TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C290 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of general aluminum parts. C290 is a high performance, easy to use and maintain, metal removal fluid with very high levels of usable lubricity at the point-of-cut. C290's unique chemical formula allows great, nonferrous corrosion prevention on most aluminum alloys.

• Great resistance to corrosion on nonferrous materials including aerospace aluminums 6061, 7075, 2024, 3000
• Water-clear, low-foaming and -misting, C290 is a joy to work with and manage
• Provides good results in a wide range of grinding and machining operations
• Excellent tramp oil rejection
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM C350 is a synthetic metalworking fluid optimized for the chemical, environmental, and machining requirements of the North American aerospace industry. C350 uses the best of the new ester technology to yield a very high performance, easy to use and maintain metal removal fluid. The combination of the proven synthetic ester technology and nonchlorinated EP package produces very high levels of usable lubricity at the point-of-cut. C350's unique chemical formula allows superior, nonferrous corrosion prevention particularly on aerospace aluminum alloys.

• Meets the most stringent nuclear and aerospace chemical content and machining requirements
• Superior resistance to corrosion on both nonferrous and ferrous materials including aerospace aluminums 7075, 2024, 3000, titanium, Inconel^®, brass, and high-strength alloy steels
• Water-clear, low foaming, and misting, C350 is a joy to work with and manage
• Provides superior results in a wide range of operations from general grinding to spar milling and turbine blade manufacture
• Easily removed from parts for easy cleanup before assembly, painting, or plating operations
• PRTR compliant, no SARA 313 reportable chemistry. Product contains no chlorine, phenol, nitrites, copper, triazine, or silicone
• Very low carryoff and long sump life results in low operating cost

TRIM E860 is a high-quality, general purpose emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E860 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM E9010BX is a soluble oil coolant concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.

• Contains a proven and highly effective extreme-pressure (EP) additive to control built-up edge (BUE)
• Has a very wide application range allowing its effective use on such diverse operations as production, surface and centerless grinding, heavy duty broaching, gear hobbing and replacing straight oil on some types of screw machines
• Extremely stable fine particle size emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a oily fluid, nongumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with either water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E9010BX is a soluble oil coolant concentrate designed as a general purpose multi-metal coolant for general machining of ferrous and nonferrous materials. It has the lubricity and "guts" necessary to do heavy-duty machining center work and still provide the wetting and cooling necessary to do high-speed turning and grinding operations.

• Contains a proven and highly effective extreme-pressure (EP) additive to control built-up edge (BUE)
• Has a very wide application range allowing its effective use on such diverse operations as production, surface and centerless grinding, heavy duty broaching, gear hobbing and replacing straight oil on some types of screw machines
• Extremely stable fine particle size emulsion to reduce carryoff and to facilitate getting the fluid to the point of cut
• Rejects tramp oil to help extend sump life and increase recycling options
• Leaves a oily fluid, nongumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Coolant residue is easily removed with either water, working solution, or aqueous cleaners
• Easy recycling or disposal with conventional techniques and equipment

TRIM E935 is a premium universal emulsion for use on a broad range of ferrous and nonferrous metals, effective in most cutting and grinding operations. The stable and predictable performance of E935 makes it a first choice for precision and consistent parts manufacturing.

• Very wide application range
• Good hard water tolerance
• Keeps machine tools clean
• Works very well in general machining
• Very stable formula provides good operational life with consistent performance
• High tramp oil resistance for easy oil removal and longer coolant life
• Easily recycled or disposed of using conventional techniques and equipment
• Good balance of cooling and lubrication providing good tool life and surface finishes
• Leaves a very light, oily, non-gumming residue to prevent sticky ways, chucks, tool holders, and fixtures
• Extremely stable fine particle size emulsion allows for reduced carry-off and super-high penetrability to get the fluid to the point of cut

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 585XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine-friendly characteristics you expect from a premium TRIM coolant. While it is particularly well suited for machining and grinding gray iron, it does very well in mixed metal situations. MicroSol 585XT has proven to be an exceptional machining fluid for titanium alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of material including cast iron, steels, copper, titanium, and aluminum alloys, and many plastics and composites
• Optimized combination of cooling and lubricity for titanium machining applications
• Provides superior corrosion inhibition on cast iron and eliminates "hot chip" and clinkering problems
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, and chlorinated or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 590XT is an environmentally-friendly semisynthetic, microemulsion coolant formulated to pass aerospace approval test requirements. It utilizes the newest technology to provide long life and excellent protection of sensitive alloys. MicroSol 590XT improves on the proven performance of previous generations with a robust stability package using the most environmentally-safe ingredients. The formula is a favorite of environmental advocates, safety professionals, and demanding production managers.

• Meets the most stringent aerospace specifications and has received many aerospace approvals
• Protects and prevents corrosion on sensitive alloys, including aerospace and nuclear materials
• Free of chlorine, triazine, formaldehyde releasers, phenols, boron,and secondary amines
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Low foaming for todays demanding high-pressure, high-volume applications
• Optimized combination of cooling and lubricity for titanium, aluminum, steel, stainless steel, and Inconel^® machining applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps parts and machines very clean to reduce maintenance and production time

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 690XT is a high-lubricity, semisynthetic, microemulsion coolant. The formula delivers extended sump life and better foam control versus previous generation semisynthetics. It provides excellent cooling and mechanical lubricity, along with the machine friendly characteristics you expect from a premium TRIM coolant. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys.

• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Boron and halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Contains no nitrites, triazines, phenols, chlorinated, or sulfurized EP additives
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Uses standard metalworking recycling and disposal techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM MicroSol 692XT is a high-lubricity, semisynthetic, microemulsion coolant. This formula delivers extended sump life, greater bio stability, and better foam control versus previous generation semisynthetic Microemulsions. It does very well in mixed metal situations and is compatible with a very wide range of materials including titanium, high nickel alloys, steels, copper, and aluminum alloys. Improved tramp oil rejection keeps your production running smoothly. Increase your profitability and production with TRIM MicroSol 692XT!

• Improved lubricity for longer tool life
• Dramatically extends useful life without the need for tank-side biocides or fungicides
• Halogen free
• Low foaming for todays demanding high-pressure, high-volume applications
• Excellent alternative to chlorinated soluble oils on high-silica aluminum alloys
• Provides superior corrosion inhibition on all ferrous and nonferrous metals
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Requires no special disposal or recycling techniques

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM OM 210 is a low-odor, light-colored oil designed for operations where low viscosity and high lubricity are required. In addition to general machining, OM 210 is particularly effective in deep-hole drilling and creepfeed grinding where its ability to flow into the cutting zone and "wet" the surfaces increases tool life and reduces heat.

• Light color and low odor
• High flash point
• Minimal carry over loss
• Excellent chips flushing and low foam
• Oxidation inhibited for longer life
• Excellent tool life properties

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM™ SC310 is a high-oil, semichemical coolant. This product combines the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. SC310 is well-suited for general, high-speed machining and grinding of all materials.

• Compatible with a very wide range of material including: cast iron, steels, copper, and many plastics and composites
• Provides superior corrosion inhibition on all ferrous and nonferrous metals and eliminates “hot chip” and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Extremely effective EP additive package
• Contains no nitrites, heavy metals, phenolic compounds
• Easy recycling or disposal with conventional techniques and equipment

TRIM SC538 a high-performance semisynthetic coolant. Provides superior aluminum machinability, boundary lubrication, and produces a very high quality surface finish. Can also be utilized for ferrous and non-ferrous metal materials, stainless steel, and aerospace alloy materials. SC538 has good lubricity and friction reducing qualities in high-speed cutting and grinding applications.

• Provides superior aluminum machinability
• Very high quality surface finish
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Low odor and mist makes for an operator friendly product
• Easy recycling and disposal with conventional techniques and equipment

TRIM SC9030 is a high-oil semisynthetic coolant. This product provides the cooling, rust inhibition, and wetting of a premium synthetic with the mechanical lubricity and machine "friendliness" of a soluble oil. TRIM SC9030 is well suited for general high-speed machining and grinding of all materials and it leaves soluble emulsion oil as residue.

• Compatible with a very wide range of materials including cast iron, steels, copper, aluminum alloys, and many plastics and composites
• Provides superior corrosion inhibition on cast iron and other ferrous and nonferrous materials; and eliminates the "hot chip" and clinkering problems often seen when machining cast iron
• Keeps machines very clean while leaving a soft fluid film for ease of cleaning and reduced maintenance
• Has exceptional sump life and very low makeup for extremely low total operating cost
• Low odor and mist makes for an operator-friendly product
• Easy recycling or disposal with conventional techniques and equipment