WEDOLiT FN 1190-2300 is a highly viscous, chlorine containing forming oil for tube drawing and other cold forming operations of stainless steel. The undiluted product is usually applied by brushes or by means of rollers.

• Stable load carrying capacity and a homogenous sliding behavior
• Reduces friction and wear and thus contributes to a high tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behavior, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to achieving dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners
• Soluble in chlorinated hydrocarbons

WEDOLiT FN 4455-55 is a low viscous, water-insoluble lubricant for heavy forming operations of steel and non-ferrous metals. A combination of EP additives offers a outstanding performance for precision cutting operations. The undiluted product is usually applied by spraying, dipping, brushing, or rolling.

• Stable load carrying capacity and a homogenous sliding behavior
• Reduces friction and wear and thus contributes to a long tool life
• Outstanding wetting ability and film formation without adhesion
• Stable cold start behavior, prevents stick-slip and chatter
• Leads to clean surfaces and contributes to dimensional accuracy
• Easily removable with organic solvents or alkaline industrial cleaners

WEDOLiT FW 3500 is a high-pressure agent for hydroforming-processes such as internal and external high pressure forming of steel plates, with different surface qualities and thicknesses. The product can also be applied in different grinding and cooling operations.

Approved by “FF Fluid Forming“

• Offers very good high-pressure properties
• Contributes to a high tool life
• Very good application stability
• Almost free of foam
• Offers very good skin compatibility


Recommended mixing ratio
• Hydrofroming:  from 5 - 10%
• Grinding:  from 3 - 6%

WEDOLiT FW 3500 is a high-pressure agent for hydroforming-processes such as internal and external high pressure forming of steel plates, with different surface qualities and thicknesses. The product can also be applied in different grinding and cooling operations.

Approved by “FF Fluid Forming“

• Offers very good high-pressure properties
• Contributes to a high tool life
• Very good application stability
• Almost free of foam
• Offers very good skin compatibility


Recommended mixing ratio
• Hydrofroming:  from 5 - 10%
• Grinding:  from 3 - 6%

WEDOLiT FW 7840 is suitable for the manufacturing of welded steel tubes. It fulfils the requirements regarding lubrication and cleanliness of the tubes and rollers as well as the corrosion protection of the tubes and the system (in a concentration from 7%).

The product is approved by Mercedes-Benz Group AG (formerly Daimler AG) (QSO 040305) under the name WEDOLiT K 911.

• Due to its thermal stability, the product can be used in the whole production line (forming, welding, calibration, sawing)
• Can be centrifuged without loss of active substances
• Removable with organic solvents or alkaline industrial cleaners
• A bright workpiece surface is obtained after annealing


Recommended mixing ratio
• Tube welding:  from 7%