Fluid Products / General Industry

TRIM C115RT is a high-performance synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool. It can be also used as a steel tube pressure test fluid.

• Compatible with a very wide range of materials including cast iron, steels, plastics and composites
• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after 1-2 days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM MicroSol 455 low-foam semisynthetic, microemulsion coolant is optimized for high-volume cast iron, ferrous, and some aluminum and nonferrous metalworking operations. MicroSol 455 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 455 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 455.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminum alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 456 low-foam semisynthetic, microemulsion coolant is optimised for high-volume cast iron, ferrous, and some aluminium and nonferrous metalworking operations. MicroSol 456 prevents leaching of elemental iron and eliminates clinkering and oxidation of ferrous micro fines.

Delivering extended sump life, machine-friendly MicroSol 456 provides excellent, cost-effective cooling. Make a difference to your bottom line with MicroSol 456.

• Low foaming for today's demanding high-pressure, high-volume applications
• Also for machining some aluminium alloys and nonferrous metals
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Low foaming for modern high-pressure, high-volume applications
• Uses standard metalworking recycling and disposal techniques
• Does not contain any chemical listed under Japan PRTR regulation
• Provides superior corrosion inhibition on all ferrous metals

TRIM SC445 is a semichemical cutting and grinding fluid concentrate. SC445 provides excellent cooling and good corrosion protection. This product contains a chemical surface active agent for providing good lubrication. SC445 can be used for a wide range of high-speed turning and grinding operations. SC445 leaves a thin layer of water soluble oil as residue.

• Compatible with a very wide range of materials including: cast iron, steels, and copper alloys as well as plastics and composites
• Provides excellent corrosion and rust inhibition on ferrous alloys, preventing clinkering problems of cast iron chips in machining
• Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
• Long sump life and low coolant consumption that reduce the cost for user
• Low odor and mist provides a good working environment
• Chlorine-free product
• Easy recycling or disposal with conventional techniques and equipment
• Compatible with the TRIM MicroSol and other high oil semisynthetic products
• Works very well in general machining where a more traditional soluble oil may not cool sufficiently

TRIM SC538AL is a high-performance semisynthetic fluid that provides excellent boundary lubrication characteristics for aluminum alloy machining. Suitable for general cutting of ferrous and non-ferrous metal materials, TRIM SC538AL achieves very satisfactory surface finishes and is widely used in the automotive and general machining industry. TRIM SC538AL complies with environmental protection and safety laws and regulations for automotive metalworking fluids, as well as the relevant element restrictions in Europe, USA, and Japan.

• Excellent cooling and lubrication properties, provides ultra-fine surface finish for aluminum alloy machining
• Provides excellent anti-corrosion protection for non-ferrous metals such as aluminum while avoiding corrosion and discoloration of the workpiece
• Suitable for stainless steel, aluminum alloys, and other non-ferrous and ferrous metals
• Excellent anti-foaming performance
• No sticky residue on the surface of the work piece
• Coolant residues are easily removed with water, working fluid, or water-based cleaning agents
• Good cleaning performance keeps the machines very clean
• Easy recycling and disposal with conventional techniques and equipment
• Provides excellent safety, reducing the risk of allergies for workers
• Meets the requirements of customers with high compliance requirements for metalworking fluids.

TRIM SC639 is a general purpose semisynthetic cutting and grinding fluid concentrate which provides an excellent balance between cooling and lubricity. SC639 has very good corrosion protection for both ferrous and non-ferrous metal, and can be used for a wide range of high-speed turning and grinding operations. SC639 leaves a thin layer of water soluble oil residue that provides extra protection to the machine tools parts while keeping the machine clean.

• Provides excellent lubricity for various machining applications
• Provides excellent corrosion and rust inhibition on ferrous and nonferrous alloys, preventing clinkering problems of cast iron chips in machining
• Keeps machines very clean and leaves a soft fluid film for easy cleaning and less machine maintenance
• Long sump life and low coolant consumption that reduce the cost for user
• Low odor and mist that provides a good working environment
• Good hard water tolerance up to 40 grain
• Easy recycling or disposal with conventional techniques and equipment

TRIM SC9030 is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. TRIM SC9030 is well suited for general high-speed machining and grinding of all materials and it leaves soluble emulsion oil as residue.

• Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composites
• Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials; and eliminates the "hot chip" and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Easy recycling or disposal with conventional techniques and equipment