copper alloys
  • Improves oxidative stability over previous generations of vegetable oils
  • Meets medical industry restrictions

  • TRIM® RDO 297A

    Straight Oil

    TRIM RDO 297A is a straight cutting oil designed for general machining of all metals. TRIM RDO 297A has a balanced extreme-pressure package for excellent finishes and tool life on a variety of metals.

  • Excellent lubricity for efficient metal removal
  • Light color and low odor for good operator acceptance
  • Will not stain
  • High quality raw materials resist oxidation
  • Lower viscosity allows better cooling
  • Safe for use on nonferrous as well as ferrous metals

  • TRIM® REGULAR

    Synthetic

    TRIM REGULAR is a chemical surface active or synthetic coolant concentrate designed for general machining and grinding of ferrous materials. It is particularly well suited for machining cast iron, but is an exceptional grinding and high velocity turning and milling fluid. REGULAR contains no sulfur, chlorine, or phosphorus, and meets the requirements of even the most restrictive chemical specifications.

  • Provides rapid and effective cooling
  • Keeps grinding wheels clean and free of loading
  • Has significant levels of specialized wetting agents for boundary lubrications even at very high SFPM
  • Has superior anti-weld action to control built-up edge and chip welding
  • Compatible with ferrous and nonferrous metals as well as most nonmetallic materials
  • Is exceptionally clean and oil free to promote a clean, safe work environment
  • Will keep your machines clean while leaving a soft, fluid film that protects the bare metal parts of your machine tools

  • TRIM® SC100

    Cutting and Grinding Fluid Concentrate




    TRIM® SC100BD

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® SC120

    Cutting and Grinding Fluid Concentrate

    A low oil, semisynthetic coolant concentrate. It is designed for light to moderate-duty machining and grinding of most materials. It is an exceptionally clean fluid which provides superior cooling, lubricity and rust inhibition for grinding cast irons and mild steels. This product does particularly well in centerless and cylindrical grinding applications.


    TRIM® SC120 bd

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® SC125AX

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® SC200

    General-purpose Semisynthetic

    TRIM SC200 is a semisynthetic, general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operations shop. SC200 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in “stand-alone” machines
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as most plastics and composites
  • Low odor and mist
  • Low-to-moderate foam with normal “flood” coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® SC200ND

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® SC210

    Nonchlorinated Semisynthetic

    TRIM SC210 is a semisynthetic, general-purpose cutting and grinding fluid concentrate for the multi-material, multi-operations shop. SC210 has the wetting and cooling characteristics of a premium heavy duty synthetic for superior turning, milling and "plain" grinding results. It also has sufficient oil for most "down-the-hole operations" on machining centers. This product complies with most stringent health, safety, and environmental mandates

  • Good performance characteristics on both steel and cast iron
  • Sufficient lubricity for drilling, tapping, and reaming in most common ferrous and nonferrous materials
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys as well as plastics and composites
  • Low odor and mist
  • Low to moderate foam with normal “flood” coolant application
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations
  • Provides good corrosion inhibition on all ferrous and nonferrous metals
  • Easily recycled or disposed of using conventional techniques and equipment
  • No chlorine or sulfur “EP” additives

  • TRIM® SC210BD





    TRIM® SC230

    Oil-rejecting Semisynthetic

    TRIM SC230 is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230 nd

    Oil-rejecting Semisynthetic - No Dye

    TRIM SC230 nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230CG

    Oil-rejecting Semisynthetic

    TRIM SC230CG is a low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC230CG nd

    Oil-rejecting Semisynthetic - No Dye

    TRIM SC230CG nd is a no dye, low oil, semisynthetic fluid which meets the needs of the modern and demanding job shops. SC230 makes use of the latest in synthetic coolant formulations, and a specially synthesized oil to produce a versatile product ready to meet the demands of the 21st century. This combination of a proprietary chemical formulation and new synthetic oil technology results in a semisynthetic product that will not foam, rejects tramp oil, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials
  • Has the lubricity to do form grinding, drilling, tapping, and reaming operations without the use of chlorine or sulfur-based EP additives
  • Will not foam, even at very high pressures and flow rates
  • Has good flushing action so that chips and fines are readily flushed into the machine's chip removal system
  • Very low carryoff to reduce the need for makeup coolant for low, long term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM® SC235

    Semisynthetic

    TRIM SC235 is a low oil, semisynthetic coolant that meets the needs of the most modern and demanding manufacturers. SC235 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that rejects tramp oil, has great sump life and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.

  • Compatible with a very wide range of materials including cast iron, steels, copper alloys, plastics, and composites
  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools — this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, tapping, and reaming operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

  • TRIM® SC235 bd

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® SC285

    Cutting and Grinding Fluid Concentrate

    TRIM SC285 is a low foam semisynthetic coolant based on Master Fluid Solutions' exclusive S3 synthetic oil technology. TRIM SC285 approaches the "down-the-hole" performance of premium soluble oils, and is exceptionally good on wrought aluminum alloys. Even with its very high performance, TRIM SC285 meets or exceeds most environmental standards.

  • Performs many drilling, tapping, reaming, and form-grinding operations without any chlorine or sulfur-based EP additives
  • Outstanding in high velocity turning and milling operations' the faster the tools move the better the product performs
  • Works well in mixed metal situations including aluminum, steel alloy, cast iron, and copper alloy
  • Provides good corrosion inhibition on all common ferrous and nonferrous alloys
  • Keeps grinding wheels clean and sharp for higher "G ratios", better surface integrity, and faster stock removal
  • Contains no DEA, nitrites, phenolic compounds, "formaldehyde releasers", or chlorine
  • Operators like TRIM SC285's very low odor, low foam, low mist, and clear blue working solution
  • Keeps your machines clean while leaving a soft, synthetic oil film that protects the bare metal parts
  • Machines are easily washed off with coolant working solution
  • Exceptional sump life, great resistance to fungus and bacteria, and good tramp oil rejection

  • TRIM® SC300

    Semisynthetic Cutting and Grinding Fluid Concentrate

    TRIM SC300 is a semichemical or semisynthetic cutting and grinding fluid concentrate. It is a general-purpose product for the multi-material, multi-operations shop using a proven EP additive package to control built-up edge (BUE) and improved tool life. TRIM SC300 has the wetting and cooling characteristics necessary for superior machining results on high speed milling and turning oppressions as well as down-the-hole operations like drilling, reaming, and tapping in steels and stainless steels.

  • Utilizes both chlorinated and sulfurized EP additives to control BUE in a wide range of operations
  • Can be effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Will provide sufficient lubricity to do down-the-hole operations in aluminum, cast iron and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper and aluminum alloys, as well as plastics and composites
  • Low odor and mist
  • Provides good corrosion inhibition on all ferrous and nonferrous metals
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® SC520

    General-purpose Semisynthetic

    TRIM SC520 is a low-odor, value-priced semisynthetic. SC520 is a general-purpose, cutting and grinding fluid concentrate for the multi-material, multi-operational shop. SC520 uses a proven EP-additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics necessary for superior machining results on high-speed milling and turning operations. It also controls chip welding on soft, gummy materials like aluminum.

  • Good sump life in "stand-alone" machines
  • Low odor and mist
  • Effective in most grinding, sawing, drilling, and CNC turning and milling operations by varying concentrations
  • Provides sufficient lubricity to do down-the-hole operations in aluminum, cast iron, and most steels, including many stainless steels
  • Compatible with a very wide range of materials including cast iron, steels, copper, and aluminum alloys, as well as, most plastics and composites
  • Low-to-moderate foam with normal "flood" coolant application
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® SC536

    Low-oil Semisynthetic

    TRIM SC536 is a low-oil, semisynthetic coolant that delivers significant performance improvements over previous generations of metalworking fluids. SC536 is a proprietary formula of specially synthesized oil and synthetic technologies blended to deliver unbeatable performance in a variety of machining and grinding operations. This innovative blend keeps machines clean and provides the longest sump life available.

  • Very low foam and mist
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
  • Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations without the need for chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operating costs
  • Exceptional sump life and very good tramp oil rejection
  • Very low initial odor level which usually disappears after one-to-two days
  • Minimizes the buildup of sticky residues

  • TRIM® SC610

    High-lubricity Semisynthetic Coolant

    TRIM SC610 is a high-lubricity, semisynthetic coolant built with Master Chemical's vegetable derived and chlorinated ester lubricants. It is very clean running with high levels of mechanical and chemical lubricity, and it contains no mineral oil. SC610 is optimized for turning and machining centers performing high velocity operations and/or low-speed, high-torque, down-the-hole operations. SC610 excels on high strength steel and super alloys and also on wrought and cast aluminums.

  • Based on our exclusive ester lubricant technology — contains no mineral (petroleum) oil
  • Low-foaming in most operations
  • Performs like a heavy-duty soluble oil in down-the-hole operations on machining and turning centers
  • Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
  • Will provide superior sump life and corrosion inhibition for long periods of time without adds
  • Very clean running for clean machines, parts, and work environment
  • Contains no nitrites, sulfonates, or phenols and is not SARA 313 reportable
  • With very low carryoff and long sump life, SC610 delivers low operating costs
  • Hard water tolerant up to 30 grains

  • TRIM® SC620

    Premium Low-oil Semisynthetic

    TRIM SC620 is a high-lubricity, low-foam, low-odor, semisynthetic cutting and grinding fluid concentrate for high performance machining and grinding environments. SC620 uses a proprietary blend of mineral oil, EP-additives, and lubricity agents to control built-up edge, improve tool life, and deliver the finishes historically achieved using soluble oils. This unique balance of lubricity, wetting, and cooling characteristics is engineered to improve semisynthetic performance on stainless steel, aluminum alloys, and other high-end materials.

  • Excellent sump life
  • Eliminates foam problems associated with most semisynthetics
  • Low oil content for reduced carry-off and lower residue
  • Versatile enough to maximize performance in most grinding, sawing, drilling, turning, and milling operations by simply varying concentrations with operation severity
  • Provides excellent lubricity to do tapping and other "down-the-hole" operations in aluminum, and most steels, including many stainless steels
  • Rejects tramp oils rapidly for easy recycling with good sump life
  • Easily recycled or disposed of using conventional techniques and equipment

  • TRIM® SC880

    Clean-running Semisynthetic

    TRIM SC880 is a low oil, semisynthetic coolant concentrate. It is designed for light to moderate-duty machining and grinding of most materials. It is an exceptionally clean fluid which provides superior cooling, lubricity and corrosion inhibition for grinding cast irons and mild steels. This product does particularly well in centerless and cylindrical grinding applications.

  • Compatible with a very wide range of materials including ferrous, nonferrous and nonmetallic material
  • Maintains pH and reserve alkalinity for long periods of time without adds for superior sump life and corrosion inhibition
  • Good corrosion inhibition on cast iron chips to prevent chip “clinkering” and “hot” chip hoppers
  • Contains no chlorine, sulfur or phosphorus based EP (extreme pressure) additives
  • Contains no nitrites, phenols or formaldehyde releasing compounds
  • Has very low carryoff to reduce the need for makeup coolant for low, long-term operating costs
  • Easily recycled to reduce coolant purchase and disposal costs

  • TRIM SOL®

    General-purpose Emulsion

    TRIM SOL is a soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® LC

    Chemical Emulsion Concentrate

    TRIM SOL LC is a chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

  • For wide range job applications from tough assignments such as gear hobbing and broaching to lighter duties like turning, TRIM SOL® LC has proven equally effective
  • Does not contain any chlorinated EP additives
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Housekeeping is easy with TRIM SOL® LC�s built-in cleaning action - metal chips and dirt will not build up; therefore, machines stay clean
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® LC nd

    Chemical Emulsion Concentrate

    Same as TRIM SOL LC but without the dye.


    TRIM SOL® LC ndsf

    Chemical Emulsion Concentrate

    Same as TRIM SOL LC but without dye and siloxane-free.


    TRIM SOL® LC sf

    General-purpose Emulsion, Nonchlorinated, Siloxane Free

    TRIM SOL LC sf is a siloxane-free chemical emulsion or soluble oil coolant concentrate designed for light and moderate machining and grinding. This product is designed for a wide variety of metal removal operations on most ferrous metals and many nonferrous metals, such as brass, copper, and aluminum. This product is particularly effective in situations where reactive alloying agents like lead (Pb) are present.

  • For wide range job applications (from tough assignments such as gear hobbing and broaching to lighter duties like turning) TRIM SOL LC sf has proven equally effective
  • Easily adaptable to nonferrous and ferrous metals
  • Stability - TRIM SOL LC sf forms an extremely tight emulsion of fine particle size and can be run for extended periods without pumpouts
  • Machine stays clean with TRIM SOL LC sf's built-in cleaning action - metal chips and dirt will not build up
  • Fluid residue prohibits sticky ways and slides which is a very important consideration in the operation of automatic and numerically controlled machines
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® nd

    General-purpose Emulsion - No Dye

    TRIM SOL nd is a no dye soluble oil (emulsion) coolant concentrate which is the world standard general-purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® ndsf

    General-purpose Emulsion - No Dye, Siloxane Free

    TRIM SOL ndsf is a no dye, siloxane free soluble oil (emulsion) coolant concentrate, which is the world standard, general-purpose, multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM SOL® sf

    General-purpose Emulsion - Siloxane Free

    TRIM SOL sf is a siloxane-free, soluble-oil (emulsion) coolant concentrate which is the world standard general-purpose, multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary for high-speed turning and grinding operations.

  • Proven to be highly effective in controlling built-up edge (BUE)
  • Has a very wide application range and is often used in such diverse operations as production surface and centerless grinding, heavy-duty broaching, gear hobbing, and replacing straight oil on some types of screw machines
  • Leaves a fluid, nongumming film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TRIM® TAP HEAVY

    High-lubricity Tapping Fluid

    TRIM TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. Designed as a tough operation product for use with metals of low machinability, it's recommended for use at full-strength, brush-on use for reaming, tapping, and threading.

  • Especially for taps ½" diameter and larger
  • Contains no mineral oils
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP LIGHT

    Tapping Fluid

    TRIM TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.

  • Especially for taps ¼" diameter and smaller
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP MEDIUM

    Synthetic Tapping Compound

    TRIM TAP MEDIUM is a moderated viscosity friction reducing synthetic tapping compound. It is particularly well suited to situations where it is desirable to have one fluid for both small and large diameter taps.

  • Easily washed off
  • Contains no petroleum oil
  • Can be pumped where a flow of tapping compound is desired

  • TRIM® TAP NC

    Nonchlorinated Tapping Fluid

    TRIM TAP NC is a blend of synthetic and vegetable-based lubricants and additives with strong friction reducing properties. Use for metals with low machinability at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting, shaving, gundrilling, and reaming.

  • Especially for taps up to 1" diameter
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs

  • TRIM® TAP NC HEAVY

    Tapping Compound

    TRIM TAP NC HEAVY is a blend of synthetic and vegetable-based lubricants and additives possessing strong friction reducing properties. It is designed as a tough operation product for use with metals of low machinability. It is recommended for use at full strength for brush-on applications required in reaming, tapping, and threading.

  • Contains no chlorine, sulfur, or phenols
  • Promotes excellent finish
  • Assists in parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Formulated to be water washable to facilitate removal of residue from machine parts
  • Compatible with most TRIM cutting and grinding fluids when applied for added lubricity on extremely tough jobs
  • Recommended especially for use on taps 1/2 inch diameter and larger

  • TRIM® TC 101

    Metalworking Fluid Additive




    TRIM® TC 103

    pH Adjuster Corrosion Inhibitor

    TRIM TC 103 is a primary amine based additive for controlling the pH of metalworking fluids. It is intended primarily for use in central systems as part of a comprehensive coolant management program.


    TRIM® TC 136

    Viscosity Reducer/Thinner




    TRIM® TC 143

    Phenolic Stabilizer

    TRIM TC 143 is a mixture of emulsifiers and an emulsion stabilizer which, when added to chemical emulsion type products, will help enhance emulsion stability.

  • Emulsion stability
  • Maximize performance

  • TRIM&® TC 150

    Silicone Antifoam/Defoamer

    TRIM™ TC 150 is a dimethylpolysiloxane (silicone) antifoam. It is used as a tank side add to control foam in water miscible coolants, washing compounds, floor soaps, etc.


    TRIM® TC 155

    Nonferrous Corrosion Inhibitor

    TRIM TC 155 is a nonferrous corrosion inhibitor for use in water soluble and straight oil systems. It is particularly effective in preventing staining and white rust on die cast alloys containing copper.

  • Prevents staining and white rust on die cast alloys containing copper
  • Nonferrous corrosion inhibition

  • TRIM® TC 156

    Green Dye




    TRIM® TC 175

    Chlorinated Lubricity Additive

    TRIM TC 175 is a chlorinated EP (extreme pressure) lubrication/emulsifier additive package. It may be added to water-soluble coolant systems to replace or increase the presence of the chlorine EP additives in the system.

  • New, easier to mix formulation
  • New, chlorine EP additives stay in systems longer

  • TRIM® TC 177

    Odor Mask

    TRIM TC 177 is a "vanilla" odor mask. This product may be used to reduce some of the odors associated with coolant systems.

  • "Vanilla" odor mask

  • TRIM® TC 184B

    Nonsilicone Antifoam

    TRIM TC 184B is a nonsilicone antifoam or defoamer. It is used as a tank-side add to control foam in water-miscible coolants, washing compounds, floor soaps, etc.

  • Antifoam
  • Nonsilicone

  • TRIM® TC 193

    Lubricity Additive

    TRIM TC 193 is a nonchlorine, nonsulfur EP (extreme pressure) additive package for use in water soluble coolant systems. It is used to reduce or control built-up edge (BUE) and control chip welding in some situations where other EP additives may not be appropriate (Cl and/or S).


    TRIM® TC 196

    Metalworking Fluid Additive




    TRIM® TC 197

    Metalworking Fluid Additive




    TRIM® TC 197T

    Emulsion Stabilizer and Odor Control Additive

    An easy to use tablet form of copper citrate that contains pH buffers and emulsifiers to help maintain pH and emulsion stability.


    TRIM® TC 200

    Emulsion Stabilizer

    TRIM TC 200 is a copper amine additive developed to improve emulsion stability in used metalworking fluids.


    TRIM® TC 201

    pH Adjuster Corrosion Inhibitor




    TRIM® TC 202

    Antifoam/Defoamer




    TRIM® TC 203

    pH Adjuster/Emulsion Stabilizer

    TRIM TC 203 is a copper amine additive developed to increase emulsion stability by raising pH.


    TRIM® TC 204

    Blue Dye

    TRIM TC 204 is a water-soluble blue dye. The product is used tank side to replenish depleted dye in water-soluble products or to color undyed products.

  • Blue dye
  • Water soluble

  • TRIM® TC 205

    Lubricity Additive

    TRIM™ TC 205 is a sulfur EP (extreme pressure) additive for water-soluble cutting and grinding fluids. It is intended to help improve the antiweld character of fluids in some situations.


    TRIM® TC 207

    pH Adjuster Corrosion Inhibitor




    TRIM® TC 208

    Biomass Dispersant

    TRIM TC 208 is a biomass dispersant. It is intended to assist in cleaning systems that have been fouled by excessive bacterial or fungal growth.


    TRIM® TC 209

    Antifoam/Defoamer




    TRIM® TC 211

    pH Adjuster/Emulsion Stabilizer

    TRIM TC 211 is an amine-based pH adjuster used to replenish depleted alkalinity in metalworking fluid working solutions. It is especially effective in central systems and batch recycling systems.

  • pH adjustment
  • Emulsion stabilization
  • Central systems
  • Replenish depleted alkalinity

  • TRIM® TC 212

    Nonsilicone Antifoam

    TRIM TC 212 is a true antifoam that prevents the formation of foam rather than breaking the foam bubbles after they have formed. It works by a combination of materials that become a part of the systems working solution to prevent the formation of foam.


    TRIM® TC 214

    Paintable Antifoam/Defoamer

    TRIM TC 214 is a nonsilicone, paintable, platable antifoam or defoamer. TRIM TC 214 uses special siloxane molecules to make this product readily washable and paint friendly. While TRIM TC 214 will test positive for silicon (Si) using an ICP or similar technology, it is free of dimethylpolysiloxane (silicone). TRIM TC 214 is a tank side add used in the control of foam in coolant, parts washing systems, floor soaps, etc.


    TRIM® TC 216

    Odor Mask

    TRIM TC 216 is a water soluble lemon-lime odor mask. This product may be used to reduce some of the odors associated with water soluble coolants and washing systems.


    TRIM® TC 217

    Odor Mask

    TRIM TC 217 is a water soluble odor mask. This product may be used to reduce some of the odors associated with water soluble coolant systems.


    TRIM® TC 218

    Odor Mask




    TRIM® TC 219

    Non-Silicone Antifoam

    TRIM TC 219 is an antifoam that prevents the formation of foam rather than breaking the foam bubbles after they have formed. It works by using a combination of materials that become a part of the system�s working solution and suppress the formation of foam. This product is an upgrade to and is compatible with TRIM TC 212.


    TRIM® TC 220

    pH Adjuster

    TRIM TC 220 is a triazine compound that is very effective in maintaining pH and building reserve alkalinity in metalworking fluid working solutions. Controlling pH within the design range of the product and maintaining an appropriate level of reserve alkalinity are key elements in extending sump life, controlling both liquid and vapor phase corrosion, and emulsion stability of soluble oils.

  • pH adjustment
  • Building reserve alkalinity
  • Extending sump life
  • Controlling both liquid and vapor phase corrosion

  • TRIM® TC 226

    Antifoam

    TRIM TC 226 is an antifoam that prevents the formation of foam rather than breaking the foam bubbles after they have formed. It works by using a combination of raw materials to alter fluid surface tension, thus preventing the formation of foam in metalworking fluid working solutions.


    TRIM® TC 227

    Lubricity Additive

    TRIM TC 227 is a mixture of lubricity additives. It is designed to increase the hydrodynamic lubrication of water-miscible cutting and grinding fluids. It is particularly effective in increasing tool life and reducing the forces generated in drilling, tapping, and reaming operations in soft, gummy materials. TC 227 has also been effective as an add to chemical coolants used for roll-form tapping in wrought and extruded aluminum alloys.


    TRIM® TC 228

    Recycling Additive

    TRIM TC 228 is a mixture of chemicals to replace the materials that are preferentially depleted in some chemical (synthetic) and semichemical (semisynthetic) products. Some of these products have such low carry off that normal makeup will not replace all the materials which are depleted over long periods of use. When TRIM TC 228 is used as part of a comprehensive recycling or coolant management program, it will replace and/or enhance both the ferrous and nonferrous corrosion inhibition of coolant working solutions.


    TRIM® TC 230

    Recycling Additive

    TRIM TC 230 is a mixture of emulsifiers, emulsion stabilizers, alkalinity boosters, and odor control agents that, when added to chemical emulsion or soluble oil-type products, facilitates recycling and, when used as part of a comprehensive coolant management program, helps to extend sump life.


    TRIM® TC 231

    Cleanliness Additive

    TRIM TC 231 will prevent or reduce the formation of carbon (graphite) smut and hard-water soaps often found when machining some cast irons with synthetic coolants. TC 231 is a unique blend of wetting agents and surfactants that help keep the machine, tools, and work piece clean for a safer, more pleasant work environment.

  • TC 231 is intended for use in TRIM synthetic cutting and grinding fluids
  • TC 231 is typically added at rates between 0.01%-0.1% (100 PPM-1,000 PPM). Actual add rates are best established through on-site testing
  • TC 231 may increase the tendency of the working solution to foam
  • TC 231 will be depleted with normal coolant carryoff so periodic additions with the normal coolant makeup will be necessary to insure consistent performance
  • TC 231 may increase refractive index reading

  • TRIM® TC 232

    Chlorinated Lubricity Additive




    TRIM® TC 233

    Lubricity Additive

    TRIM TC 233 is a dual-purpose additive which is used in synthetic (e.g., TRIM C270, C276, etc.) and some semisynthetic (e.g., TRIM SC230, SC520, etc.) coolants. It can increase lubricity for operations such as drilling or tapping. At fluid temperatures above 95°F (35°C), it will act as an anti-foam.

  • Increase lubricity
  • Reduce foam
  • Reduce friction

  • TRIM® TC 234

    Recycling Additive

    TRIM TC 234 is a mixture of chemicals to replace the materials that may be preferentially depleted in some (cationic) synthetic and semisynthetic products. Some of these products have such low carryoff that normal make-up will not replace all of the materials which are depleted over long periods of use. When TC 234 is used as part of a comprehensive recycling or coolant management program, it will replace and/or enhance both the ferrous and nonferrous corrosion inhibition systems of coolant working solutions.

  • Replenish coolants
  • Enhance corrosion inhibition

  • TRIM® TC 235

    EP Additive Package

    TRIM TC 235 is a water soluble, chlorinated EP additive package for the control of the built-up edge (BUE) in certain machining situations. It is particularly useful in the high-speed turning and milling of wrought and cast aluminum and some stainless steels. TRIM TC 235 provides chemical lubricity to help control chip welding, but will not reduce the apparent sliding friction seen in some machining operations.


    TRIM® TC 236

    pH Adjuster

    TRIM TC 236 is an amine-based pH adjuster for use in central systems and batch recycling systems to replenish depleted alkalinity in metalworking fluid working solutions.


    TRIM® TC 238

    Lubricity Additive




    TRIM® TC 239

    Paintable Antifoam/Defoamer

    TRIM TC 239 is a paintable, plateable additive used to control foam in metalworking fluids and parts washing systems.

  • Paintable
  • Plateable

  • TRIM® TC 240

    Recycling Additive

    TRIM TC 240 is a mixture of emulsifiers and PCMC (parachlorometacresol), a phenolic compound that helps improve and maintain emulsions. When added to a soluble oil or semisynthetic working solution, it will help reduce system odor, improve filtration, reduce carryoff, and increase wetting.

  • TRIM TC 240 is intended primarily for use in central systems
  • TRIM TC 240 can replenish and/or increase the PCMC stabilizer found in some TRIM products
  • The safe and effective range for PCMC is 1500 to 3000 ppm in the working solution
  • To increase PCMC by 1000 ppm, add TRIM TC 240 at 0.28% by volume to the working solution
  • Adding TRIM TC 240 may cause a slight increase in foam
  • When added to a clear product, a slight haziness may occur
  • TRIM TC 240 will test positive for phenols on the 4-amino antipyrine test
  • Before adding TRIM TC 240 to a coolant system, laboratory bench tests are recommended to insure compatibility
  • TRIM TC 240 should be used only as part of a recycling system or central system management program, or by direction of the Master Fluid Solutions Laboratory or District Manager

  • TRIM® TC 242

    Ester Lubricity Additive

    TRIM TC 242 is an ester-based lubricity additive for metalworking fluids. TRIM TC 242 increases boundary lubrication. In some situations, it will also function as an EP (extreme pressure) additive.

  • TRIM TC 242 is very effective in low speed, high torque operations on soft gummy materials
  • TRIM TC 242 works primarily to reduce apparent friction and flank drag. The reduction in frictional force is directly related to add rates
  • Add rates of between 0.5 and 5% have been proven effective
  • In synthetic and semisynthetic coolants, the addition of TRIM TC 242 may change the color and opacity of the fluid
  • The addition of TRIM TC 242 will affect the refractive index for the working solution to which it is added. TRIM TC 242 does not affect titration values

  • TRIM® TC 244

    pH Adjuster/Emulsion Stabilizer

    TRIM TC 244 is an amine based pH adjuster for use in central systems and batch recycling systems to replenish depleted alkalinity in metalworking fluid working solutions.

  • Add rates in the 0.1% to 0.3% (1,000 to 3,000 PPM) range are typically effective in raising the pH of used metalworking fluid working solutions to the 10.0% to 10.7% range
  • Care should be taken when making adds to systems with a pH of less than 8.4 as ammonia blush may result
  • TC 244 does not contain MEA, DEA, TEA, Cu, or Boron

  • TRIM® TC 248

    pH Adjuster

    TRIM TC 248 is an amine-based pH adjuster used to replenish depleted alkalinity in metalworking fluid working solutions.

  • TC 248 is usually added at concentrations between 0.05% - 0.25% (50 – 2,500 ppm) to help maintain pH, improve corrosion inhibition, and improve emulsion stability. A 0.1% add of TRIM TC 248 will typically increase the pH of a 7.0 pH fluid to approximately 8.0 - 8.5
  • Overuse of this product may cause ammonia and/or amine blush; therefore, care should be taken not to exceed recommended add rates
  • As formulated, TC 248 does not contain MEA, DEA, TEA, Cu, or Boron

  • TRIM® TC 249

    Recycling Additive

    TRIM TC 249 is a synthetic recycling additive especially useful in TRIM SC410, TRIM SC610, or CoolPAK™ ALW systems with high-particulate loads.

  • Add rates start at 20 ounces per 1000 gallons and go up to 50 ounces per 1000 gallons

  • TRIM® TC 251

    Non-chlorinated Lubricity Additive

    TRIM TC 251 is a non-chlorinated lubricity additive. It is used as a tank-side additive to water-soluble and semisynthetic coolant systems to increase lubricity.

  • Non-chlorinated
  • Increases lubricity in water-soluble and semisynthetic coolant systems
  • New chlorine free EP additives stay in systems longer

  • TRIM® TC 252

    Water Conditioner and Defoamer

    TRIM TC 252 is a calcium acetate tank-side-add water conditioner used to aid in the control of foam. TC 252 replenishes the calcium when the calcium may have been stripped though reverse osmosis or deionization.

  • Water Conditioner
  • Defoamer
  • Calcium replenisher
  • Also conditions water that is naturally soft and low in calcium

  • TRIM® TC 253

    Straight Cutting Oil Defoamer

    TRIM TC 253 is a tank-side additive used to control foam in straight oil operations.

  • Straight oil defoamer

  • TRIM® VHP® C340

    High-Pressure High Volume Synthetic Coolant

    TRIM VHP C340 is a synthetic (chemical surface active) coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM VHP C340 is ideally suited to situations where high coolant velocities or volumes are necessary to get maximum productivity. This product is often used for machining and grinding exotics and highly alloyed steels.

  • Low to no foam even at fluid pressures approaching 200 BAR (3,000 PSI)
  • A water clear fluid that will keep machine windows clear and clean to provide optimum visibility
  • Leaves a fluid residual film to protect the machine, work pieces, and fixtures from corrosion
  • Provides superior hydrodynamic lubrication
  • Contains a proprietary, nonchlorinated, nonsulfurized EP additive package to control built-up edge
  • Coolant residue is easily removed with either water, working solution, or aqueous cleaners
  • Long, stable fluid life for easy recycling

  • TRIM® VHP® C340BD

    Water miscible cutting and grinding fluid concentrate




    TRIM® VHP® E200

    Chemical Emulsion Concentrate




    TRIM® VHP® E200PW

    Very High-pressure, Pratt & Whitney Approved Emulsion

    TRIM VHP E200PW is an emulsion (soluble oil) coolant that specializes in heavy-duty machining and creepfeed grinding of aircraft alloys. Pratt & Whitney has approved this product for use on all materials and it applies to both Pratt & Whitney facilities and authorized subcontractors. The Pratt & Whitney approval number is PMC 9390.

  • Pratt & Whitney (PMC 9390) approved for use in all grinding and machining operations on all metals
  • No foam at very high pressures and volumes
  • Contains a proven and highly effective, nonchlorinated, extreme-pressure additive to control built-up edge and wheel loading
  • Very high levels of boundary lubrication for superior tapping, reaming, and form grinding results
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Machines are easily washed off with coolant working solution to minimize the buildup of residues and chips
  • Easy recycling or disposal with conventional techniques and equipment
  • Runs effectively for long periods without the need for costly additives

  • TRIM® VHP® E210

    Very High-pressure, Chlorine-free Emulsion

    TRIM VHP E210 is a specialized, heavy-duty chemical-emulsion, soluble-oil, coolant concentrate. This product is a proven performer in heavy-duty machining, grinding and some stamping operations. It will even run in very high-pressure situations with little-to-no foam.

  • Is compatible with a very wide range of material including steels, stainless steels, and aluminum alloys
  • Low-to-no foam even in very high-pressure operations such as creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Has sufficient boundary lubrication to do roll-form threading in many materials
  • Superior anti-weld properties without chlorinated EP additives
  • Will keep machines very clean while leaving a soft, fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® VHP® E210S&C

    Water miscible cutting and grinding fluid concentrate




    TRIM® VHP® E232PW

    Water Miscible Cutting and Grinding Fluid Concentrate




    TRIM® VHP® E320

    Very High-pressure, High-lubricity Emulsion

    TRIM VHP E320 is a specialized heavy-duty chemical emulsion (or soluble oil) coolant concentrate. This product is a proven performer in heavy-duty machining, grinding, and some stamping operations. It is particularly effective in creepfeed grinding of steel and super alloys with either conventional or CBN wheels. It will run in very high-pressure situations with little- to no- foam.

  • Compatible with a very wide range of materials, but is particularly effective on high-strength steel and super alloys
  • Low-to-no foam even in very high-pressure operations like creepfeed grinding, Ejector® drilling, and gundrilling or gunreaming
  • Superior cleaning and EP lubrication characteristics to assist in fast, deep cuts with plated CBN wheels in high-production steel grinding and slotting operations
  • Very good anti-weld properties without the use of chlorinated EP additives
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced machine maintenance costs
  • Uses standard metalworking recycling and disposal techniques

  • TRIM® VHP® E810

    Cutting and Grinding Fluid Concentrate

    TRIM VHP E810 is a chlorine-free, environmentally friendly, very low foam, emulsion that is ideal for machining centers equipped with high-pressure, through-the-tool coolant delivery systems. It is also outstanding for centerless, cylindrical, and creep feed grinding of both ferrous and nonferrous metals. VHP E810 does not foam, and keeps the machine clean, while rapidly wetting the chips and tools to insure excellent tool life and good corrosion prevention.

  • A very versatile product that works well in a wide range of operations such as production, surface, and centerless grinding, milling, turning, drilling, and tapping
  • Proven performer in difficult creep feed grinding operations
  • Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
  • Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
  • Very low foam, without the use of conventional defoamers
  • Easily recycled or disposed of without special handling or equipment
  • Contains no DEA, DCHA, chlorine, nitrites, or phenolic compounds

  • TRIM® VX

    Extreme Lubricity Emulsion

    TRIM VX is a soluble oil (chemical emulsion) coolant designed to do the heaviest duty machining operations. VX is often used as a replacement for straight cutting and grinding oils. It contains very high levels of EP additives including stable chlorine and sulfur. Additional friction modifiers, including sulfurized fats and particle size modification technology, are used to reduce the mechanical friction seen in many heavy-duty machining and grinding operations.

  • Even with all these EP additives and friction modifiers, VX will not stain “white and yellow” metals
  • Cools better than straight oil to allow higher metal removal rates without heat damage
  • Contains a proven and highly effective extreme pressure (EP) additive to control built-up edge and prevent wheel loading and packing
  • Leaves a soft fluid film to prevent sticky ways, chucks, tool holders, and fixtures
  • Coolant residue is easily removed with water, working solution or aqueous cleaners
  • Easy recycling or disposal with conventional techniques and equipment

  • TROYSAN® POLYPHASE®





    TROYSAN® POLYPHASE® LA 33

    Fungicide


    TROYSAN® POLYPHASE® LA 33 is a broad spectrum biocide/fungicide registered for use in metalworking fluids. This product should be used in accordance with the label instructions only. Troysan® and Polyphase® are registered trademarks of the TROY Corporation.