High-performance, low-maintenance coalescer removes tramp oil while machine is running

Committed today for a greener tomorrow.

Master Coalescer Jr packs the punch to add up to BIG savings.

A low-cost, smaller yet effective, tramp oil separator: Master Coalescer Jr.™ Compact and affordable, Master Coalescer Jr processes machine tool coolants to remove tramp oils and fines and provide clean, reusable coolant – paying for itself with extended coolant and tool life, improved machinability, and reduced maintenance.

Extremely efficient, "Junior" offers:

• Compact design to work with CNC machines with small, hard-to-access coolant sumps
• Maximum tramp oil removal while machine is running
• Minimal maintenance
• Simplified operation; less operator involvement
• Portability allows shared use on several machine tool sumps

Features

• Up to 1 GPM flow rate, no adjustments to make
• Pre-pump strainer
• Electric 120 volt diaphragm pump – primes to 48"
• Easily removable media pack with 132 square feet of coalescing surface area
• Valve to easily drain and clean tank
• Internal adjustable tramp oil discharge valve
• Adjustable leveling pads
• New floating skimmer – only 3" diameter – works in sumps as shallow as 11/2" deep to collect oils and soiled fluid

Laboratory Precision in the Palm of Your Hand!

The new Palm Abbe is a fourth-generation digital handheld refractometer that puts laboratory precision in the palm of your hand. Not just laboratory precision, but laboratory precision for the price of a traditional analog refractometer. It is exactly the kind of bold, cutting-edge technology you would expect from MISCO, the company that pioneered the digital handheld refractometer.

The Palm Abbe refractometer is fast, convenient, and easy to use. Simply place a drop or two of fluid in the titanium well and press a button. The custom-designed microprocessor delivers a nearly instantaneous readout in degrees Brix. Nonlinear temperature compensation is automatic and insures that fluids read between 0°C and 50°C (32°F to 122°F) are measured accurately.

The large LCD display is easily read, even in dim light, and removes the subjectivity associated with interpreting where a boundary line crosses tiny scale divisions. And, it is so easy to use! The user interface consists of two buttons, one to take readings and the other to step through various menu options.

Calibration is automatic and does not require the use of special calibration solutions, or tools. The Palm Abbe refractometer automatically calibrates itself to water and is ready to use in seconds. No more screws to turn and nothing to adjust.

Effectively Remove Oil from Coolants and Washing Solutions

Tramp oil is a major source of problems associated with water miscible cutting and grinding fluids.

Tramp oil contributes to the growth and formation of:

• coolant-destroying bacteria
• undesirable residues on machine tools and workpieces
• smoke and oil mist in shop atmospheres

These problems result in:

• shortened coolant life
• poor material removal rates
• poor surface finish and size control
• decreased tool and wheel life

Numerous devices ("floating ropes," wheels, and belts) have been developed over the years to remove "free floating" tramp oil from the surface of coolant. While they have all worked to one degree or another, they generally have been either "troublesome," high maintenance, relatively ineffective, or able to operate only on limited liquid level fluctuations.

As a "belt-type" skimmer, these units are effective in removing floating oil from widely fluctuating liquid levels of coolants or parts washing solutions. The SCROUNGER features a revolutionary new oleophilic belt and a totally new concept of stripping the separated oil from the belt. The SCROUNGER Jr. uses the same "oil loving" belt, but uses a more compact scraper blade to strip the separated oil from the belt.

Features

• 115 volt, single phase, 50/60 Hz
• heavy-duty, impedence-protected, fan-cooled drive motor with hardened shaft and needle bearings (220 volt, single phase, 50 Hz also available)
• open, accessible oil-collecting tray with a convenient drain connector
• "oil loving" oleophilic belt (purchased separately)
• heavy-duty steel construction, with industrial-grade enamel paint

Benefits

• fast, simple belt changing
• low maintenance
• lower hang roller that will not fall off in the machine sump even in turbulent conditions

Options

• dewatering tray
• portable kit
• special length belts available on special order
• special belt materials available for high temperature or pH applications on special order

SCROUNGER Jr Belts

• all belts 1" [25mm] wide
• 24" [610mm]
• 32" [815mm]
• 44" [1120mm]

UNIMIX™ EMC is a high accuracy self-powered proportioning pump made specially for dispensing Master STAGES™ cleaning compounds. Special components resist even high pH powered cleaner formulations.

Benefits

• Concentration control
• Reduces concentrate waste
• Easy to install
• Reliable and consistent
• Nonelectrical
• Adjustable

Mixture Range

• UNIMIX EMC 1% to 6% (up to 12pH)

The Li'l Sucker™ is the newest addition to the Yellow Bellied Sump Sucker™ line of sump cleaning vacuums. Based on extensive customer research and extended field trial experience, customers were able to tell us what they liked, disliked, felt had no value, and would change in the previous designs. The result was the Yellow Bellied Sump Sucker that customers designed. It is durable, highly maneuverable, easy to use, and provides exceptional suction and discharge flow rates.

• Removes the coolant, sludge, and chips from the sump
• Filters the sludge and chips from the fluid
• Returns filtered coolant to the machine tool sump, or
• Transports the coolant to waste treatment for disposal, or to a XYBEX Recycling System for recycling

Features

• Tank capacity of 50 gallons (190 liters)
• Suction rate up to 85 GPM (320 LPM)
• Discharge rate up to 40 GPM (150 LPM)
• 1.6 ft³ (45 dm³) chip basket holding capacity, roughly 12 gallons (45 liters)
• Available in both air venturi and electric models
• 120 VAC, single phase, 50 Hz/60 Hz electric model standard
• 220 VAC, single phase, 50 Hz/60 Hz electric model optional
• Complete with hoses and straight cleaning tool
• Optional cleaning tools available
• Perfect for today's smaller machine tool sumps