The Future of Corrosion Protection
Straightening oils with high corrosion protection
Ideal for short-term corrosion protection of
dry workpieces, suitable for light forming
operations, VOC free
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Brown, clear |
Visual |
| Density at 15°C: |
0.85 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
10.5 mm2/s |
ASTM D 7042 |
| Flash point: |
> 100 °C |
DIN EN ISO 2719 |
| Film weight: |
1.2 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
None |
Internal test method |
| Water separation: |
18 min |
Internal test method |
| Humidity test: |
60 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
24 h |
DIN EN ISO 9227 NSS |
Corrosion protection for overseas transportation with dewatering effect
Good universal corrosion protection for short
to mid-term storage
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Lightly brown, clear |
Visual |
| Density at 15°C: |
0.79 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
1.6 mm2/s |
ASTM D 7042 |
| Flash point: |
> 40 °C |
DIN EN ISO 2719 |
| Film weight: |
0.5 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
7 min |
Internal test method |
| Humidity test: |
20 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
8 h |
DIN EN ISO 9227 NSS |
Good universal corrosion protection for
mid-term storage
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Brown, clear |
Visual |
| Density at 15°C: |
0.80 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
1.9 mm2/s |
ASTM D 7042 |
| Flash point: |
> 40 °C |
DIN EN ISO 2719 |
| Film weight: |
1.2 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
90 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
24 h |
DIN EN ISO 9227 NSS |
Outstanding universal corrosion protection for
long-term overseas transportation
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Brown, clear |
Visual |
| Density at 15°C: |
0.81 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.2 mm2/s |
ASTM D 7042 |
| Flash point: |
> 40 °C |
DIN EN ISO 2719 |
| Film weight: |
1.4 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
8 min |
Internal test method |
| Humidity test: |
150 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
60 h |
DIN EN ISO 9227 NSS |
Maximum performance for all requirements
(indoor storage and overseas transportation)
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.82 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
3.2 mm2/s |
ASTM D 7042 |
| Flash point: |
> 45 °C |
DIN EN ISO 2719 |
| Film weight: |
2.4 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
19 min |
Internal test method |
| Humidity test: |
180 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
80 h |
DIN EN ISO 9227 NSS |
Thin film wax corrosion protection, no influence
on subsequent processes, for mid-term storage
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.81 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.3 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
0.5 g/m2 |
Dipping procedure |
| Film type: |
Microwax |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
90 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
24 h |
DIN EN ISO 9227 NSS |
Corrosion protection with an outstanding
performance, for overseas long-term
transportation
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.82 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.8 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
1.4 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
9 min |
Internal test method |
| Humidity test: |
120 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
48 h |
DIN EN ISO 9227 NSS |
Maximum performance for all requirements
(indoor storage and overseas transportation)
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.83 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
4.1 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
2.4 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
23 min |
Internal test method |
| Humidity test: |
150 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
80 h |
DIN EN ISO 9227 NSS |
VOC free for short-term corrosion protection
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.84 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
11.2 mm2/s |
ASTM D 7042 |
| Flash point: |
> 100 °C |
DIN EN ISO 2719 |
| Film weight: |
1.3 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
16 min |
Internal test method |
| Humidity test: |
40 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
6 h |
DIN EN ISO 9227 NSS |
VOC free for short-term corrosion protection
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Yellow-medium-brown, clear |
Visual |
| Density at 15°C: |
0.86 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
13.8 mm2/s |
ASTM D 7042 |
| Flash point: |
> 120 °C |
DIN EN ISO 2719 |
| Film weight: |
1.5 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
17 min |
Internal test method |
| Humidity test: |
50 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
2 h |
DIN EN ISO 9227 NSS |
VOC free for mid-term corrosion protection
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Yellow-medium-brown, clear |
Visual |
| Density at 15°C: |
0.86 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
21.5 mm2/s |
ASTM D 7042 |
| Flash point: |
> 130 °C |
DIN EN ISO 2719 |
| Film weight: |
2.2 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
20 min |
Internal test method |
| Humidity test: |
70 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
12 h |
DIN EN ISO 9227 NSS |
High performance dewatering fluids
Very fast dewatering, offers short-term corrosion protection, lower flash point
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Bright yellow, clear |
Visual |
| Density at 15°C: |
0.79 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.2 mm2/s |
ASTM D 7042 |
| Flash point: |
> 40 °C |
DIN EN ISO 2719 |
| Film weight: |
0.3 g/m2 |
Dipping procedure |
| Film type: |
Very slightly oily |
Haptical |
| Dewatering effect: |
≤ 5 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
10 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
DIN EN ISO 9227 NSS |
Very fast dewatering, offers short-term corrosion protection,
higher flash point
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Bright yellow, clear |
Visual |
| Density at 15°C: |
0.80 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.8 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
0.3 g/m2 |
Dipping procedure |
| Film type: |
Very slightly oily |
Haptical |
| Dewatering effect: |
≤ 5 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
7 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
DIN EN ISO 9227 NSS |
Fast dewatering, offers mid-term
corrosion protection
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Bright yellow, clear |
Visual |
| Density at 15°C: |
0.80 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
2.8 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
1.0 g/m2 |
Dipping procedure |
| Film type: |
Vaseline |
Haptical |
| Dewatering effect: |
≤ 10 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
30 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
DIN EN ISO 9227 NSS |
Very fast dewatering, offers short-term
corrosion protection, VOC free version
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Bright yellow, clear |
Visual |
| Density at 15°C: |
0.81 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
4.1 mm2/s |
ASTM D 7042 |
| Flash point: |
> 100 °C |
DIN EN ISO 2719 |
| Film weight: |
0.3 g/m2 |
Dipping procedure |
| Film type: |
Very slightly oily |
Haptical |
| Dewatering effect: |
≤ 5 s |
Internal test method |
| Water separation: |
4 min |
Internal test method |
| Humidity test: |
7 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
DIN EN ISO 9227 NSS |
Wax based products
Waxy high performance product, potentially
for outdoor storage, very quick drying time
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
White-beige, cloudy |
Visual |
| Density at 15°C: |
0.79 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
17.0 mm2/s |
ASTM D 7042 |
| Flash point: |
> 26 °C |
DIN EN ISO 2719 |
| Film weight: |
10.0 g/m2 |
Dipping procedure |
| Film type: |
Waxy |
Haptical |
| Dewatering effect: |
None |
Internal test method |
| Water separation: |
None |
Internal test method |
| Humidity test: |
720 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
200 h |
DIN EN ISO 9227 NSS |
Thick, waxy high performance product,
potentially for outdoor storage
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Black, cloudy |
Visual |
| Density at 15°C: |
0.81 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
74.0 mm2/s |
ASTM D 7042 |
| Flash point: |
> 38 °C |
DIN EN ISO 2719 |
| Film weight: |
28.0 g/m2 |
Dipping procedure |
| Film type: |
Waxy |
Haptical |
| Dewatering effect: |
None |
Internal test method |
| Water separation: |
None |
Internal test method |
| Humidity test: |
1500 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
220 h |
DIN EN ISO 9227 NSS |
New generation ester-based corrosion protection
Ester-based dewatering fluid, no negative labelling, mineral oil free
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Light yellow, clear |
Visual |
| Density at 15°C: |
0.86 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
11.2 mm2/s |
ASTM D 7042 |
| Flash point: |
> 160 °C |
DIN EN ISO 2719 |
| Film weight: |
0.5 g/m2 |
Dipping procedure |
| Film type: |
Slightly oily |
Haptical |
| Dewatering effect: |
≤ 30 s |
Internal test method |
| Water separation: |
12 min |
Internal test method |
| Humidity test: |
14 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
DIN EN ISO 9227 NSS |
Ester-based corrrosion protection, no negative labelling, mineral
oil free
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Yellow, clear |
Visual |
| Density at 15°C: |
0.95 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
63.6 mm2/s |
ASTM D 7042 |
| Flash point: |
> 160 °C |
DIN EN ISO 2719 |
| Film weight: |
0.8 g/m2 |
Dipping procedure |
| Film type: |
Slightly oily |
Haptical |
| Dewatering effect: |
None |
Internal test method |
| Water separation: |
None |
Internal test method |
| Humidity test: |
30 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
8 h |
DIN EN ISO 9227 NSS |
Multi-purpose oils
Multi-purpose oil, with forming properties, also
available in aerosol cans (WEDOLiT KS 3000)
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Medium-brown, clear |
Visual |
| Density at 15°C: |
0.83 g/cm3 |
ASTM D 7042 |
| Viscosity at 20°C: |
4.4 mm2/s |
ASTM D 7042 |
| Flash point: |
> 60 °C |
DIN EN ISO 2719 |
| Film weight: |
1.8 g/m2 |
Dipping procedure |
| Film type: |
Oily |
Haptical |
| Dewatering effect: |
≤ 60 s |
Internal test method |
| Water separation: |
5 min |
Internal test method |
| Humidity test: |
70 cycles |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
8 h |
DIN EN ISO 9227 NSS |
Water-miscible corrosion protection
Water-miscible parts cleaner, very good corrosion
protection, application at approximately 60°C,
for steel and non-ferrous metals
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Dark brown, clear-slightly turbid |
Visual |
| Density at 15°C: |
0.91 g/cm3 |
ASTM D 7042 |
| Viscosity at 40°C: |
44.0 mm2/s |
ASTM D 7042 |
| Flash point: |
> 100 °C |
DIN EN ISO 2719 |
| pH-value [20%; 70°C]: |
9.8 |
DIN EN ISO 10523 |
| Conductivity [20%; 70°C]: |
1850 µS/cm |
DIN EN 27888 |
Corrosion protection properties
| Concentration: |
10% |
20% |
100% |
Tested according to |
| Film weight: |
1.8 g/m2 |
4.7 g/m2 |
5.2 g/m2 |
Dipping procedure |
| Humidity test: |
> 1 d |
> 2 d |
> 4 d |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 2 h |
< 16 h |
> 24 h |
DIN EN ISO 9227 NSS |
Water-miscible parts cleaner, application at
approximately 60°C, for steel and non-ferrous
metals, Rattunde approval
Physical Properties Typical Data
| Parameter |
Typical results |
Tested according to |
| Appearance: |
Dark brown, clear-slightly turbid |
Visual |
| Density at 15°C: |
0.97 g/cm3 |
ASTM D 7042 |
| Viscosity at 40°C: |
108.0 mm2/s |
ASTM D 7042 |
| Flash point: |
> 100 °C |
DIN EN ISO 2719 |
| pH-value [20%; 70°C]: |
8.5 |
DIN EN ISO 10523 |
| Conductivity [20%; 70°C]: |
4500 µS/cm |
DIN EN 27888 |
Corrosion protection properties
| Concentration: |
10% |
20% |
100% |
Tested according to |
| Film weight: |
0.8 g/m2 |
1.2 g/m2 |
5.2 g/m2 |
Dipping procedure |
| Humidity test: |
> 1 d |
> 2 d |
> 4 d |
DIN EN ISO 6270-2 AHT |
| Salt spray performance: |
< 1 h |
< 1 h |
> 1 h |
DIN EN ISO 9227 NSS |
