Master STAGES

Master STAGES™ BLOC N BOND 9739SC

Single-stage Detergent Iron Phosphate for High-pressure Spray

BLOC N BOND 9739SC is an acidic liquid iron phosphate designed to clean and coat multi-metal surfaces using manual power spray equipment and steam generators.

  • Detergent package quickly and effectively cleans surface prior to producing phosphate coating
  • Accelerator ingredients quickly produces iron phosphate coating
  • Can be used at low to moderate temperature
  • Equipment can be constructed of mild steel

  • Master STAGES™ BLOC N BOND 9777

    Premium Performance, Detergent Iron Phosphate

    BLOC N BOND 9777 is a unique detergent iron phosphate chemical which is totally based on ammonium salts and is virtually sodium-free. It effectively cleans and phosphates ferrous metals and can often times reduce sludge in bath. Additionally it reduces the amount of residue and water spotting effects, which can often "telegraph" through or react adversely with some paints, such as high solids type.

  • Multi-metal capabilities
  • Powder and residue-free iron phosphate coatings
  • Used in two-, three-, and five-stage spray systems
  • Fluoride-free
  • Capable of also being used in immersion applications
  • Capable of running as low as 100°F

  • Master STAGES™ CID 5683

    Acidic Detergent

    CID 5683 is a concentrated phosphoric acid detergent that excels at cleaning a variety of metals. CID 5683 will remove rust from steel and cast iron, and other oxides on stainless steel, aluminum, and some other nonferrous metals.

  • Concentrated formula
  • Removes organic and inorganic soils
  • Used at ambient temperatures to reduce energy costs or can be heated for difficult applications
  • Spray or immersion capable
  • Use as part of a system or as a stand-alone process

  • Master STAGES™ CID 5922

    Inhibited Acid Cleaner for De-scaling Equipment

    CID 5922 is an inhibited acid cleaner designed to clean and de-scale washer equipment by dissolving ferric phosphate scale and sludge buildup from tank walls, heating elements, and recirculation pipes.

  • Quickly removes hard water buildup from metal surfaces
  • Inhibited formula reduces attack on equipment components
  • Typically operates at ambient temperatures

  • Master STAGES™ CLEAN 151

    Washing Compound Concentrate




    Master STAGES™ CLEAN 1700

    Heavy-Duty Granular Immersion Cleaner

    Master STAGES™ CLEAN 1700 is a concentrated, very high performance granular cleaner made for washing iron and steel parts in hot tank immersion washing systems. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles, or elimination of cleaning steps. CLEAN 1700 oil dispersing properties mean longer bath life and economical operation.

  • Excellent cleaning in agitated and non-agitated hot tanks
  • Long life because soils are generally dispersed and inactivated - eliminating re-deposition and rinsing problems
  • An excellent choice where one product is required for multiple purposes, such as rust, carbon smut, and some paint removal
  • 100% active formulation allows for very economical use

  • Master STAGES™ CLEAN 1701T

    Heavy Duty Granular Immersion Cleaner




    TRIM® CLEAN 177

    High Pressure Parts Washing Fluid, Corrosion Inhibitor, and Grinding Coolant

    TRIM CLEAN 177 is a concentrated multi-purpose fluid that excels as a liquid parts washing compound, grinding fluid, or corrosion inhibitor and does not foam even in very high pressure spray washers. It will remove light oils and water soluble cutting and grinding fluid residues, and leave behind a thin rust inhibiting film for in-process corrosion inhibition of ferrous parts and is also safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. CLEAN 177 is an excellent choice in cast iron operations where it can be used for machining, grinding, cleaning, and rust inhibition with excellent biostability.

  • Silicate free and leaves no powdery residue
  • Low foaming for use in even the highest pressure spray washers or grinders, and it has excellent hard water stability
  • Has a moderate pH, excellent anti-corrosion and does not require rinsing making it an excellent short term in-process corrosion inhibitor
  • Used successfully in grinding and machining cast iron parts, it has excellent wetting without foaming to cool abrasive machining operations like grinding and cutoff operations
  • This product maintains its alkalinity and biostability for long periods of time and will tolerate stagnant conditions such as leak test baths, and is also used in pressure and leak testing applications

  • Master STAGES™ CLEAN 180

    Rust Inhibitor/Washing Compound Concentrate

    TRIM CLEAN 180 is a highly concentrated liquid parts washing compound/corrosion inhibitor designed for use in spray washers. This product will remove water soluble cutting and grinding fluid residues, and leave behind an invisible rust inhibiting film for in-process corrosion inhibition of ferrous parts. TRIM CLEAN 180 is safe for use on aluminum alloy and steel alloy parts, as well as cast iron, copper, brass, and bronze. TRIM CLEAN 180 is a true one-step cleaner/rust inhibitor.

  • Silicate free and leaves no powdery residue
  • Low foaming for use in even the highest pressure spray washers, and has excellent hard water stability
  • Has a moderate pH, excellent anti-corrosion properties, and does not require rinsing
  • Contains no phosphates and is non-nitrated

  • Master STAGES™ CLEAN 2017

    Economical Heavy-duty Spray Cleaner

    Master STAGES™ CLEAN 2017 is an economical heavy-duty spray cleaner that removes heavy soils and oily residues from ferrous and magnesium parts. Often used in rebuild operations and for cleaning up cast iron, stamped or drawn steel parts, or removing heavy RP coatings.

  • Very economical way to remove heavy soils and light rust
  • Low foaming at ambient temperatures, and even lower when used above 120°F (49°C)
  • Can be recycled using XYBEX equipment
  • Contains no solvents, borates, silicates, nitrites, or amines
  • Long bath life
  • Excellent compatibility with magnesium
  • Will prevent flash rusting and provide one-to-two days of in-process corrosion inhibition if not rinsed

  • Master STAGES™ CLEAN 2020

    Washing Compound for Ultrasonic and Immersion Washers

    Master STAGES™ CLEAN 2020 is a concentrate very high-performance cleaner made for washing all metals including brass, copper alloy, and aluminum in ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2020's oil rejecting properties mean longer bath life and economical operation.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes; such as washing mixed batches of ferrous, aluminum, and copper alloy parts
  • Will provide extended in-process tarnish resistance on copper and copper alloy parts
  • Safe on aluminum, aluminum alloy, and magnesium
  • Will remove coolant residues as well as straight oils

  • Master STAGES™ CLEAN 2022

    Washing Compound for Brass, Aluminum, and Multi-Metal Parts

    Master STAGES™ CLEAN 2022 is a highly concentrated, liquid parts washing compound with yellow metal corrosion inhibitor for medium and high-pressure spray washing. This product is made for use on brass and copper alloy and aluminum alloy. It also does a super job washing steel alloy parts, as well as cast iron. Because of its rapid oil split, it’s excellent for use in spray washers providing good detergency and long life for the removal of light to medium soils. CLEAN 2022 provides limited in-process ferrous corrosion inhibition when not rinsed, but should be rinsed in most applications.

  • Inhibits surface oxidation on brass, copper alloy and aluminum
  • Noncorrosive
  • Prevents flash rusting on steel or cast iron parts if not rinsed
  • Provides excellent choice for two or three-stage spray washers and can be used for washing steel, stainless, cast iron, titanium, and aluminum alloys
  • Provides long bath life
  • Contains no borates or EPA 33/50 listed ingredients; and contains no butyl cellosolve
  • Low foaming for use in high-pressure spray washers above 90˚F
  • Nitrite free and should be rinsed in most applications

  • Master STAGES™ CLEAN 2029 'One Step'

    Parts Washing Fluid with Corrosion Inhibitor

    Master STAGES™ CLEAN 2029 "One Step" is a highly concentrated cleaner/corrosion inhibitor designed for spray washers and immersion tanks. This product will remove heavy soils and provide two-to-four weeks of indoor corrosion inhibition on steel and cast iron parts.

  • Formulated without silicates or other high pH additives, CLEAN 2029 "One Step" is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Hard water tolerant, it provides long bath life
  • Environmental approvals are simplified because CLEAN 2029 "One Step" contains no nitrites, barium, phenols, or butyl cellosolve
  • This formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 140°F (60°C)

  • Master STAGES™ CLEAN 2029HW

    Water Miscible Washing Compound Concentrate




    Master STAGES™ CLEAN 2030

    Cleaner/Corrosion Inhibitor for Ultrasonic and Immersion Washers

    Master STAGES™ CLEAN 2030 is a concentrated, very high-performance cleaner made for washing iron and steel parts and applying a short-term corrosion inhibitor in single-stage ultrasonic or immersion washers. Its cleaning ability is extraordinary, which often leads to shorter cleaning cycles or elimination of cleaning steps. CLEAN 2030's oil-rejecting properties mean longer bath life and economical operation. CLEAN 2030 can also wash most other metals including brass, copper alloy, aluminum, zinc, and magnesium.

  • Excellent cleaning in immersion and ultrasonic tanks
  • Long life because oils split rapidly to the surface of your cleaner tank where they can be skimmed off
  • An excellent choice where one product is used for multiple purposes, such as washing mixed batches of ferrous, aluminum, and copper alloy parts in a single-stage washer
  • Will provide one-to two-weeks' indoor rust inhibition on iron and steel, as well as in-process tarnish resistance on copper and copper alloy parts
  • Will remove coolant residues as well as straight oils

  • Master STAGES™ CLEAN 2115

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2115 is a high-performance, low-foam spray washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control, tramp oil rejection, and soil removal while leaving a short-term, anticorrosive film on cast iron or steel parts and washer surfaces.

  • When washing aluminum parts above 100°F (40°C) consider using Master STAGES™ CLEAN 2115AL
  • Does not foam even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115 an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115 applications are in the range of 3,000 PSI - 10,000 PSI (20684 - 68947 kPa)
  • Provides excellent short-term corrosion inhibition on most common ferrous alloys
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Can be used on most aluminum alloys if kept under 100°F (40°C)
  • Exceptional sump life and great tramp oil rejection

  • Master STAGES™ CLEAN 2115AL

    Low-foam Spray Washing Compound

    Master STAGES™ CLEAN 2115AL is an aluminum compatible, high-performance, low-foam synthetic washing compound for use in very high-pressure spray washers, de-burring, and water jet cutting. Advanced surfactant technology provides excellent foam control and tramp oil rejection.

  • Compatible with a wide range of materials including aluminum, cast iron, steels, zinc, plastics, and composites
  • Resists foaming even when contaminated with large quantities of soils or coolant. This makes CLEAN 2115AL an excellent choice where rapid buildup of coolant carryover creates a foam problem
  • Many CLEAN 2115AL applications are in the range of 3,000 to 10,000 PSI (20684 to 68947 kPa)
  • Provides short-term corrosion inhibition on cast iron and ferrous alloys
  • Excellent biostability
  • Extremely low carryoff keeps operating costs down
  • Low foam and mist
  • Very low initial odor level
  • Exceptional sump life and great tramp oil rejection

  • Master STAGES™ CLEAN 2229NP

    Phosphate-Free Washing Fluid with Corrosion Inhibitor

    Master STAGES™ CLEAN 2229NP is a highly concentrated, phosphate-free cleaner/corrosion inhibitor that excels in spray washers. This product will remove heavy soils and provide two to four weeks of indoor corrosion inhibition on steel and cast iron parts. Clean 2229NP is also a fine choice for working iron and most aluminum alloys.

  • CLEAN 2229NP will reliably provide two to four weeks of indoor corrosion inhibition on steel or cast iron parts, if not rinsed
  • Formulated without phosphates, silicates, or other high pH additives, CLEAN 2229NP is compatible with ultrafiltration systems and bioremediation
  • An excellent choice for cabinet-style spray washers and can be used for washing steel, stainless, cast iron, titanium, and many aluminum alloys
  • Environmental approvals are simplified because CLEAN 2229NP contains no nitrites, barium, phenols, or butyl cellosolve; this formula has very low VOC content and no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers with temperatures above 105ºF (41°C)

  • Master STAGES™ CLEAN 242

    Washing Compound Concentrate




    Master STAGES™ CLEAN 243 Splitter Plus

    Washing Compound Concentrate
    Will be discontinued Octovber 3, 2005

    TRIM CLEAN 243 Splitter Plus is a highly concentrated liquid parts washing compound/corrosion inhibitor designed for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product is excellent for use in single stage spray washers providing good detergency and long life for the removal of light soils. CLEAN 243 may be used in medium and high pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in even the highest pressure spray washers
  • CLEAN 243 splits oils to the surface of the cleaner tank for easy skimming with a Master Fluid Solutions SCROUNGER or Sump Side Coalescer
  • Is hard-water stable and an excellent choice where ferrous, aluminum and copper alloy parts are being washed in a single washer system
  • Has a moderate pH and good anti-corrosion properties if not rinsed
  • Provides long life between washer cleanouts

  • Master STAGES™ CLEAN 2430

    Near-neutral Washing Compound

    Master STAGES™ CLEAN 2430 is a highly-concentrated, mild pH, liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass, and bronze. This product does a great job in single and multi-stage spray washers providing great detergency and long life. CLEAN 2430 may be used in medium and high-pressure spray washers and provides in-process corrosion inhibition when not rinsed.

  • CLEAN 2430 provides state-of-the-art cleaning performance in a mild pH package
  • Nitrite and silicate free and leaves no powdery residue
  • Low foaming at normal operating temperatures for use in high-pressure spray washers
  • CLEAN 2430 "splits" oils to the surface of the cleaner tank for easy skimming
  • Is very hard-water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides a week or more of indoor anti-corrosion for ferrous metals if not rinsed
  • Provides long life between washer cleanouts

  • Master STAGES™ CLEAN 285

    Washing Compound Concentrate

    TRIM CLEAN 285 is a high strength, phosphated liquid cleaning concentrate designed to remove straight cutting oils, drawing compounds, and other tough soils from all ferrous metal parts. It is low foaming but also effective in immersion baths.

  • TRIM CLEAN 285 is highly concentrated, with lots of reserve power for long bath life. Low concentrations are effective, providing greater economy to the user
  • This product contains no nitrates or silicates
  • Liquid concentrate for ease of mixing
  • Provides excellent rust protection if not rinsed
  • Leaves thin nonpowdery corrosion resistant residue
  • Very low foaming for use in spray washers
  • Low ratio of concentration required for economical performance
  • Low odor

  • Master STAGES™ CLEAN 7140HD

    Heavy-duty, Alkaline Degreaser for Spray and Immersion

    Master STAGES™ CLEAN 7140HD is a highly concentrated, heavy-duty spray cleaner specially designed for removing heavy grease and oil residues from ferrous parts. CLEAN 7140HD is an ideal choice for remanufacturing/rebuilding operations.

  • CLEAN 7140HD provides exceptional cleaning for removing heavy grease and oil residues without the use of solvents
  • Compatible with zinc alloys and galvanized materials
  • Low foaming when used above 120°F
  • CLEAN 7140HD contains no V.O.C
  • Can be recycled using XYBEX® equipment
  • Contains no solvents, borates, silicates, nitrites, phosphates, EDTA, NPEs, or amines
  • Typically provides one to three days of in-process corrosion inhibition on ferrous parts if not rinsed

  • Master STAGES™ CLEAN AMO™

    Natural-solvent Cleaner and Degreaser

    Master STAGES™ CLEAN AMO™ A maize `N Orange™ is a natural-solvent cleaner that can be mixed with water and used for a wide range of industrial cleaning jobs. CLEAN AMO does an outstanding job removing oily, greasy, or resinous soils at room temperature.

  • CLEAN AMO cleans with natural solvents extracted from corn (maize) and oranges (d-limonene), along with several additional ingredients that improve performance and water mixability
  • With a neutral pH and low conductivity, AMO will not cause splitting of TRIM coolants
  • Compatible with ultrafiltration systems and bioremediation
  • Unlike most water-mixable degreasers, CLEAN AMO does not require heating to remove greases and resins
  • AMO can be used straight (100%) or cut back with water depending on the application
  • There are no mineral oils or petroleum solvents in CLEAN AMO
  • AMO can be used for general cleaning tasks and to remove soils from parts, tools, and machines
  • Users like CLEAN AMO's very mild, pleasant orange scent
  • Environmental approvals are simplified because CLEAN AMO contains no nitrites, barium, phenols, or butyl cellusolve and has no SARA 313 reportable ingredients
  • Effective mop bucket cleaner
  • For use in floor scrubber machines
  • Rinses off easily with plain water

  • Master STAGES™ CLEAN B1

    Booster for High-performance Spray Cleaning

    Master STAGES™ CLEAN B1 is a highly concentrated blend of surfactants (surface-active agents) designed to add cleaning power to high-pressure spray washers without causing excessive foaming. The product may be added to a wide range of Master STAGES™ alkaline cleaners to boost cleaning power.

  • Contains no borates, phosphates, nitrites, or amines
  • Low foaming when used above 115°F (46°C)
  • Excellent choice where both ferrous and/or copper alloy parts are being processed
  • Will not stain aluminum parts
  • Odorless
  • Highly caustic cleaners often produce "soaps" as a part of their cleaning action; CLEAN B1 is very effective at reducing foam resulting from the formation of these soaps
  • Cleaner bath life can often be extended by using small doses of CLEAN B1; this product is particularly effective in removing oily soils, but will not affect the "split" of oils in Master STAGES™ CLEAN 2430
  • Will add detergency power to immersion cleaners as well as ultrasonic baths

  • Master STAGES™ CLEAN B3

    Detergent Booster/Defoamer

    Master STAGES™ CLEAN B3 is a highly concentrated blend of surfactants (surface-active agents) designed to add cleaning power to high-pressure spray washers without causing excessive foaming. The product may be added to a wide range of Master STAGES™ alkaline cleaners to boost cleaning power.

  • CLEAN B3 contains no borates, phosphates, nitrites, or amines
  • B3 is low foaming when used above 105°F
  • This product is an excellent choice where both ferrous and/or copper alloy parts are being processed
  • CLEAN B3 will not stain aluminum parts
  • CLEAN B3 is odorless
  • Highly caustic cleaners often produce “soaps” as a part of their cleaning action; CLEAN B3 is very effective at reducing foam resulting from the formation of these soaps
  • Cleaner bath life can often be extended by using small doses of CLEAN B3; this product is particularly effective in removing oily soils, but will not affect the “split” of oils in Master STAGES CLEAN 2430

  • Master STAGES™ CLEAN CCT

    Super Heavy-duty Spray Cleaner for Heavy Grease and Oil Removal

    TRIM CLEAN CCT is a highly concentrated super heavy-duty spray cleaner specially designed for removing heavy grease and oil residues from steel parts - as in parts cleaning and rebuilding operations.

  • When it comes to removing heavy grease and oil residues without solvents, CLEAN CCT has no equal
  • Also compatible with many magnesium alloys
  • Low foaming when used above 130°F
  • Can be recycled using XYBEX® equipment
  • Contains no solvents, borates, silicates, nitrites or amines
  • Cleaner bath life has been extended by the addition of dispersants and anti-redeposition additives which allow CLEAN CCT to hold a great deal of soil in suspension while continuing to clean
  • Typically provides one to three days of in-process corrosion inhibition on ferrous parts if not rinsed

  • Master STAGES™ CLEAN DF1

    Antifoam for Master STAGES™ Cleaners

    Master STAGES™ CLEAN DF1 is a paintable, nondimethyl, polysiloxane, antifoaming agent designed to eliminate excessive foaming in Master STAGES™ products. This product does not require premixing.

  • Does not require premixing
  • Compatible with most Master STAGES cleaners and most water-based metalworking fluids
  • Odorless
  • Does not cause staining
  • Is free of phenols, borates, phosphates, nitrites, or amines

  • Master STAGES™ CLEAN F2™

    Non-butyl Floor and Multi-purpose Cleaner

    Master STAGES™ CLEAN F2™ is a super concentrate that does an outstanding job in floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it is often used for general-purpose cleaning, mop bucket cleaning, and parts washing in room temperature wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

  • With a mild pH and low conductivity, CLEAN F2 will not cause splitting of TRIM coolants
  • Formulated without silicates or other high pH additives, CLEAN F2 is compatible with ultrafiltration systems and bioremediation
  • CLEAN F2 has been proven nonirritating to skin at 20% concentration
  • Excellent choice for use in spray bottles up to 20%
  • Use for general cleaning tasks and to remove soils from parts and tools
  • Operators like CLEAN F2's mild, pleasant citrus scent
  • Environmental approvals are simplified because CLEAN F2 contains no nitrites, barium, phenols, or butyl cellusolve; and has very low V.O.C. content and no SARA 313 reportable ingredients
  • Effective mop bucket cleaner
  • Use in floor scrubber machines
  • Will remove heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; suitable for concrete, painted, tile, or linoleum floors

  • Master STAGES™ CLEAN FMP

    Recyclable & Biodegradable Non-Butyl Floor & Multi-Purpose Cleaner

    TRIM CLEAN FMP is a highly concentrated cleaner designed for floor cleaning and other multi-purpose uses. In addition to its primary job in automatic floor scrubbers, it can be used for general purpose cleaning, mop bucket cleaning, and parts washing in aqueous wash tanks. The mild pH of this product means it is compatible with most waste treatment (including ultrafiltration) and it will not degrade TRIM metalworking fluids with which it may come into incidental contact.

  • With a very mild pH and low conductivity, CLEAN FMP will not cause splitting of TRIM coolants
  • Formulated without silicates or other high pH additives, CLEAN FMP is compatible with ultrafiltration systems and bio-remediation
  • Is an excellent choice where one product is used for multiple purposes
  • Can be used for general cleaning tasks and to remove soils from parts and tools
  • Hard water tolerant, CLEAN FMP has a mild, pleasant citrus scent
  • Contains no borates or nitrites, no SARA 313 or EPA 33/50 listed ingredients, and contains no Butyl Cellusolve
  • Is an effective mop bucket cleaner in addition to use in floor scrubber machines
  • Will remove heavy soils from floors without lifting off floor paints, coatings or leaving a slippery residue. Suitable for concrete, painted, tile, or linoleum floors

  • Master STAGES™ CLEAN IP 2019s

    Silicated Low-foam Cleaner

    Master STAGES™ CLEAN IP 2019s is a very low-foaming, liquid, cleaning concentrate designed to remove straight oils and coolants from steel, cast iron, and most aluminum parts.

  • An excellent cleaner and very economical to use
  • Compatible with aluminum, cast iron, and steel alloys
  • Rejects oil for easy skimming or centrifuging to extend bath life
  • Nonfoaming at high-pressure in a spray washer and vibratory deburring machines even at room temperature
  • Provides flash corrosion inhibition and up to two weeks of short-term, dry, in-process corrosion inhibition

  • Master STAGES™ CLEAN IP 2026PF

    Phosphate-free Cleaner

    Master STAGES™ CLEAN IP 2026PF is a highly concentrated liquid parts-washing compound for use in spray and immersion washers, including ultrasonics. This product is safe and effective on aluminum alloys and steel parts, as well as cast iron, brass, zinc, titanium, and magnesium. CLEAN IP 2026PF provides good detergency and long life for the removal of coolants, straight oils, corrosion inhibitors, and all types of metalworking fluids. CLEAN IP 2026PF has been found to be highly useful in the diverse and difficult cleaning applications found within engine and transmission remanufacturing operations.

  • Prevents flash rusting on steel or cast iron parts if not rinsed
  • In many cases it minimizes or eliminates the need for multiple cleaning products since it is very effective in spray and immersion application. Excellent choice for two- or three-stage washer systems
  • Provides long bath life
  • Environmental approvals are simplified because CLEAN IP 2026PF contains no nitrites, barium, phenols, phosphates, or butyl cellusolve; this formula is NPE free and has no SARA 313 reportable ingredients
  • Low foaming for use in high-pressure spray washers when used above 120˚F

  • Master STAGES™ MASTER BRITE 5001

    Aluminum Brightener

    MASTER BRITE 5001 is a blend of detergents, solvent, and acids for cleaning and brightening of aluminum surfaces, including castings and extrusions, MASTER BRITE 5001 is used in immersion operations only.

  • Concentrated formula for optimum performance and economy
  • Removes light oxides and brightens dull and discolored surfaces
  • Operates at room temperature, saving on energy cost

  • Master STAGES™ MASTER BRITE 5308A

    Copper and Brass Brightener

    MASTER BRITE 5308A and 5308B are a two-part acidic solution system designed to clean and brighten copper and brass parts.

  • Quickly removes light oxidation and oil
  • Concentrated formula can be used as low as 5%
  • Does not require heat

  • Master STAGES™ MASTER BRITE 5308B

    Copper and Brass Brightener

    MASTER BRITE 5308A and 5308B are a two-part acidic solution system designed to clean and brighten copper and brass parts.

  • Quickly removes light oxidation and oil
  • Concentrated formula can be used as low as 5%
  • Does not require heat

  • Master STAGES™ N-CLEAN NP

    Neutral pH Spray Cleaner

    Master STAGES™ N-CLEAN NP is a phosphate-free, very mild pH liquid parts washing compound/corrosion inhibitor made for aluminum alloy and steel alloy parts as well as cast iron, copper, brass and bronze. This product does a great job of removing coolants or light oils in single and multi-stage spray washers. N-CLEAN NP meets strict international standards for biodegradability.

  • N-CLEAN NP provides state–of-the-art cleaning performance in a near-neutral pH package
  • Phosphate, nitrite, and silicate free and leaves no powdery residue
  • Biodegradable and very environmentally friendly
  • Low foaming at ambient temperature. Very low foaming when used above 128°F (54°C)
  • N-CLEAN NP “splits” oils to the surface of the cleaner tank for easy skimming
  • Hard water stable and an excellent choice where ferrous, aluminum, and copper alloy parts are being washed in a single washer system
  • Has a mild pH and provides flash rust protection for ferrous metals if not rinsed
  • Contains no biocides or solvents

  • Master STAGES™ NOCOR® E12

    Water-Based Low V.O.C. Emulsion Corrosion Inhibitor

    Master STAGES™ NOCOR E12 is a barium-free, water-based emulsion corrosion inhibitor designed to protect steel, cast iron, and yellow metal parts from in-plant corrosion for periods in excess of 12 months (depending on concentration as applied). The product may be applied as received or mixed with water. Parts coated with TRIM NOCOR E12 have a soft, almost invisible, film which is easily removed using mild industrial cleaners.

  • Environmental approvals are simplified because NOCOR E12 is barium, boron, phenol, and phosphate free
  • Low foaming, for use in low-pressure sprayers and flow coating operations; however, dip application is usually preferred
  • Excellent choice where both ferrous and/or copper alloy parts are being processed - it will not stain aluminum parts
  • Moderate pH, practically odorless, and nonflammable for improved safety

  • Master STAGES™ NOCOR® E6

    Low V.O.C. Emulsion Corrosion Inhibitor Concentrate

    Master STAGES™ NOCOR E6 is a super-concentrated, barium-free, water-based emulsion rust inhibitor that will protect steel, cast iron, and other ferrous parts from in-plant corrosion for up to six months. Parts coated with NOCOR E6 have a soft, almost invisible film that is easily removed using mild cleaners.

  • Environmental approvals are simplified because NOCOR E6 is nitrite, barium, boron, phenol, and phosphate free
  • NOCOR E6 is low foaming, for use in low-pressure spray washers and flow coating operations. Dip application is also a good way to apply this product
  • An excellent choice where both ferrous and/or copper alloy parts are being processed
  • NOCOR E6 has a moderate pH, is practically odorless, and is nonflammable for improved safety
  • Working concentration ranges from 4% - 16% which translates into much lower cost than traditional straight oil/solvent products

  • Master STAGES™ NOCOR® S1

    Water Soluble Corrosion Inhibitor / Leak Test Fluid


    Master STAGES™ NOCOR S1 is a synthetic, water soluble, ferrous corrosion inhibitor/rinse for short-term storage or shipment. Effective at concentrations from 3%-15% in water, it provides a very thin, water soluble protective surface. NOCOR S1 is very low foaming for use in spray cabinets and can also be used as a vibratory finishing or burnishing compound. NOCOR products do not contain nitrites or barium compounds.

  • The transparent surface left by NOCOR S1 is easily removed and will not interfere with additional machining, gauging, or assembly steps
  • In leak test tanks, NOCOR S1 remains clear and its light green fluorescent color is an advantage for visibility. It also provides good residual corrosion protection
  • NOCOR S1 has no odor, a moderate pH and is safe to work with
  • NOCOR S1 is ideal as a final stage rinse for multi-stage washer systems. It can also be used as a single step wash/RP when cleaning off coolant and chips
  • In vibratory or burnishing tanks NOCOR S1 does a great job carrying off fines, and its mild pH is easier to dispose of
  • NOCOR S1 is an economical choice anywhere you need to keep a tank of water from rusting or going “sour” such as water jet cutters, or the tanks under burning tables or laser tables

  • Master STAGES™ NOCOR® S2

    Water-soluble Corrosion Inhibitor

    Master STAGES™ NOCOR S2 is a synthetic, water soluble, ferrous corrosion inhibitor for short-term storage or shipment. Effective at concentrations from 3% - 10% in water, it provides a very thin, water-soluble protective film.

  • The transparent film left by NOCOR S2 is easily removed and will not interfere with additional machining, gauging, or assembly steps
  • Barium free and contains very low levels of volatile organic compounds as applied

  • Master STAGES™ NUTRA 18

    Buffered Alkaline pH Adjuster for Rinse Stages

    NUTRA 18 is a liquid alkaline chemical that provides steel with temporary protection against flash rust. This product is especially suitable for use in the neutralization of steel surfaces after acid pickling or phosphating.

  • Built-in temporary corrosion inhibition
  • Buffered formula provides good pH consistency
  • Can be added manually or by metering pump

  • Master STAGES™ RINSE 100

    Mild Alkaline Detergent

    Master STAGES™ RINSE 100 is a washing compound concentrate that does a great job of removing metalworking fluids and light oily films. This product will not stain ferrous or nonferrous materials and leaves an extremely thin film corrosion inhibitor, which does not interfere with gauging of parts. RINSE 100 is compatible with the TRIM family of cutting and grinding fluid concentrates.

  • Effective machine cleaner
  • Great for general cleaning of loose tools and parts
  • Excellent for use in ultrasonic cleaner systems and immersion washers
  • Provides up to one week or more of in-process corrosion inhibition on ferrous parts

  • Master STAGES™ RPO 2L

    Corrosion-inhibiting Oil

    Master STAGES™ RPO 2L is a nonstaining, water-displacing lubricant and rust preventative. RPO 2L is designed to provide moderate lubrication and indoor rust protection. It is easily removed with alkaline cleaners. RPO 2L meets the requirements of Mil Spec VVL 500.

  • Excellent lubricity
  • Rust protection film remains fluid
  • High flash point
  • Easily removed with detergent cleaner
  • Nonstaining
  • Oxidation resistant
  • Humidity Cabinet Test: 350 hours – no rust (ASTM D1748)
  • Salt Spray Test: very slight @ 4 hours (ASTM B117)

  • Master STAGES™ RP O4

    Rust Preventative




    Master STAGES™ RP O5F

    Rust Preventative Oil




    Master STAGES™ RPO 6BF

    Barium-free, Low Odor, Corrosion Inhibitor

    Master STAGES™ RPO 6BF is a barium-free, nonstaining, water displacing, thin-film corrosion inhibitor or rust preventative which can be used on a variety of metals. RPO 6BF provides indoor corrosion inhibition, excellent protection for bearings and other precision parts, in-process parts in storage, as well as parts in transit.

  • Barium free
  • Light film for limited carryoff
  • Excellent corrosion inhibition, generally in excess of six months in dry storage
  • Nonstaining
  • Provides cleaning action
  • Water displacing to help prevent rust due to water trapped under the protective film
  • Oxidation resistant to resist tarnishing over long storage periods
  • Easily removed with detergent cleaners, such as Master STAGES™ CLEAN 2029 "One Step"
  • Humidity Cabinet Test: No rust at 650 hours (ASTM D1748)

  • Master STAGES™ RPW2F

    Rust Preventative Rinse




    Master STAGES™ SCRAM-X





    Master STAGES™ SkidRid™

    Butyl-Free/Phosphate-Free Floor & Multi-Purpose Cleaner/Degreaser

    Master STAGES™ SkidRid™ is a highly concentrated cleaner built for multiple uses including floor cleaning and general degreasing. In addition to automatic floor scrubbers, it does a great job in general purpose cleaning, mop bucket cleaning, and parts washing in room-temperature wash tanks. SkidRid is completely free of 2-butoxyethanol (Butyl) and is not reportable under SARA section 313.

  • Specially formulated to lift off stubborn tire marks — pre-application from a spray bottle followed by power floor scrubbing can often deal with the most difficult areas
  • Contains no 2-butoxyethanol (Butyl), an ingredient of increasing concern often found in products of this type
  • All of the ingredients used in SkidRid are biodegradable
  • Economical to use because it is very highly concentrated — a little bit goes a long way
  • Can be used for general cleaning tasks and to remove soils from parts and tools
  • Hard water tolerant
  • Mild, pleasant scent
  • Environmental approvals are simplified because SkidRid contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and is not SARA 313 reportable
  • Effective in immersion style washers and ultrasonic baths can be used at room temperature up to 120°F (49°C)
  • Effective mop bucket cleaner in addition to being useful in floor scrubber machines
  • Removes heavy soils from floors without lifting off floor paints, coatings, or leaving a slippery residue; thereby suitable for concrete, painted tile, or linoleum floors

  • Master STAGES™ Skramex™

    High-powered, Non-butyl Floor Cleaner Super Concentrate

    Master STAGES™ Skramex™ is a super concentrated, high-powered cleaner designed for factory floor cleaning and heavy maintenance cleaning, particularly in metalworking or rebuild shops and mills. This product is highly caustic and capable of emulsifying even the most difficult floor soils such as those used in machining, drawing, stamping, foundries, and mills. Skramex is specially formulated without 2-butoxyethanol (Butyl) to eliminate government reporting requirements.

  • Economical because it is super concentrated, Skramex will clean most soils at concentrations of 0.5% or less when used in a power floor scrubber
  • Skramex is formulated specially to remove oils, drawing compounds, carbon residue, and other heavy soils, while not harming concrete (this can be a problem with cheap floor cleaners)
  • Not just a floor cleaner, Skramex works in both power floor scrubbers and mop buckets, and can be used for very heavy-duty maintenance cleaning jobs; also effective and economical when used as a cold-soak cleaner for ferrous parts
  • Your floor scrubber or mop bucket will go further and last longer because Skramex has super high concentrations of surfactants, solvents, and alkaline builders to make it last a long time (this saves you time and reduces waste because you can spend more time cleaning and have less dirty water to dispose of)
  • Environmental approvals are simplified because Skramex contains no nitrites, phosphates, barium, phenols, or 2-butoxyethanol (Butyl); this formula has very low V.O.C. content and no SARA 313 reportable ingredients

  • Master STAGES™ SMC

    High Flash Solvent Machine Cleaner

    TRIM SMC combines powerful solvent action with water washability to provide exceptionally clean surface areas. This combined action makes it particularly applicable to machine conversion from straight oil to water miscible fluids, or for cleaning oil and grease contaminated parts or machinery.

  • Combines the cleaning action of a straight solvent with the advantage of being able to flush and rinse with water
  • Users can accomplish difficult cleaning jobs faster and at a lower cost
  • Can also be used as a pre-cleaner for difficult oily/greasy soils; parts may be immersed, sprayed or brushed with TRIM SMC and then processed in an aqueous spray or immersion washer using any of the fine TRIM CLEAN products
  • Has a high flash point
  • Is nonchlorinated

  • Master STAGES™ Task™

    Water Miscible Washing Compound Concentrate




    Master STAGES™ Task2™ APC

    All-purpose Cleaner

    Master STAGES™ Task2™ All Purpose Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning a variety of shop soils from all common surfaces. Task2 out-cleans all the green, crystal, purple, and blue butyl-based products you may have tried in the past.

  • Use full strength or dilute
  • Versatile all-around shop cleaner
  • Pratt Whitney Aerospace Approval PMC 1455-11
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Task2™ GC

    Glass Cleaner

    Master STAGES™ Task2™ Glass Cleaner is an industrial strength, water-based cleaning agent that does an outstanding job in the industrial environment for cleaning machine tool glass and other hard surfaces.

  • Use full strength
  • For glass and plexiglas shop cleaning
  • Pratt Whitney Aerospace Approval PMC 1406-41
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ Task2™ GF

    Grime Fighter, Super Strength Industrial Cleaner

    Master STAGES™ Task2™ is a grime fighting, industrial strength, non-butyl, water-based cleaning agent that does an outstanding job in the industrial, commercial, or office environment. Task2 out-cleans all the green, crystal, purple, "mean", "complex", and "simple" butyl-based products you may have tried in the past.

  • Use full strength or dilute up to 100:1
  • For the toughest industrial cleaning applications
  • Pratt Whitney Aerospace Approval PMC 1247-1
  • Contains no butyl, caustic, silicate, phosphate, nitrite, phenol, or borate
  • Very low V.O.C. content, and conductivity
  • Environmentally friendly, certified "Readily Biodegradable" by OECD Method 301D (EPA Guideline OPPTS 835.3110)
  • Will not harm TRIM metalworking fluids

  • Master STAGES™ WELD WIPE

    Nonhazardous, Synthetic Weld Anti-spatter

    WELD WIPE is a nonhazardous liquid designed to prevent spattering during welding operations on ferrous metals. WELD WIPE is not an oil based product, but a surfactant based system which actually aids subsequent cleaning operations.

  • Easily cleaned off using water-based cleaners
  • Synthetic formula minimizes residue
  • When properly used saves many hours of sanding prior to finishing operations

  • Master STAGES™ Whamex™

    Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex™ is a safe, fast-acting concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws many years of hands-on experience in machine clean outs
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex contains no nitrites, phosphates, barium, phenols, or butyl cellusolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand semisynthetic and soluble oil coolants, as well as most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • Master STAGES™ Whamex XT™

    Low-foam Machine Tool Sump and System Cleaner

    Master STAGES™ Whamex XT™ is a low foam, safe, fast-acting, concentrated formula that will save machine cleaning downtime while removing the oily residues, scums, and insoluble soap deposits that reduce coolant life. Whamex XT is made for cleaning out machine tool sumps and larger systems, coolant supply lines, and coolant recycling equipment. Whamex XT is compatible with most waste treatment (including ultrafiltration) and will not degrade TRIM metalworking fluids when used as directed.

  • A very specialized formula that draws on many years of hands-on experience in machine cleanouts
  • Quickly breaks down and lifts off insoluble scum deposits hidden in lines and difficult to reach areas — getting rid of these residues is one of the best ways to extend coolant life in your system
  • Very hard water tolerant allowing it to be effective in raw water or used coolant
  • Environmental approvals are simplified because Whamex XT contains no nitrites, phosphates, barium, phenols, or butyl cellosolve; this formula has very low V.O.C. content and no SARA 313 reportable ingredients
  • When used as directed below, this product is compatible with TRIM brand synthetic, semisynthetic, and soluble oil coolants, as well as, most competitive coolants. Will remove heavy soils from machines without affecting paints, coatings, seals, hoses, or skirting, and it won't leave a slippery residue
  • Short-term corrosion inhibitors prevent flash rusting of machine surfaces and ways

  • Master STAGES™ WMMC

    Water Mix Machine Cleaner