TRIM E206KS is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E206KS makes it a first choice for high-quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Has a very wide application range allowing its effective use on cutting and grinding
Extremely hard water tolerance
Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
Provides good tool life and surface finishes
High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
Coolant residue is easily removed with either water, working solution or aqueous cleaners
Good cleaning performance keeps machine tool very clean
Easy recycling or disposal with conventional techniques and equipment
Run effectively for long periods without the need for costly additives
TRIM® E860KS bd
Premium, General-purpose Emulsion - Blue Dye
TRIM E860KS bd is a high quality, blue-dyed, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS bd makes it a first choice for high quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Extremely hard water tolerant
Very wide application range
Suitable for both grinding and machining
Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
In high-speed turning and milling, provides good tool life and surface finishes
Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
Coolant is easily removed with water, working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
Will run effectively for long periods without the need for costly additives
Works very well in general machining where traditional soluble oil may not cool sufficiently
TRIM® HyperSol™ 888NXT
neo-synthetic precision aerospace machining fluid
Experience ultimate versatility
HyperSol 888NXT's neo-synthetic technology masters the art of versatility. Providing exceptional performance on hard aerospace metals such as titanium and high-nickel alloys, stainless steels and Inconel®, it also offers the superior lubricity necessary for machining soft, gummy aluminum alloys. Delivering low foam, low odor and a long running lifespan while meeting the strictest environmental regulations, HyperSol 888NXT is redefining excellence in the coolant industry.
See your production soar to new heights with revolutionary TRIM HyperSol™ 888NXT!
exceptional performance on hard aerospace metals
superior lubricity for machining softer aluminum alloys
trouble-free production
safest, environmentally-friendly ingredients
long-running lifespan delivers high customer value
less scrap, low foam and low odor
TRIM® HyperSol™ 888NXT
TRIM® C270WY
High-performance Synthetic
TRIM C270WY is a state-of-the-art synthetic coolant. C270WY provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness. Meets the needs of the modern job shop for a single premium synthetic coolant for virtually all machining operations.
Compatible with a very wide range of materials including: cast iron, steels and copper alloys, as well as plastics and composites
Provides excellent corrosion inhibition on all common ferrous and nonferrous alloys
Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
Extremely low carry-off for very low total operation costs
Very low foam and mist
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
The residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
Exceptional sump life and very good tramp oil rejection
A very low initial odor level which usually disappears after one to two days
TRIM® C276
Clean-running Synthetic
TRIM C276 is a synthetic coolant that meets the needs of the most modern and demanding manufacturers. C276 makes use of the latest synthetic coolant formulation and specially synthesized oil to produce a versatile product that is clean running, has great sump life, and is kind to both machines and operators. This product will perform well in centerless and cylindrical form grinding as well as on high-speed, single-point turning, and down-the-hole work on vertical and horizontal machining centers.
Very low foam and mist
Provides excellent corrosion inhibition on all common ferrous alloys
Keeps your machines clean while leaving a soft fluid film that protects the bare metal parts of your machine tools - this film is easily washed off with coolant working solution for easy machine cleaning
Excellent extreme pressure (EP) lubricity to do many form grinding, drilling, and tapping operations
Extremely low carryoff for very low total operation costs
Exceptional sump life and very good tramp oil rejection
Low initial charge odor which dissipates further after one or two days
Minimizes the buildup of sticky residues
TRIM® C385
High-lubricity Honing Synthetic
TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.
Very low foam and mist
Great for form grinding, honing, boring, rolling, etc
Exceptional sump life and very good tramp oil rejection
Extremely low carry-off for very low total operating costs
Very low initial odor which usually disappears after 1-2 days
Compatible with dirty or grey cast iron cutting, grinding, and honing
Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips
TRIM® E709FF
Long-life Emulsion
TRIM E709FF is a high quality universal emulsion coolant concentrate. It has been designed for a very broad range of metals allowing its effective use in most cutting and grinding operations, which requires minimal maintenance even in the most demanding fluid management systems. It has the lubricity and "guts" necessary to do heavy-duty machining. The stable and predictable performance of TRIM E709FF makes it a first choice for high-quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Has a very wide application range allowing its effective use on cutting and grinding
Extremely hard water tolerance
Extremely stable fine particle size emulsion to reduce carry-off and super-high penetrability to get the fluid to the point of cut
Provides good tool life and surface finishes
High tramp oil resistance for easy oil remove, longer coolant life and more opportunities to be recycled
Leaves a very light oily, non-gumming residue to prevent sticky ways, chucks, tool holders and fixtures
Coolant residue is easily removed with either water, working solution or aqueous cleaners
Good cleaning performance keeps machine tool very clean
Easy recycling or disposal with conventional techniques and equipment
Run effectively for long periods without the need for costly additives
TRIM® E860KS
Premium, General-purpose Emulsion
TRIM E860KS is a high quality, general-purpose emulsion, which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protective film on the work piece and machine parts to prevent corrosion on metal surfaces including the machine tool. The stable and predictable performance of TRIM E860KS makes it a first choice for high quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Extremely hard water tolerant
Very wide application range
Suitable for both grinding and machining
Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
In high-speed turning and milling, provides good tool life and surface finishes
Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders, and fixtures
Coolant is easily removed with water, working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
Will run effectively for long periods without the need for costly additives
Works very well in general machining where traditional soluble oil may not cool sufficiently
TRIM® MQL™ 1000
Minimum Quantity Lubrication Fluid
TRIM MQL™ 1000 is a high-performance, vegetable ester-based, micro-lubrication fluid. It is fully compatible with all "micro lube" and micro-mist systems. MQL 1000 contains a blend of environmental and operator-friendly materials that provide very high levels of EP and boundary lubrication to control BUE and sliding friction. MQL 1000 out-performs the competition in sawing, drilling, tapping, reaming, and milling, to name just a few. In situations where it is impractical to use a micro-lubrication applicator, MQL 1000 may be manually applied to the tool or the work piece.
Out-performs the more expensive products
Environmentally friendly, renewable resource based
Easily water washable — does not produce hard-to-remove residues
Very low mist
Promotes superior finish and tool life and is compatible with all materials
Very high levels of lubricity with even, minimum quantities of material at the point of cut for high material removal rates
Has been extensively tested and proven in all major brands of micro lube applicators
TRIM® TAP HEAVY
High-lubricity Tapping Fluid
TRIM TAP HEAVY is a 100% synthetic and vegetable-based lubricant possessing strong friction-reducing properties. Designed as a tough operation product for use with metals of low machinability, it's recommended for use at full-strength, brush-on use for reaming, tapping, and threading.
Especially for taps ½" diameter and larger
Contains no mineral oils
Promotes excellent finish
Ensures parts size control
Delivers exceptionally long tool life
Reduces rubbing of the tool flank
Water washable, for easy parts cleaning
Compatible with most TRIM fluids
Use for added lubricity on extremely tough jobs
TRIM® TAP LIGHT
Tapping Fluid
TRIM TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.
Especially for taps ¼" diameter and smaller
Promotes excellent finish
Ensures parts size control
Delivers exceptionally long tool life
Reduces rubbing of the tool flank
Water washable, for easy parts cleaning
Compatible with most TRIM fluids
Use for added lubricity on extremely tough jobs
TRIM® E712
Low Maintenance, General Purpose Emulsion
TRIM™ E712 is high quality universal soluble oil which requires minimal maintenance in even the most demanding fluid management systems. It has broad application in machining and grinding on a wide range of materials. The high levels of both chemical and mechanical lubricity in this product handle the tough machining and grinding jobs. It leaves a very easy to clean protection film on the work piece and machine parts to prevent corrosion on metal surface including the machine tool. The stable and predictable performance of TRIM E712 makes it a first choice for high-quality, consistent parts manufacturing.
Very stable formula provides long operational life with consistent performance
Extremely hard water tolerant
Very wide application range. Suitable for both grinding and machining
Fine particle size emulsion reduces carry-off and facilitates getting the fluid to the point of cut
In high-speed turning and milling, provides good tool life and surface finishes
Protects machine and tool surfaces while also preventing sticky ways, chucks, tool holders and fixtures
Coolant is easily removed with water, working solution or aqueous cleaners
Easy recycling or disposal with conventional techniques and equipment
Will run effectively for long periods without the need for costly additives. Easily recyclable and/or dispose with conventional recycling and/or disposal techniques
TRIM® E860
Low-foam, High-lubricity Emulsion
TRIM™ E860 is a high-quality, general purpose emulsion for use on abroad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.
Very wide application range
Good hard water tolerance
Keeps machine tools clean
Works very well in general machining
Very stable formula provides good operational life with consistent performance
High tramp oil resistance for easy oil removal and longer coolant life
Easily recycled or disposed of using conventional techniques and equipment
Good balance of cooling and lubrication providing good tool life and surface finishes
Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut
TRIM® OG205
High-performance Grinding and Honing Oil
TRIM OG205 is a very-high-specification grinding and honing oil formulated for carbide and HSS tool grinding operations. The product utilizes a very highly refined mineral oil with low aromatic content, which ensures very low levels of mist and high flash point. TRIM OG205 has been formulated to provide excellent wheel flushing properties together with good friction reduction and workpiece cooling.
No reaction with cobalt
Very highly refined base oil ensures low mist and high flash point
Can be used for light duty universal machining operations
Good flushing properties keeps grinding wheels very clean
Excellent friction reducing properties ensures long wheel life
Excellent heat transferring properties
Excellent oxidation stability
Highly filterable in pre-coat filter systems
Low foaming
Kind to machine components and elastomers
Light color and low odor for good operator acceptance
TRIM® OM 210
High-performance, Cutting and Grinding Oil
TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.
Light color and low odor
High flash point
Minimal carry over loss
Excellent chips flushing and low foam
Oxidation inhibited for longer life
Excellent tool life properties
TRIM® OM 222
High-performance Cutting Oil
TRIM OM 222 is a high-performance, light color, straight cutting oil which reduces the formation of built-up edge in cutting hard-to-machine materials. TRIM OM 222 has a balanced extreme-pressure package for excellent finishes and tool life on variety of metals.
Excellent lubricity for efficient metal removal
Light color and low odor for good operator acceptance
Suitable for machining difficult ferrous and stainless steel alloys
High-quality raw materials resist oxidation
Lower viscosity allows better cooling
Safe for use on nonferrous as well as ferrous metals
OM 222 is excellent for use in screw machines and bar-fed, multi-station machines
The multi-metal compatibility of OM 222 makes it an excellent choice where a shop is working with a wide variety of materials
TRIM® MicroSol™ 585XT
Extended-life, Nonchlorinated Semisynthetic
TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.
Dramatically extends useful life without the need for tank-side biocides or fungicides
Low foaming for todays demanding high-pressure, high-volume applications
Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
Optimized combination of cooling and lubricity for titanium machining applications
Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
Provides superior corrosion inhibition on all ferrous and nonferrous metals
Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
Uses standard metalworking recycling and disposal techniques
Superior Metalworking with Low-foaming TRIM® MicroSol® 585XT
TRIM® SC410
Chlorine-free Semisynthetic Coolant
5 drum∗ minimum batch order size. Pricing and delivery available upon request.
TRIM SC410 is a chlorine-free, semisynthetic coolant using vegetable-derived and ester lubricants. It is very clean running in moderate-duty machining and grinding of both ferrous and nonferrous materials. In addition to its broad range of machining qualities, it has been specially optimized for machining "gray iron"castings and for surface and cylindrical grinding of ferrous materials.
Based on our exclusive ester lubricant technology, contains no mineral (petroleum) oil
Low foaming in most operations
Compatible with a very wide range of materials including ferrous, nonferrous, and nonmetallic material
Will provide superior sump life and corrosion inhibition for long periods of time without adds
Prevents chip "clinkering" and "hot" chip hoppers when machining cast iron
Will keep the machine and work environment clean even when machining or grinding gray iron
Contains no chlorine or sulfur-based additives
Contains no nitrites, sulfonates, Alkylphenol Ethoxylates, or phenols and is not SARA 313 reportable
Very low carryoff and long sump life, delivering low operating costs