Meet the challenges of compressor and HVAC&R equipment manufacturing with Master Fluid Solutions performance
The surge in demand for higher performance, technologically advanced, and more environmentally-friendly equipment has stimulated compressor and HVAC&R manufacturing. Perform ahead of the competition with hard-working Master Fluid Solutions.
Number of products in category is 10
TRIM® C118
Synthetic Metalworking Fluid
TRIM C118 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.
Does an excellent job in most glass, ceramic, and composite grinding applications
Excellent corrosion inhibition on most common ferrous and nonferrous alloys
Extremely low carryoff keeps operating costs down
Low foam and mist
Very low initial odor level which usually disappears after one to two days
Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
Exceptional sump life and very good tramp oil rejection
Interested In Testing Our Coolant? Here's How A Free Trial Works
TRIM® C270
High-performance Synthetic
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one-to-two days
Master Fluid Solutions, A World Leader in Aerospace-Approved Metalworking Fluids
TRIM® C270 bd
High-performance Synthetic - Blue Dye
TRIM C270 bd is a state-of-the-art synthetic coolant. C270 bd provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
C270 bd is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one-to-two days
TRIM® C270CG
High-performance Synthetic
TRIM C270CG is a state-of-the-art synthetic coolant. C270CG provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C270CG bd
High-performance Synthetic - Blue Dye
TRIM C270CG bd is a state-of-the-art synthetic coolant. C270CG bd provides excellent cooling and chip settling, good tramp oil rejection and machine cleanliness and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor which usually disappears after one to two days
TRIM® C276
Clean-running Synthetic
TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
Extremely low carryoff for very low total operation costs
Exceptional sump life and very good tramp oil rejection
Low initial charge odor which dissipates further after one or two days
Minimizes the buildup of sticky residues
TRIM® MicroSol® 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT
TRIM® MicroSol® 642RX
High-lubricity, Low-foam, Medical Grade Microemulsion
TRIM MicroSol 642RX is specifically formulated for the medical device industry. This product is low-foaming, has high-lubricity, a long sump life, is clean running, and is free of animal derived raw materials. MicroSol 642RX can be run with many operations on titanium, stainless steel, copper, aluminum alloys, and exotic alloys. This is the fluid of choice for medical instruments, ortho instruments, prosthetic devices, endoscopy, and surgical tools.
Conformance to EH&S requirements for the medical industry
Improved lubricity for longer tool life
Extended useful life without the need for tank-side biocides or fungicides
Halogen free formulation
Low foaming for today’s demanding high-pressure, high-volume applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Superior corrosion inhibition on all ferrous and nonferrous metals
High machine cleanliness while leaving a soft fluid film for ease of cleaning and reduced maintenance
Ease of disposal with no special disposal or recycling techniques or requirements
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Boron and halogen free
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Tools last longer cutting Inconel® with TRIM® MicroSol® 690XT
TRIM® MicroSol® 692XT
Premium, High-lubricity, Low-foam Microemulsion
TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!
Improved lubricity for longer tool life
Dramatically extends useful life without the need for tank-side biocides or fungicides
Halogen free
Low foaming for todays demanding high-pressure, high-volume applications
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Requires no special disposal or recycling techniques
