Solutions Products Support About Us Find a Distributor Contact Us
Solutions Products Support About Us
Solutions Products Support
cutting.svg
S
cutting
Number of products: 7
Application: cutting
Metal: titanium [S]

TRIM™ C270

High-performance Synthetic

TRIM C270 is a state-of-the-art synthetic coolant. C270 provides excellent cooling and chip settling, good tramp oil rejection, and machine cleanliness, and meets the need of the modern job shop for a single premium synthetic coolant for virtually all machining operations.

  • C270 is compatible with a very wide range of materials including: cast iron, steels, and copper alloys, as well as plastics and composites
  • Provides excellent corrosion inhibition on all common ferrous alloys
  • Does a great job in form grinding, drilling, tapping, and reaming operations without chlorine or sulfur-based EP additives
  • Extremely low carryoff for very low total operation costs
  • Very low foam and mist
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts. This residual film is easily resoluble in coolant working solution to facilitate easy machine cleaning and minimize the buildup of sticky residues that can hold machine-destroying chips
  • Exceptional sump life and very good tramp oil rejection
  • A very low initial odor level which usually disappears after one-to-two days

TRIM™ C350

Premium Synthetic Metalworking Fluid

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

  • Meets the most stringent nuclear and aerospace chemical content and machining requirements
  • Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel®, brass, and high-strength alloy steels
  • Water-clear, low foaming, and misting, C350 is a joy to work with and manage
  • Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
  • Easily removed from parts for easy cleanup before assembly, painting, or plating operations
  • PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
  • Very low carryoff and long sump life results in low operating cost

TRIM™ C385

High-lubricity Honing Synthetic

TRIM C385 is a state-of-the-art synthetic coolant which provides excellent cooling and chip removal, good tramp oil rejection and machine cleanliness. C385 meets the need of the modern job shop for a single premium synthetic coolant for honing and virtually all machining operations.

  • Very low foam and mist
  • Great for form grinding, honing, boring, rolling, etc
  • Exceptional sump life and very good tramp oil rejection
  • Extremely low carry-off for very low total operating costs
  • Very low initial odor which usually disappears after 1-2 days
  • Compatible with dirty or grey cast iron cutting, grinding, and honing
  • Keeps your machines clean while leaving a soft, fluid film that protects the bare metal parts
  • The residual film is easily resoluble in the coolant working solution to facilitate easy machine cleaning and to minimize the buildup of sticky residues that can hold machine-destroying chips

TRIM™ E950

High Performance Machining Emulsion

TRIM E950 is a proprietary blend of new vegetable-based technology and premium traditional lubricity additives to yield a very high performance, low management metal removal fluid. This premium emulsion product is operator friendly because of its mild contact nature and low chemical initial-charge odour. TRIM E950 is robust enough to deliver extended useful life and avoid rancid odours normally associated with traditional emulsions. The unparalleled lubricity delivers exceptional surface finish and tool life on difficult to machine aluminium alloys, inconel, titanium, stainless and high tensile strength steels.

  • Delivers unparalleled lubricity
  • Very long sump life and low carry-off rates result in low operating cost
  • Low foam even in soft water areas
  • Hard water tolerant
  • Non-chlorinated and non-sulphurised extreme pressure (EP) additives control built-up edge (BUE) in tough operations on aerospace materials
  • Fine emulsion ensures fast wetting to get the fluid to the point of cut and fully coat the work piece and chips for superior tool life and corrosion prevention
  • Compatible with all materials excluding magnesium
  • Easily recycled or disposed of without special handling or equipment
  • Will run effectively for long periods without the need for costly additives

TRIM™ MicroSol™ 585XT

Extended-life, Nonchlorinated Semisynthetic

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
  • Optimized combination of cooling and lubricity for titanium machining applications
  • Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
  • Uses standard metalworking recycling and disposal techniques

TRIM™ MicroSol™ 590XT

Advanced Technology Aerospace Semisynthetic

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

  • Meets the most stringent aerospace specifications and has received many aerospace approvals
  • Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
  • Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
  • Dramatically extends useful life without the need for tank-side biocides or fungicides
  • Low foaming for todays demanding high-pressure, high-volume applications
  • Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel® machining applications
  • Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
  • Provides superior corrosion inhibition on all ferrous and nonferrous metals
  • Keeps parts and machines very clean to reduce maintenance and production time

TRIM™ TAP LIGHT

Tapping Fluid

TRIM TAP LIGHT is a synthetic/vegetable/mineral oil blend possessing strong friction-reducing properties. Use with metals of low machinability; specifically recommended at full strength for flooding applications involving broaching, sawing, milling, tapping, threading, gear cutting and shaving, gundrilling, and reaming.

  • Especially for taps ¼" diameter and smaller
  • Promotes excellent finish
  • Ensures parts size control
  • Delivers exceptionally long tool life
  • Reduces rubbing of the tool flank
  • Water washable, for easy parts cleaning
  • Compatible with most TRIM fluids
  • Use for added lubricity on extremely tough jobs