Fluid Products / Aerospace

TRIM C115 is a high-performance, synthetic fluid for working cast iron and mild steels. State-of-the-art chemical technology provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness while leaving a protective film on the machine tool.

• Does an excellent job in most glass, ceramic, and composite grinding applications
• Excellent corrosion inhibition on most common ferrous and nonferrous alloys
• Extremely low carryoff keeps operating costs down
• Low foam and mist
• Very low initial odor level which usually disappears after one-to-two days
• Keeps your machines clean while leaving a soft, fluid film that protects bare metal parts
• Exceptional sump life and very good tramp oil rejection

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

• C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
• Provides excellent corrosion inhibition on all common ferrous alloys
• Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
• Extremely low carryoff for very low total operation costs
• Very low foam and mist
• Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
• Exceptional sump life and very good tramp oil rejection
• A very low initial odor level which usually disappears after one-to-two days

TRIM C276WP is a synthetic coolant concentrate which operates at very high fluid pressures and volumes with little or no foam. TRIM C276WP is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C276WP has superior cooling, rust prevention and chip settling characteristics of a premium synthetic product combined with excellent compatibility with sensitive aluminium alloys.

• Very stable formula provides long operational life with consistent performance
• Extremely low foam in mineral free water
• Excellent compatibility with sensitive aluminium alloys
• Excellent tramp oil rejection
• Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ E709 is high-quality, universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. The stable and predictable performance of E709 makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides long operational life with consistent performance
• Extremely hard water tolerant
• Very wide application range, suitable for both grinding and machining
• Fine particle size emulsion reduces carryoff and facilitates getting the fluid to the point of cut
• In high-speed turning and milling, E709 has the right balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with aluminum, steel alloys, cast iron, and yellow metals
• Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
• Coolant is easily removed with water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment
• Does not contain or test positive for phenol
• Will run effectively for long periods without the need for costly additives

TRIM E709QNI is a high-quality universal emulsion coolant concentrate. It has been designed for a broad range of metals allowing its effective use in most cutting and grinding operations. The stable and predictable performance of E709QNI makes it a first choice for high-quality, consistent parts manufacturing.

• Very stable formula provides good operational life with consistent performance
• Has a very wide application range allowing its effective use on cutting and grinding
• Good hard water tolerance
• Works very well in general machining where traditional soluble oil may not cool sufficiently.
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
• Good balance of cooling and lubrication to provide good tool life and surface finishes
• Compatible with most aluminum, steel, cast iron and brass material
• High tramp oil resistance for easy oil removal, longer coolant life, and more opportunities to be recycled
• Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
• Good cleaning performance keeps machine tools clean
• Easy recycling or disposal by using conventional techniques and equipment

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM GRIND WCS minimizes cobalt leaching in the grinding of tungsten carbide (WC) and other high cobalt materials. Minimal cobalt leaching means increased piece part integrity, while improving "G RATIOS" and reducing grinding forces. GRIND WCS is specifically designed for the carbide grinding industry; it will also perform very well in grinding ceramics, cermets, and tool steels.

• PRTR compliant
• Keeps super-abrasive wheels clean while not attacking super-abrasive wheel bonding systems
• Carries grinding swarf to the filter, but will release swarf in properly designed settling tanks
• Is not stripped out by conventional filtration systems
• Operators like GRIND WCS’s clear working solution for superior visibility while grinding
• Exceptional sump life and good tramp oil rejection for easy skimming
• Resists oxidation and varnishing
• Resists cobalt leaching for improved operator safety, stronger parts, and cleaner machines
• Very low carryoff equals low fluid makeup costs
• Easy recycling or disposal with conventional techniques and equipment

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 687NXT is a translucent, premium high-lube, PRTR compliant microemulsion. The product is low foaming in soft water but is also stable in hard water. The product is designed to machine difficult to machine metals, such as stainless steel and Inconel. It is also good for most aluminum alloys including aerospace grade.

• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Excellent compatibility with a very wide range of material including stainless steel, nickel alloys, titanium, and aluminum alloys
• Greatly extends useful life without the need for tank side biocides or fungicides
• Low foaming for modern high-pressure, high-volume applications
• Uses standard metalworking recycling and disposal techniques
• Does not contain any chemical listed under Japan PRTR regulation
• Provides superior corrosion inhibition on all ferrous metals

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM SC538AL is a high-performance semisynthetic fluid that provides excellent boundary lubrication characteristics for aluminum alloy machining. Suitable for general cutting of ferrous and non-ferrous metal materials, TRIM SC538AL achieves very satisfactory surface finishes and is widely used in the automotive and general machining industry. TRIM SC538AL complies with environmental protection and safety laws and regulations for automotive metalworking fluids, as well as the relevant element restrictions in Europe, USA, and Japan.

• Excellent cooling and lubrication properties, provides ultra-fine surface finish for aluminum alloy machining
• Provides excellent anti-corrosion protection for non-ferrous metals such as aluminum while avoiding corrosion and discoloration of the workpiece
• Suitable for stainless steel, aluminum alloys, and other non-ferrous and ferrous metals
• Excellent anti-foaming performance
• No sticky residue on the surface of the work piece
• Coolant residues are easily removed with water, working fluid, or water-based cleaning agents
• Good cleaning performance keeps the machines very clean
• Easy recycling and disposal with conventional techniques and equipment
• Provides excellent safety, reducing the risk of allergies for workers
• Meets the requirements of customers with high compliance requirements for metalworking fluids.

Master STAGES CLEAN 2021 is a concentrated, very high performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2021's oil rejecting properties mean longer bath life and economical operation.

• Excellent cleaning in immersion and ultrasonic tanks
• Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
• An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
• Will provide extended in-process tarnish resistance on copper and copper alloy parts
• Safe on aluminum, aluminum alloy, and magnesium
• Contains no borates, phenols or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no butyl cellusolve
• Will remove coolant residues as well as straight oils

Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

• A very specialized formula that draws many years of hands-on experience in machine clean outs
• Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
• Very hard water tolerant allowing it to be effective in raw water or used coolant
• Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
• When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
• Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways