Fluid Products / Energy

This product has Rolls Royce Approval CSS 130

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, machine cleanliness and meets the needs of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping and reaming operations without chlorine or sulphur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimise the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• Low initial charge odour which dissipates further after one or two days

TRIM C274 is a high-performance synthetic fluid for working cast iron and steel alloys as well as corrosion resistant alloys such as inconel and titanium. TRIM C274 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C274 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes.

• Very stable formula provides long operational life with consistent performance
• Chlorine and sulphur free extreme pressure (EP) additives control built-up edge (BUE)
• Excellent choice for nickel alloy, steel alloy and cast iron machining and grinding
• Extremely low foam in mineral free water
• Excellent tramp oil rejection
• Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easy recycling or disposal with conventional techniques and equipment

TRIM E715 is a high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E715 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E730 is a boron-free, high quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the medium to high duty machining and grinding jobs. The stable and predictable performance of TRIM E730 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE)
• Extremely fine soluble oil emulsion reduces carryoff for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Suitable for machining aluminium alloys, steel alloys, nickel alloys, cast iron and yellow metals
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E806 is a truly unique metalworking fluid emulsion concentrate with unparalleled metal compatibility and all round machining performance characteristics. The product is primarily designed for machining magnesium alloys used in the aerospace, automotive and general industry sectors. TRIM E806 does not tarnish the most sensitive magnesium alloys even after relatively long exposure times plus it is impervious to magnesium salt build-up in the sump - something which splits normal emulsions in a matter of days. Another problem with magnesium machining, hydrogen gas evolution, is virtually nil with TRIM E806. The product also has the lubricity and extreme pressure performance to machine other alloys commonly seen in the aerospace industry such as wrought aluminiums, stainless steels, inconel^® and titanium.

• Safe for use on even the most sensitive magnesium alloys
• Little or no hydrogen gas evolution when machining magnesium
• Bio package extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications

TRIM E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

• Delivers exceptional lubricity
• Very long sump life and low carry-off rates result in low operating cost
• Low foam even in soft water areas
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E905 is a high quality, high lubricity universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. TRIM E905 has broad application in machining and grinding of a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of TRIM E905 makes it a first choice for high quality, consistent parts manufacturing.

• A very universal product that works well in a wide range of operations
• Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
• Extremely hard water tolerant
• Very low foam even at high pressures
• Extremely fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easily recycled or disposed of without special handling or equipment

TRIM E909 is a high quality, universal soluble oil with a broad application range in machining and grinding of a wide range of materials. Very high levels of extreme pressure additives in this product make it particularly suitable for the heavy duty machining jobs on stainless steel and other difficult to machine alloys. The inhibitor package in TRIM E909 also makes it particularly suited to the machining of copper alloys without component staining or unsightly machine residues.

• Very stable formula provides long operational life with consistent performance
• Hard water tolerant
• Traditional extreme pressure (EP) additives control built-up edge (BUE)
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• Will run effectively for long periods without the need for costly additives

TRIM E923 is a proprietary blend of new vegetable-based technology and very high levels of chlorine free extreme pressure (EP) additives to yield an extreme performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver unparalleled tool life in some of the most difficult metal cutting operations whilst still providing the excellent non-cutting characteristics normally associated with traditional, high quality emulsions from Master Fluid Solutions. The optimised lubricity and extreme pressure package matches heavy duty neat oils on difficult to machine materials such as inconel, titanium, stainless steel and high tensile strength steels.

• Delivers exceptional lubricity and EP performance
• Has the necessary performance to replace neat oils in certain applications
• Very long sump life
• Low foam even in soft water areas
• Hard water tolerant
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

• Delivers unparalleled lubricity
• Very long sump life and low carry-off rates result in low operating cost
• Low foam even in soft water areas
• Hard water tolerant
• Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
• Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
• Compatible with all materials excluding magnesium
• Easily recycled or disposed of without special handling or equipment
• Will run effectively for long periods without the need for costly additives

TRIM MicroSol 515 is a medium to high lubrication, semi-synthetic microemulsion coolant. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you would expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding cast iron it does very well in mixed metal situations and is a proven performer when machining aluminium, inconel and titanium alloys.

• Medium to high levels of lubrication without chlorinated or sulphurised EP additives
• Compatible with aluminium, all steels, yellow metals and cast iron
• Extremely hard water tolerant
• Alternative to emulsion products for machining of high silica aluminium alloys
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
• No aggressive biocides
• Easily recycled or disposed of without special handling or equipment
• Contains no DEA, chlorine, sulphur, nitrites, formaldehyde releasers or phenolic compounds

TRIM MicroSol 519 is a medium to high lubricity, semisynthetic, microemulsion coolant. The formula provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. Whilst it is particularly suited to machining and grinding cast iron and steel, it does very well in mixed metal situations and is a proven performer on aluminium alloys, stainless steels and titanium.

• Formaldehyde releaser and boron free
• Low foaming for modern high-pressure, high-volume applications
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Optimised combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding grey iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank side biocides or fungicides
• Formaldehyde free
• Low foaming for demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including steels, copper and aluminium alloys, and many plastics and composites
• Optimised combination of cooling and lubricity for titanium machining applications
• Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
• Contains no nitrites, phenols and chlorinated or sulfurised EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 636NXT is an innovative, translucent semisynthetic metalworking fluid free of mineral oil, boron, secondary amines and biocide. The product is low foaming even in soft waters but is also stable in waters with a high hardness. The product is ideal for use in turning and milling of structural steels, alloy steels, aluminium and yellow metals due to its well balanced lubrication and cooling characteristics. It can also be used for the machining and grinding of cast iron.

• Mineral oil, boron, secondary amine and biocide free
• Provides superior corrosion inhibition on all ferrous metals
• Uses standard metalworking recycling and disposal techniques
• Low foaming for modern high-pressure, high-volume applications
• Greatly extends useful life without the need for tank side biocides or fungicides
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance

TRIM MicroSol 651XT is a high-lubricity, low-foaming, multi-metal, semisynthetic microemulsion coolant. The formula offers the performance of a heavy-duty soluble oil with the cleanliness of a semisynthetic. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. An excellent alternative to soluble oils on high-silica aluminium alloys, MicroSol 651XT is compatible with a wide range of materials and operations.

• High lubricity for extended tool life
• Low foaming for today's high-pressure, high-volume coolant delivery systems
• Excellent sump life without the use of tank side additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Hard water stable
• Forms a tight microemulsion for low carryoff
• Compatible with a wide range of materials and operations
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminium alloys
• Contains no nitrites, triazines, phenols, chlorinated or sulfurised EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM OE105 is an ester based neat grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity whilst keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials

• Excellent extreme-pressure additive package for efficient metal removal
• Very high lubricity
• Great detergency
• Fully saturated ester ensures unsurpassed oxidation stability
• Ester based formulation ensures very low misting potential
• Very high flash point for such a low viscosity product
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE310 NS is a heavy-duty neat cutting oil formulated using renewable vegetable esters and is used in very tough machining operations of hardened steel alloys, tool steels and stainless steels. TRIM OE310 NS is especially effective in deep hole drilling applications due to its low viscosity, lubricity and EP performance.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Low viscosity ensures excellent chip removal in deep-hole drilling
• Ester based formulation ensures very low misting potential
• Very high flash point
• Good oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM OE330 NS is a very heavy-duty neat cutting oil formulated using renewable vegetable esters. TRIM OE330 NS is designed for use in very tough machining operations of hardened steel alloys, tool steels and corrosion-resistant steel alloys. TRIM OE330 NS is especially effective in slow-speed machining operations such as gear hobbing and broaching. The product can also be used to replace the dark, high-odour neat oils used in Sunnen honing machines.

• Excellent extreme-pressure additive package for efficient metal removal
• Extremely high lubricity ensures fantastic tool life
• Extremely low misting potential even with high pressure chip-breaker units
• Very High flash point
• Excellent oxidation stability
• Compatible with copper containing alloys
• Light colour and low odour for good operator acceptance

TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centres.

• A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling and tapping
• Extremely good product for cast iron, steel and stainless steel machining and grinding
• Low foam profile enables use in through-tool machining applications
• Very fine emulsion reduces carry-off for low total operating cost
• Fast wetting to get the fluid to the point of cut and fully coat the workpiece and chips for superior corrosion prevention
• Extremely hard water tolerant
• Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life

TRIM™ SOL SF is a very high lubricity soluble oil which is suitable for machining and grinding a broad range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining of difficult materials such as stainless steel, Inconel^® and titanium.

• A very universal product that works well in a wide range of operations
• Compatible with aluminium, all steels and yellow metals
• Tried and tested extreme pressure (EP) additive controls built-up edge in tough operations
• Hard water tolerant
• Fine soluble oil emulsion reduces carry-off for low total operating cost
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Siloxane free
• Easily recycled or disposed of without special handling or equipment

Master STAGES CLEAN 2020 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminium in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

Ingredients acc. to EU Detergent Regulation (RE (EC) No 648/2004)

• Excellent cleaning in immersion and ultrasonic tanks
• Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
• An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminium, and copper alloy parts
• Will provide extended in-process tarnish resistance on copper and copper alloy parts
• Safe on aluminium, aluminium alloy, and magnesium
• Will remove coolant residues as well as straight oils