Number of products: 69
Application: grinding
Metal: stainless steels [M]
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C270
High-performance Synthetic
This product has Rolls Royce Approval CSS 130
TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Provides excellent corrosion inhibition on all common ferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulphur-based EP additives
Extremely low carryoff for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
TRIM® C272
Cutting and Grinding Fluid Concentrate
TRIM C272 is a synthetic coolant concentrate designed to operate at very high fluid pressures and volumes with little or no foam. TRIM C272 is ideally suited to situations where high coolant velocities or volumes are necessary to achieve maximum productivity. TRIM C272 is designed to have the superior cooling and chip settling characteristics of a premium synthetic product with the improved residues and mechanical lubricity of a semi-synthetic coolant. This product utilises an extremely effective and proprietary non-chlorine, non-sulphur extreme pressure additive for good tool life and improved surface finishes
Approved by the following aero engine OEMs – Rolls-Royce, GE and Safran Aero Engines, contact your Master Fluid Solutions representative for the relevant approval documentation
Very stable formula provides long operational life with consistent performance
Extremely low foam in mineral free water
Excellent tramp oil rejection
Water clear dilution aids filterability, reduces carryoff and facilitates getting the fluid to the point of cut
Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
Easy recycling or disposal with conventional techniques and equipment
TRIM® C276
Clean-running Synthetic
TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling and tapping operations
Extremely low carryoff for very low total operation costs
Exceptional sump life and very good tramp oil rejection
Low initial charge odour which dissipates further after one or two days
Minimizes the buildup of sticky residues
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® C350
Premium Synthetic Metalworking Fluid
TRIM C350 is a synthetic metalworking fluid optimised for the chemical, environmental, and machining requirements of the aerospace industry. C350 uses the best polymer technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic polymer technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminium alloys.
Meets the most stringent nuclear and aerospace chemical content and machining requirements
Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminiums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
Water-clear, low foaming, and misting, C350 is a joy to work with and manage
Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
Easily removed from parts for easy cleanup before assembly, painting, or plating operations
Very low carryoff and long sump life results in low operating cost
TRIM® E850
Premium Emulsion
TRIM E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.
Delivers exceptional lubricity
Very long sump life and low carry-off rates result in low operating cost
Low foam even in soft water areas
Hard water tolerant
Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
Compatible with all materials excluding magnesium
Easily recycled or disposed of without special handling or equipment
Will run effectively for long periods without the need for costly additives
TRIM® E850
Premium Emulsion
TRIM E850 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The optimised lubricity and extreme pressure package delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.
Delivers exceptional lubricity
Very long sump life and low carry-off rates result in low operating cost
Low foam even in soft water areas
Hard water tolerant
Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
Compatible with all materials excluding magnesium
Easily recycled or disposed of without special handling or equipment
Will run effectively for long periods without the need for costly additives
TRIM® HyperSol™ 888NXT
neo-synthetic precision aerospace machining fluid
Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminium alloys. Delivering low foam, low odour and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!
exceptional performance on hard aerospace metals
superior lubricity for machining softer aluminium alloys
trouble-free production
safest, environmentally-friendly ingredients
long-running lifespan delivers high customer value
less scrap, low foam and low odour
Ian Sandusky / Practical Machinist Interview at 2022 IMTS
TRIM® MicroSol™ 530
High-lubricity Semisynthetic
TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.
Lubrication package gives excellent performance for aluminium machining
Excellent choice for aluminium alloy wheel machining applications
Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel® machining applications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Excellent alternative to milky soluble oils on aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and coolant carry-off
TRIM® MicroSol™ 530
High-lubricity Semisynthetic
TRIM MicroSol 530 is an environmentally-friendly semisynthetic, microemulsion coolant formulated especially for the machining of aluminium alloys. It utilises the newest technology to provide long-life and excellent protection of sensitive alloys. The outstanding lubrication properties of MicroSol 530 provide surface finish levels on aluminium components normally only seen with very high oil containing milky emulsions. Unlike those emulsions, MicroSol 530 is very clean running and keeps machine tools clear of unsightly residue build-up as well as reducing concentrate consumption.
Lubrication package gives excellent performance for aluminium machining
Excellent choice for aluminium alloy wheel machining applications
Optimised combination of cooling and lubricity for aluminium, titanium, steel, stainless steel, and Inconel® machining applications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Excellent alternative to milky soluble oils on aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and coolant carry-off
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank side biocides or fungicides
Formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of material including steels, copper, and aluminium alloys, and many plastics and composites
Optimised combination of cooling and lubricity for titanium machining applications
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols and chlorinated or sulfurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 590XT
Advanced Technology Aerospace Semisynthetic
TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilises the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.
Meets the most stringent aerospace specifications
Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
Free of chlorine, formaldehyde releasers, phenols, boron, and secondary amines
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Optimised combination of cooling and lubricity for titanium, aluminium, steel, stainless steel, and Inconel® machining applications
Excellent alternative to milky soluble oils on high-silica aluminium alloys
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps parts and machines very clean to reduce maintenance and production time
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® MicroSol™ 690XT
High-lubricity, Low-foam Premium Semisynthetic
TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations.
Dramatically extends useful life without the need for tank side biocides or fungicides
Boron and formaldehyde free
Low foaming for demanding high-pressure, high-volume applications
Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper and aluminium alloys
Excellent alternative to high mineral oil soluble oils on high-silica aluminium alloys
Contains no nitrites, phenols, chlorinated or sulphurised EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
TRIM® OE105
Ester Based Superfinishing Oil
TRIM OE105 is an ester based neat grinding oil formulated for fine grinding and superfinishing. TRIM OE105 imparts excellent lubricity whilst keeping grinding wheels and stones extremely clean. This ensures fantastic surface finishes on hardened steel alloys, stainless steels and non-ferrous materials
Excellent extreme-pressure additive package for efficient metal removal
Ester based formulation ensures very low misting potential
Very high flash point for such a low viscosity product
Compatible with copper containing alloys
Light colour and low odour for good operator acceptance
TRIM® OE209
Ester Based Cutting and Grinding Oil
TRIM OE209 is a medium to heavy-duty neat cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximise tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.
Extremely high lubricity ensures fantastic tool life
Excellent detergency keeps grinding wheels clean
Does not leach cobalt from carbide tool alloys
Chlorine and sulphur free
Readily biodegradable
Saturated ester based formulation ensures very low foam and misting
Very High flash point
Unsurpassed oxidation stability
Compatible with copper containing alloys
Light colour and low odour for good operator acceptance
TRIM® OE209
Ester Based Cutting and Grinding Oil
TRIM OE209 is a medium to heavy-duty neat cutting and grinding oil formulated using highly stable fully saturated esters. The product is certified as readily biodegradable. TRIM OE209 is designed for use in grinding and machining applications of hardened steel alloys, tool steels, stainless steels and carbide. TRIM OE209 has the lubricity and performance to maximise tool life in operations such as deep hole drilling and is particularly well suited for use in Sliding Head machines with high pressure chip breaker units.
Extremely high lubricity ensures fantastic tool life
Excellent detergency keeps grinding wheels clean
Does not leach cobalt from carbide tool alloys
Chlorine and sulphur free
Readily biodegradable
Saturated ester based formulation ensures very low foam and misting
Very High flash point
Unsurpassed oxidation stability
Compatible with copper containing alloys
Light colour and low odour for good operator acceptance
TRIM® OG108
High Performance Tool Grinding Oil
TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
Very highly refined base oil ensures low mist and high flash point
Good flushing properties keeps grinding wheels very clean
Excellent friction reducing properties ensures long wheel life
Excellent heat transferring properties
Excellent oxidation stability
Highly filterable in pre-coat filter systems
Low foaming
No reaction with cobalt
Kind to machine components and elastomers
Light colour and low odour for good operator acceptance
TRIM® OG108
High Performance Tool Grinding Oil
TRIM OG108 is a very high specification grinding oil formulated for carbide and HSS tool grinding operations. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and high flash point. TRIM OG108 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
Very highly refined base oil ensures low mist and high flash point
Good flushing properties keeps grinding wheels very clean
Excellent friction reducing properties ensures long wheel life
Excellent heat transferring properties
Excellent oxidation stability
Highly filterable in pre-coat filter systems
Low foaming
No reaction with cobalt
Kind to machine components and elastomers
Light colour and low odour for good operator acceptance
TRIM® OG210
General Grinding Oil
TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
Very highly refined base oil ensures low mist and high flash point
Good flushing properties keeps grinding wheels very clean
Excellent lubricity and EP properties ensures long wheel life and good surface finish
Excellent heat transferring properties
Excellent oxidation stability
Highly filterable in pre-coat filter systems
Low foaming
No reaction with cobalt
Kind to machine components and elastomers
Light colour and low odour for good operator acceptance
TRIM® OG210
General Grinding Oil
TRIM OG210 is a very high specification, EP containing grinding oil formulated for grinding operations on all materials. The product utilises a very highly refined hydrocracked base oil which ensures very low levels of mist and a high flash point. TRIM OG210 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
Very highly refined base oil ensures low mist and high flash point
Good flushing properties keeps grinding wheels very clean
Excellent lubricity and EP properties ensures long wheel life and good surface finish
Excellent heat transferring properties
Excellent oxidation stability
Highly filterable in pre-coat filter systems
Low foaming
No reaction with cobalt
Kind to machine components and elastomers
Light colour and low odour for good operator acceptance
TRIM® SC617
High Performance Semisynthetic Fluid
TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.
A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
Extremely good product for cast iron, steel and stainless steel machining and grinding
Low foam profile enables use in through tool machining applications
Very fine emulsion reduces carry-off for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Extremely hard water tolerant
Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life
TRIM® SC617
High Performance Semisynthetic Fluid
TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.
A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
Extremely good product for cast iron, steel and stainless steel machining and grinding
Low foam profile enables use in through tool machining applications
Very fine emulsion reduces carry-off for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Extremely hard water tolerant
Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life
TRIM® SC617
High Performance Semisynthetic Fluid
TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.
A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
Extremely good product for cast iron, steel and stainless steel machining and grinding
Low foam profile enables use in through tool machining applications
Very fine emulsion reduces carry-off for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Extremely hard water tolerant
Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life
TRIM® SC617
High Performance Semisynthetic Fluid
TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.
A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
Extremely good product for cast iron, steel and stainless steel machining and grinding
Low foam profile enables use in through tool machining applications
Very fine emulsion reduces carry-off for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Extremely hard water tolerant
Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life
TRIM® SC617
High Performance Semisynthetic Fluid
TRIM SC617 is a semisynthetic concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and non-ferrous materials. TRIM SC617 uses a proven EP additive package to control built-up edge, improve tool life, and has the wetting and cooling characteristics for superior turning, milling and grinding results. It also has sufficient lubrication for most "down-the-hole" operations on machining centers.
A very versatile product that works well in a wide range of operations such as grinding, sawing, milling, turning, drilling, and tapping
Extremely good product for cast iron, steel and stainless steel machining and grinding
Low foam profile enables use in through tool machining applications
Very fine emulsion reduces carry-off for low total operating cost
Fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior corrosion prevention
Extremely hard water tolerant
Excellent tramp oil rejection together with highly biostable formulation ensures very long sump life