The Future of Corrosion Protection
The Future of Corrosion Protection

Corrosion protection for overseas transportation with dewatering effect

Outstanding universal corrosion protection for long-term overseas transportation
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Brown, clear Visual
Density at 59°F: 0.81 g/cm3 ASTM D 7042
Viscosity at 68°F: 2.2 cSt ASTM D 7042
Flash point: > 40 °F DIN EN ISO 2719
Film weight: 1.4 g/m2 Dipping procedure
Film type: Oily Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 8 min Internal test method
Humidity test: 150 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 60 h DIN EN ISO 9227 NSS
Thin film wax corrosion protection, no influence on subsequent processes, for mid-term storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Medium-brown, clear Visual
Density at 59°F: 0.81 g/cm3 ASTM D 7042
Viscosity at 68°F: 2.3 cSt ASTM D 7042
Flash point: > 60 °F DIN EN ISO 2719
Film weight: 0.5 g/m2 Dipping procedure
Film type: Microwax Haptical
Dewatering effect: ≤ 30 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 90 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 24 h DIN EN ISO 9227 NSS

High performance dewatering fluids

Very fast dewatering, offers short-term corrosion protection, lower flash point
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Bright yellow, clear Visual
Density at 59°F: 0.79 g/cm3 ASTM D 7042
Viscosity at 68°F: 2.2 cSt ASTM D 7042
Flash point: > 40 °F DIN EN ISO 2719
Film weight: 0.3 g/m2 Dipping procedure
Film type: Very slightly oily Haptical
Dewatering effect: ≤ 5 s Internal test method
Water separation: 4 min Internal test method
Humidity test: 10 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: < 1 h DIN EN ISO 9227 NSS

Wax based products

Thick, waxy high performance product, potentially for outdoor storage
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Black, cloudy Visual
Density at 59°F: 0.81 g/cm3 ASTM D 7042
Viscosity at 68°F: 74.0 cSt ASTM D 7042
Flash point: > 38 °F DIN EN ISO 2719
Film weight: 28.0 g/m2 Dipping procedure
Film type: Waxy Haptical
Dewatering effect: None Internal test method
Water separation: None Internal test method
Humidity test: 1500 cycles DIN EN ISO 6270-2 AHT
Salt spray performance: 220 h DIN EN ISO 9227 NSS

Water-miscible corrosion protection

Water-miscible parts cleaner, very good corrosion protection, application at approximately 60°C, for steel and non-ferrous metals
Physical Properties Typical Data
Parameter Typical results Tested according to
Appearance: Dark brown, clear-slightly turbid Visual
Density at 59°F: 0.91 g/cm3 ASTM D 7042
Viscosity at 104°F: 44.0 mm2/s ASTM D 7042
Flash point: > 100 °F DIN EN ISO 2719
pH-value [20%; 158°F]: 9.8 DIN EN ISO 10523
Conductivity [20%; 158°F]: 1850 µS/cm DIN EN 27888
Corrosion protection properties
Concentration: 10% 20% 100% Tested according to
Film weight: 1.8 g/m2 4.7 g/m2 5.2 g/m2 Dipping procedure
Humidity test: > 1 d > 2 d > 4 d DIN EN ISO 6270-2 AHT
Salt spray performance: < 2 h < 16 h > 24 h DIN EN ISO 9227 NSS