WEDOLiT AW 5040

Water-soluble fully synthetic passivating agent

WEDOLiT AW 5040 is a water-soluble passivating agent for steel, which is used as an aqueous solution for a short-term corrosion protection. The product contains no oily or fatty substances and is free of sodium nitrite. Furthermore, it contains a copper and brass inhibitor (for the protection of fittings, etc.).

  • Almost foam free
  • While the protecting film remains water soluble, the product is suitable as a short-term corrosion protection of steel (covered storage)
  • Good skin compatibility

WEDOLiT C 24-K

Assembly Fluid

WEDOLiT C 24-K is a water-soluble, fully synthetic fluid that facilitates the assembly of parts. The product is compatible with most non-ferrous metals and is also suitable for painted surfaces. However, the compatibility should be examined in preliminary tests. The product is also suitable for the expansion or reduction of aluminium tubes.

WEDOLiT C 24-K is approved by VW (Approval Number 29.4433).

  • The outstanding lubrication properties facilitate the assembly of components
  • Reduces friction and wear and thus contributes to a high tool life
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 2370-7

High Performance Grinding Oil

WEDOLiT CN 2370-7 is a low viscous, high performance grinding oil based on the latest gas to liquid (GTL) technology. GTL-base-oils are free of aromatics, chlorine, zinc, nitrogen and heavy metals, to provide the best occupational safety for the worker. The product is suitable for the machining of HSS and carbides (especially with a high cobalt content). The product is also suitable for general cutting operations as well as for gear hobbing.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a long tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 3650-13

High performance cutting oil

WEDOLiT CN 3650-13 is a mineral oil based cutting oil for the manufacturing (especially deep-hole drilling) of steel and aluminium alloys. The product contains a combination of EP- and AW-additives, which increase the cutting performance significantly.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Highly reduced oil mist formation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 5370-12

High-performance cutting oil

WEDOLiT CN 5370-12 is a low viscous, non-water soluble high performance cutting oil based on the latest GTL-baseoil-technology, which was developed for thread cutting operations. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminium and non-ferrous metals.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additivation for thread cutting operations
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 5370-22

High-performance cutting oil

WEDOLiT CN 5370-22 is a low viscous, non-water soluble, high performance cutting oil for thread cutting operations, which is based on the latest base-oil-technology. The product is also suitable for general cutting operations of high alloyed steels, cast iron, aluminium and non-ferrous metals.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Special additivation for thread cutting operations
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a long tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour with an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 6850-26

High performance oil

WEDOLiT CN 6850-26 is a medium viscous high-performance oil for machining steel, stainless steel, cast iron, aluminium and non-ferrous metals. By using this oil, various processes can be avoided such as separate production lines for machining different materials and the preliminary cleaning of non-ferrous metals. The product can be applied undiluted by spraying, flooding or means of rollers.

  • High performance product, which leads to an excellent surface finish and dimensional accuracy
  • Highly reduced oil mist formation, almost no loss of evaporation
  • Reduces friction and wear and thus contributes to a high tool life
  • Offers high cooling properties with a very good wetting behaviour
  • Very good flushing behaviour for an optimal transport of chips and swarf
  • Easily removable with organic solvents or alkaline industrial cleaners
  • A higher or lower viscosity can be created (equal additive content) by variation of the base oil

WEDOLiT CN 8250-2

Minimum quantity lubricant

WEDOLiT CN 8250-2 is a volatilizing high-performance lubricant, designed for use in all types of low and minimum quantity lubrication systems for milling, sawing, thread cutting and cold forming applications of non-ferrous metals

  • High pressure absorption capacity as well as excellent wetting and lubricating effect
  • No gumming and sticking
  • Reduces build-up of material on steels with a low carbon content
  • The excellent cooling and lubricating properties lead to a significant increase in service life of tools and to high dimensional accuracy of workpieces
  • Ensures extremely economical use
  • Can be easily and safely removed by spray, immersion and ultrasonic cleaning with neutral or alkaline industrial cleaners or with organic solvents

WEDOLiT CN 8471-36

High performance cutting and forming oil

WEDOLiT CN 8471-36 is an ester-based high-performance lubricant, suitable for all kinds of minimum quantity lubrication systems, e.g. for milling, sawing or thread forming, of steel, aluminium and non-ferrous metals.

  • Stable load carrying capacity and a homogenous sliding behaviour
  • Very good wetting ability and film formation without adhesion
  • The outstanding cooling- and lubrication properties lead to significantly reduced friction and wear and thus contribute to a high tool life
  • Leads to clean surfaces and contributes to achieve dimensional accuracy
  • Economical application
  • Very good oxidation stability
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CN 8570-25

Minimum quantity lubricant

WEDOLiT CN 8570-25 is a liquid, odour-less, water insoluble high-performance lubricant, suitable for all kinds of minimum quantity lubrication systems, e.g. for milling, sawing or thread forming, of steel, aluminium and non-ferrous metals.

  • Stable load carrying capacity and a homogenous sliding behaviour
  • Very good wetting ability and film formation without adhesion
  • The outstanding cooling- and lubrication properties lead to significantly reduced friction and wear and thus contribute to a high tool life
  • Leads to clean surfaces and contributes to achieve dimensional accuracy
  • Economical application
  • Almost no mist formation and residues
  • Very good oxidation stability
  • Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT CS 6206

Water Soluble, High Performance Lubricant

WEDOLiT CS 6206 is suitable for grinding of steel, cast iron, aluminium, non-ferrous metals, glass and especially carbides.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility


  • Recommended mixing ratio
  • Grinding:  from 4%
  • General cutting:  from 6%

WEDOLiT CS 8208

Water-miscible, fully synthetic coolant

WEDOLiT CS 8208 is suitable for ultrasonic testing systems. The product is also suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration of 5 - 10%). Not suitable for the manufacturing of workpieces made of zinc, aluminium and their alloys.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a good skin compatibility
  • Due to its thermal stability, the product can be used in almost the whole process chain of welded tubes (forming, welding, calibration, sawing)

WEDOLiT CW 6336

Water-miscible, conventional coolant

WEDOLiT CW 6336 is suitable for grinding as well as light to heavy cutting operations of steel, cast iron, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), and non-ferrous metals*.

WEDOLiT CW 6336 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for the aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Good soft water stability (at approximately 5°dH)
  • Almost free of foam
  • Offers a very good skin compatibility

WEDOLiT CW 6506

Water-miscible, conventional coolant

WEDOLiT CW 6506 is suitable for light to heavy cutting operations of steel, stainless steel, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series), titanium and non-ferrous metals*.

WEDOLiT CW 6506 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for the aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility

WEDOLiT CW 6546

Water-miscible coolant

WEDOLiT CW 6506 is suitable for light to heavy cutting operations of steel, stainless steel, aluminium (e.g. sensitive aluminium alloys of the 2000 and 7000 series) and non-ferrous metals.

WEDOLiT CW 6506 is approved by CETIM according to specification EADS ASN 42302 annex 2, DASSAULT DQGT 0.4.2.0065 index D and by Bombardier BAMS 569-001 rev. B, for the aerospace industry.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility

WEDOLiT CW 8906

Water-miscible, ester-based coolant

WEDOLiT CW 8906 is suitable for grinding as well as light to heavy cutting operations of steel, stainless steel, aluminium and titanium.

  • Offers high cooling- and flushing properties with a very good wetting behaviour
  • Contributes to a high tool life
  • Very good application stability
  • Almost free of foam
  • Offers a very good skin compatibility

WEDOLiT N 22-NV

Washing and forming oil

WEDOLiT N 22 NV is a thixotropic water insoluble washing oil for cleaning metal sheets and coils. The product is usually used in washing machines at ambient temperatures. Increasing the temperature to approx. 60 °C enhances the washing effect. The oil film that remains on the surface after the washing process offers sufficient forming properties for medium to heavy forming operations (for cold forming of uncoated and galvanized steel and for and aluminum).

Approved by Volkswagen (VW-Material-Nr. 29.4186) and by Mercedes Benz (Nr. 34/95-10576 VWT).

  • Compatible (according to tests and our experience) with all for the automotive industry typical adhesives and paints (KTL)
  • Acts as a corrosion protection agent. Therefore, a post-treatment of the drawn sheets is not necessary
  • An ageing stable film is formed after drawing
  • Can easily be removed with organic solvents or water soluble, mild industrial alkaline cleaning agents, even after long storage periods
  • A phosphating can easily be conducted after degreasing

WEDOLiT N 52

Universal cutting oil

WEDOLiT N 52 is a mineral-oil based high-performance lubricant, suitable for all kinds of minimum quantity lubrication systems such as milling, sawing or thread forming steel, aluminium and non-ferrous metals*.
Approved by Rattunde & Co as a cutting oil for minimum quantity lubrication.

  • Stable load carrying capacity and a homogenous sliding behaviour
  • Very good wetting ability and film formation without adhesion
  • Outstanding cooling and lubrication properties lead to significantly reduced friction and wear and thus contribute to long tool life
  • Leads to clean surfaces and contributes to achieving dimensional accuracy
  • Economical application
  • Easily removable with organic solvents or alkaline industrial cleaners